Support plate - Import export

DALMINEX support plate (suitable for telescop-cap and with locking for position indicators)

OEM Spare Parts for Concrete Pumps

Used with post Mounting point M16 Powder coated Electrostatic pow der cexited (Baked)

Special FTJ filter fleeces are particularly suitable as precoat or support fleece on horizontal plate pressure filters or plate filters The following precoat agents are used: Diatomaceous earth Bleaching earth Cellulose Cornmeal The FTJ nonwovens Cora®Dot and Cora®Spun effect corresponding savings on precoat agents with extremely fine filtration.

steel, 8 mm Ø*zinc plated*three point support*nickel plated brass screw

Clamping joint high-tensile aluminium. Hinge pin, support plate and stop bar, steel. Version: Clamping joint anodised blue and black. Hinge pins, support plate and stop bar black oxidised. Note: The 5D-swivelling stop serves, among other things, as a versatile instrument for positioning on machining tools or for assembly work. It is infinitely adjustable, quickly and flexibly in 5 axes. Supplied complete with M8x12 T-slot nut and hex key. On request: Connecting element for combining several 5D-swivelling stops.

steel, 8 mm Ø*zinc plated*three point support

Item No.: 612629 Rear parcel shelf cord Specification Rear parcel shelf cord Braided cord with press-fitted spherical cap, injection-moulded support plate and strap with metal clip Model type: C (Customised) Dimensions: Diameter approx. 3.0 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Directly injection-moulded plastic

The MBS hydraulic cylinders of the MZR-1002 series are direct support cylinders for vehicle construction. A robust cylinder connection is made possible by welding blocks. The support plates are ± 15 ° swivel. The cylinder connections have threaded holes for pipe connections according to BSPP ISO 1179-2. Hub and piston rod overhang are variably selectable. Control of the cylinders is possible on both sides via integrated hydraulically operated check valves in plate construction. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

Positioning via servo motor Input of measure and quantity, push button to move carriage Display for actual value / control of measure Clamping of carriage / position control Feeding of the carriage on a steel carrier profile Integrated cable channel – accuracy ± 0,1 mm/m Manual stopper up / down Load bearing capacity 200 Kg/m, with intermediate plates and support Colour RAL 7016

Stopper digital display and roller conveyor Digital display, accuracy +/- 0,1 mm / m Buffer with magnetic band and sensor for exact measures Roller conveyor RD 200/3 or RD 200/4, PVC –roller distance 250mm, Load bearing capacity 200 Kg/m, with intermediate plates and support Available width 290mm oder 407mm Colour RAL 7016 Possible measuring lengths: Measuring lengths 1000 mm, total length 1300 mm Measuring lengths 2000 mm, total length 2300 mm Measuring lengths 3000 mm, total length 3300 mm Measuring lengths 4000 mm, total length 4300 mm Measuring lengths 5000 mm, total length 5300 mm Measuring lengths 6000 mm, total length 6300 mm

Frame structure made of anodized special light metal-profiles. 1 compartment, side walls made of melamine resin laminated panels. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, diam. 125 mm, two of them lockable.

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

PAI material considers the most efficient fusible thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. Its mechanical strength at 205 °C surpasses many engineering plastics at room temperature. BIEGLO offers PAI finished parts of the following types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Each type is best suited for a particular application. Polyamide-imide can be used for a lot of appliations like gears, rollers, plasma chamber hardware and wafer contact fixtures. In addition, PAI material is ideal for high-temperature thermal insulators, burn-in test sockets, valve seats, fasteners, mechanical connections, rollers, labyrinth seals, drive wheels, valve plates, vanes and support gaskets.

We supply cutting boards for most die-cutting machines and semi-automatic machines. According to the customer's wishes, we deliver various dimensions and levels of hardness. We also supply a variety of hardened plates for cutting, which serve as a support surface for knives. Hardened plates are intended for example for platen presses.

Every season is good to use it because it is double-sided, so you bake and cook indifferently from the kitchen side or from the garden side, depending on the weather or how you like it! QUATTROSTAGIONI is a double-sided oven that is recessed into the perimeter wall that divides the kitchen from the veranda or garden and can be used in any season. Use the fronts of the ECO and STEEL built-in models, i.e.: both ECO fronts or an ECO and a STEEL front to best match it with the environments where it is installed. You can load the wood from the outside to avoid getting dirty and cook from the inside. You can prepare the food and bake it from the inside and then take it out and serve it from the outside. Double-sided structure Fixed support, additional refractory plate, bread and pizza peel, additional grills and trays.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs (50 mm center to center) and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

Thanks to the coupling of drinking fountains and cooling unit, several people can be supplied simultaneously. Semirecessed wall design. The installation of the cooling unit inside the wall requires no floor space. All elements manufactured from stainless steel top plates, front panels, internal chassis and cooling unit. Compact A316 stainless steel bubbler with nozzle guard. Antivandalism front push button and regulation of water height through exclusive high precision membrane valve. Deep rounded top plate with antisplash design. Removable lower ventilation panel for maintenance access. Recessed chassis to support the top plate, front panels and cooling unit. Easily regulated cold water temperature (thermostat) Possibility of emptying the cooling unit for greater hygiene. Furthermore the possibility to drink with cups or fill bottles for LV models. The installation of a purification filter is recommended for better water quality.

Ideal for builtin installation in hallways, corridors or smaller spaces. The installation of the cooling unit and water plate behind the wall offers uninterrupted corridor space. All elements manufactured from stainless steel top plate, front panels, internal chassis and cooling unit. Large interior dimensions for comfortable drinking. Compact A316 stainless steel bubbler with water guard. Antivandalism front push button and regulation of water height through exclusive high precision membrane valve. Deep rounded top plate with antisplash design. Removable lower ventilation panel for maintenance access. Recessed chassis to support the top plate, front panels and cooling unit. Easily regulated cold water temperature (thermostat) Possibility of emptying the cooling unit for greater hygiene. Furthermore the possibility to drink with cups or fill bottles for LV models. The installation of a purification filter is recommended for better water quality.

conFORM is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a patented tooth system contour between the lid and bottom. It is ideal for industrial internal mounting that requires special EMC protection. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Accessories such as mounting plates and cable glands are included in the ROLEC product range.

conTROL is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a tooth system contour between the lid and bottom. It is ideal for every type of industrial internal mounting that requires special EMC protection. A lid with an extra-high collar edge and visually appealing bevelling is also available to protect buttons or switches on the front of the enclosure. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Compatible cable glands are also availabe in the ROLEC product range.

aluNORM was developed to protect electrical or electronic components. Due to the large number of standard sizes in four variants, the maximum level of product variety is guaranteed. Typical ROLEC single-channel mounting combines the screw channel for attachment to the wall with the one for closing the enclosure. This provides more space in the interior for your internal mounting. An EMC version is available for the AS and AD variants. This is also available for the AF and AH variants in the dimensions marked. Fastening domes in the lid and bottom enable simple installation of supporting rails, mounting plates, circuit boards and more. Matching cable glands are also available.

polyDOOR is a weather-resistant enclosure made from glass-fibre reinforced polyester. Its special feature is the integrated hinges for opening the lid. This enclosure is also available with a transparent viewing panel. Ideal for all types of electrical and electronic internal mounting. Fastening domes for a wide range of internal mountings are already integrated into the enclosure. polyDOOR is available in a wide range of standard sizes. A large selection of different locking screws, cable glands and other accessories such as cross rails, supporting rails, terminals and mounting plates are also available.

aluFACE is an extremely versatile and flexible command enclosure available in six different versions as die-cast aluminium with a frame made from extruded aluminium profiles. Ideal for all types of industrial operating and display technology. The interior contains pre-installed fastening domes for circuit boards, supporting rails or mounting plates. Matching suspension arm systems can be found in the relevant product category on the ROLEC website.

It does not matter if Ceramant screen plates are manufactured completely new or refurbished - they will convince with quality and performance!

Hanging handle in lengths from 200mm to 1200mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.

Hanging handle in lengths from 200mm to 2000mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.

Hanging handle in lengths from 200mm to 1200mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.