Synthetic optical fibers - Import export

Load cells specially designed to measure the tension force applied to a running cable or running rope. o Custommade design according to your needs type of rope (steel, synthetic, optical fiber, umbilical) capacity rope diameter (from 6 up to 115 mm) maximum winding speed accuracy Material load pin stainless steel other nickelplated steel or stainless steel (option) o Complete range of CE certified electronics and load limitation devices available

Based on proven experience with the realisation of past successful projects MPS has designed and characterised a scalable Theta/Phi fiber positioner for Multi-Object Spectrographs. The positioner has been designed with the purpose of adapting readily to the requirements of any Multi-Object Spectrograph, which requires precise positioning of optical fibers. Whether MOONS, FPS, MEGARA, or DESI, each project has so far developed its own fiber positioner from scratch, with all of the risks and long lead times linked to such a complete new development. The positioner presented here intends to significantly reduce the development time, costs, and eliminate unforeseen risks. The design is easily scalable in size, length, and shape. The positioner size starts at a diameter of 9.5mm and is scalable to fit any customer specific requirements. It is capable of reaching any target within 5 µm with just two correction moves.

We produce in Austria. A single-mode optical fiber with a low water peak (G657A1/G652D) hybrid with advanced characteristics is a fiber with a reduced sensitivity to bends. The fiber is produced by vapor axial deposition method (VAD) with a quartz core alloyed with Germanium. It completely complies with the requirements of ITU­-T G.652d and exceeds ITU­-T G.657A1 parameters of macrobend loss and attenuation. Double acrylic coating provides it´s high strength and long service life. The fiber works in a full spectral range of different access networks, including FTTH, and can be applied in long-distance communications. Fiber-bending resistance and improved attenuation parameters give an advantage in the application for residential networks. The quality control system of the factory confirms plug compatibility with fiber (G652d) as well as with all on the market available SMF fibers.

Diamond has developed an advanced COTS MIL-38999 style connector that demonstrates exceptional performance in demanding optical applications. For the first time, rugged 38999 connectors are available for use with small-core single mode fiber, polarization-maintaining (PM) fiber, and other specialty fiber types. Built around the innovative Diamond Multipurpose (DM) insert, the connector incorporates four (4) termini with Diamond's two-component ferrules, assembled with the company's Active Core Alignment (ACA) process for unparalleled core concentricity. Also available are electrical contacts for hybrid E/O applications. Furthermore, Diamond splice-on termini for repairs can be field terminated with the Diamond ZEUS D50 HE fusion splicer.

Diamond has developed the new rugged, reliable, IP 67, push-pull actuating HE-2000™ harsh environment connector with superior optical and mechanical performance for demanding applications. Built around the innovative Diamond Multipurpose insert, the HE-2000™ connector incorporates four termini using Diamond's two-component ferrules, assembled with the company's Active Core Alignment process for unparalleled fiber core concentricity. Also available are electrical contacts for hybrid E/O applications. The optical and electrical termini are protected from dust and water with the unique automatic protection shutter on the plug connector and a manual shutter on the bulkhead receptacle. The HE-2000™ connector is available for MM, SM (PC/APC) and small-core single mode fiber, polarization-maintaining fiber, and other specialty fiber types. Furthermore, Diamond splice-on termini can be field terminated with the Diamond ZEUS D50 HE fusion splicer, allowing in-service repairs and installations

Diamond offers High Temperature (HT) fiber optic metal assemblies developed specially to withstand operating temperatures beyond the range of conventional plastic connectors over extended periods. The HT assemblies rely upon a combination of specialized assembly techniques and materials, together with special fibers with appropriate coatings suitable for deployment in harsh environments. Diamond HT solutions’ benefits extend to temperature applications up to 150° C (302°F) for use in severe conditions within industrial, military, aerospace, off-shore, telecom, and other environments. These add up on top of traditional advantages such as immunity to electromagnetic interference, better environmental stability and enhanced remote sensing compared to traditional electronic sensors. Diamond HT standard assemblies are available in PC and APC version with standard MM or SM fibers. Other configurations are available upon request.

The special feature of the new DiaFlex fan-out connection is that the fiber whips can be removed and replaced via a connector system in the divider. This provides greater flexibility in the installation of fiber-optic networks. Cable ends can be replaced flexibly, quickly and without spending a great deal of time or money, and cable installations can be extended as is necessary. Thanks to the feed-in cap, which has a small design, preassembled cables can be inserted directly into pipes or cable ducts. There is therefore no need for expensive splices. The cable and the fiber whips are manufactured in the fiber design and quantity that you requested, inspected and delivered with the corresponding test reports. The DiaFlex contains a DIAMOND multi-fiber connector (MFS) for 12 fibers (24 upon request). - Replaceable fiber whips - Protective cap with feed-in eye - Simple to use on site and no expensive splicing work necessary - Robust metal fiber divider

Components that feature a fiber optic cable with fiber optic connectors on both ends. Patch cables are usually based on single mode (SM), polarization maintaining (PM) or multimode (MM) fibers. Find: - Multi-Mode Patch Cables - Single-Mode Patch Cables - Polarization-Maintaining Patch Cables - Multimode Fiber Bundles - High Power Patch Cables - Patchcord with end-cap

Pigtail integrated holder, with Φ2.2×1.0 optical fiber cable (R1 flexible line), LWH of 7×20×4mm, detection distance of 70 ~ 90mm, minimum detection size of Φ1 and wire length of 1M.

M6 threaded universal reflective optical fiber can be used with various fiber amplifiers for detection, with different cable and convex tube length for customization.

Rectangular side-detection fiber optic sensor that supports diffuse reflection

The patch cord is designed to be suspended at the overhead line supports during installation of the trunk line, and to connect subscribers. Description: Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation

M6 threaded coaxial reflective optical fiber, with ∮2.1*1 transmitting terminal and ∮0.25*16 receiving terminal.

Fiberoptic Patch Panels, which are used to terminate the fiber optic cable and to provide access to the individual fibers of the cable for cross connection, are manufactured as 19 ”and they are mounted on device rails. Patch cable manages small and large quantities of fibers with high capacity. The fiber comes securely with cable glands; Allows very little movement. 1U version from 12 ports to 36 ports 2U version from 48 ports up to 72 ports Standard color is 9005 black. In addition, RAL 7035 can be produced in light gray.

Diamond has developed the new rugged, MIL-83526 DM connector featuring the DM (Diamond Multipurpose) insert for superior optical performance. This connector is extremely well suited for harsh environments and other demanding applications. The MIL-83526 DM (Diamond Multipurpose) connector incorporates four (4) termini utilizing Diamond's two-component ferrules, assembled with the company's Active Core Alignment (ACA) process for unparalleled fiber core concentricity. This connector is also available with electrical contacts for hybrid E/O applications. The MIL-83526 DM connector is available for MM, SM (PC/APC) and smallcore single mode fiber, polarization-maintaining (PM) fiber, and other specialty fiber types. Furthermore, Diamond‘s splice-on termini can be field terminated with the Diamond ZEUS D50 HE fusion splicer, allowing for in-service repairs and custom installation.

Based on the known Diamond ZEUS D50 Fusion splicer, which provides fast, easy, and high performance field terminations of Splice-On Connectors (SOC), we have developed a new Kit with the aim of simplifying the field repair or termination of outdoor connectors. The Kit contains everything that is needed to prepare, handle and splice tough outdoor/military and industrial cables with an outer diameter of 3 mm to 8 mm, including a cleaver and an automated stripping machine with heated jaws. Once the cable is fixed on a sliding holder, all three operations can be carried out without additional cable manipulation.

Φ1.0×0.5 optical fiber cable, with LWH of 10.5×6×2.5mm, detection distance of 100 ~ 130mm, minimum detection size of Φ0.5, flexible line and wire length of 1M