Submersible petrol pumps - Import export

The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell

When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins. * available in special immersion depths on request * equipped with self-lubricating, liquid-wetted plain bearings. Features & Advantages * High flow rate * High efficiency * Smooth running * Low space requirement * Easy commissioning * Easy to maintain * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Electronic fuel pumps for injection engines or carburetor engines. The small carburetor pumps are ideal for transferring fuel between the catch tank and the tank.

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions.

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Possibility of installation on mechanical arm Dredging systems (side excavators or dredging head) available on request Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Chemical pumps of the CHEM series are used as a modified version as submersible pumps for emptying drums and containers. For example, chemicals such as liquid sulphur are pumped at temperatures up to 150 °C. The series is well suited to transfer low-viscosity media at relatively high pressures. — For viscosities up to 1.000.000 mPas — Temperatures up to 500 °C as special version — Differential pressures up to 120 bar — Suction pressures from vacuum to 15 bar Submersible suspension pumps are designed in such a way that the pumps are submerged in the container with the medium and the medium is sucked in via the flangeless suction side. The medium then enters the process from the tank via a pipe from the discharge side. Submersible suspension pumps are often made of special or stainless steels. A special feature of these pumps, as a rule no additional seals are required on the pump. Only the tank is sealed towards the atmosphere.

Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity

Plastic immersion pumps series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the construction. Impellers: semi-open Fluids: industrial water; warm, cold, with and without chemical admixtures, distilled, deionized Volumetric delivery: up to 400 l/min Delivery head: up to 42 m Please contact us for delivery quantity

https://www.sumpas.com.tr/sumpas-pump-motor_4_c_en.html

• Class: F • Frequency: 50 Hz. • Outer Diameter: 141 mm • Motor Power Range: 5,5 HP - 60 HP • Axial load carrying capacity: 20 kN in 5,5HP-30 HP motors and 26,6 kN in 35HP-60HP motors • Based on 6" NEMA standards • Starting: Direct and Star-Delta • Supply Voltage: ~3, 380/415 V (-%6+%10), • Motor protection: IP 68 Mechanical Seal • Submersion depth: Standard upper limit • Temperature of working environment: Max. 30º C • Speed of cooling water around the motor: Minimum 16 cm/sec.

WQ submersible sewage pump is used in the discharge of seriously polluted industrial and commercial wastewater, sewage station in residential area, drainage system of urban sewage treatment plant, drainage station of civil air defense system, water supply device of waterworks, sewage discharge of hospitals and hotels, municipal engineering construction sites, exploration, mine auxiliary machinery, rural biogas digester, farmland irrigation and other industries, as well as sewage with conveyor belt particles. It can also be used for clean water and corrosive media.

WQ submersible sewage pump is used in the discharge of seriously polluted industrial and commercial wastewater, sewage station in residential area, drainage system of urban sewage treatment plant, drainage station of civil air defense system, water supply device of waterworks, sewage discharge of hospitals and hotels, municipal engineering construction sites, exploration, mine auxiliary machinery, rural biogas digester, farmland irrigation and other industries, as well as sewage with conveyor belt particles. It can also be used for clean water and corrosive media.

Vertical semi-submersible pumps are designed to solve the problem of pumping liquid out of a tank when a part of the pump is within the pumped medium. Pump units are used with the engine speed up to 3,000 rpm. Therefore, the temperature conditions for semi-submersible pumping units are up to 250 degrees. Centrifugal semi-submersible pumps are widely used both in petroleum refining (petroleum and drainage pumps) and the chemical industry, and in the food industry. They are used for transit of various liquids and mixtures including explosive and flammable fluids (oil and gas products, etc.). Semi-submersible pumps are in between surface and submersible units and combine all their advantages, nevertheless, a semi-submersible pump is not designed to carry out specialized tasks for which these two types of units were created. Semi-submersible pumps consist of an electric motor, a working section and immersed sections. The engine is placed on a base plate

Villina-GNVCP-2T type vertical electric semi-submersible pumping units are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These are used in gas, petrochemical, petroleum refining and other industries. The vertical semi-submersible pump – the pump part is fully or partially in the pumped liquid. The unit consists of a pump part, drive sections, a base plate, a device that transmits torque from the drive, an electric motor (drive). The ground part comprises a console fastened to the base plate, an electric motor mounted and fastened to the console, and a mechanical seal support system fastened to a base plate. The semi-submersible part comprises drive sections fastened to the base plate, an elastic coupling body connected to the lower drive section, a pump connected to the elastic coupling body and a discharge line.

General QJ/QJR Submersible Borehole Pump (Deep Well Pump) designed for pumping clean water from deep wells, rivers, reservoirs and mines etc., as well as applications in industrial water supply , agricultural irrigation projects. Fire fighting and so on. QJR is specially designed for geothermal applications featured by heat-resisting, anti-corrosion and anti-aging properties, water temperature up to 90℃ Construction & Features Compact vertical centrifugal multi-stage design with perfect standardization and generalization, easy operation and convenient maintenance. A complete electric submersible pump includes a water pump set, electric motor, a discharge piping, water-proof cable and a control panel. Submersible motor filled with clean water for cooling and lubrication. And the pressure regulation switch, located at the bottom of motor, shall automatically operate to balance the pressure fluctuation caused by temperature variations.

ADVANTAGES - GNVC-P vertical semi-submersible pumps are developed and manufactured according to individual parameters of the Customer and in compliance with normative documents. - Time of manufacture: 90 days. - Warranty period: 24 months. - Chemical pumps are capable of pumping liquids with viscosity up to 35 cSt, and density up to 2,000 kg/m3. PERFORMANCE SPECIFICATIONS - Purpose: transit of corrosive, toxic, explosive and flammable fluids; - Pump rate ranges: 1 to 55 m3/h; - Head ranges: 5 to 250 m; - Seal type: a magnetic coupling according to API 685 with a sealing sleeve made of Hastelloy alloy (standard version) ensures 100% tightness; - Temperature of the pumped fluid: up to plus 250°С; - Shaft speed: 2,900 rpm; - Structural design: type VS4 according to API 610, vertical type, fixed installation on the container neck on the base plate; - Submergence: 1 to 6 metres, with a length increment of 10 cm for the choice of a specific immersed part length of the pump.

A pump is a mechanical device for moving a fluid from a lower to a higher location, or from a lower to a higher pressure area. The fluid can be any type of liquid or gas, and pumps may be classified in many ways according to their purpose, specifications, environment, design, etc. Pumps are used in a wide range of industrial and residential applications. Pumping equipment is extremely diverse, varying in type, size, and materials of construction. Classifications and Types: Pumps may be classified on the basis of the applications they serve, the materials from which they are constructed, the liquids they handle, and even their orientation in space. All such classifications, however, are limited in scope and tend to substantially overlap each other. A more basic system of classification first defines the principle by which energy is added to the fluid, goes on to identify the means by which this principle is implemented, and finally delineates specific geometries.