Thermoformers - Import export

Thermoformed lid, interworkable with tripbox

225 gr. spin split glass fibre mat as well as 450 gr. emulsion bound glass fibre mat are offered.

Silicone tubes are used for the vacuum channels.

Steel wires are required for the vacuum channels.

Copper pipes are used as heating and cooling coils (very soft and, therefore, easy to bend).

Aluminium perforated sheets are used in order to reinforce the casting resin moulds.

The patented casting resin system ALWA MOULD D consists of two resin components and an aluminium filler. The fast curing of the material allows to produce your own technologically highest quality moulds in just a few hours. As our material is very good castable, compact moulds of any desired volume can be made from our product, such as acrylic baths, boats, etc. (<1 kg – 2500 kg). In comparison to other materials (e.g., glass fibre reinforced plastic), the system is more temperature-resistant, allows castings without air bubbles and does not have to be post-cured. Furthermore, the finished mould is easy machinable (e.g., drilling, milling, grinding, planning, sawing, turning, etc.). ALWA MOULD D moulds can be modified with repair filler, so that a fresh view can be created at an early stage of a new design process and prototypes can be examined at short notice.

ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.

ALWA release spray (art. no. 9515000) is used to release patterns and moulds. After the solvent has evaporated, a strong release film is formed. ALWA release spray may not be polished.

ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.

Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.

ALWA acryl sealer is used to seal porous surfaces, such as wood, gypsum and rigid foams (not suitable for polystyrene foam). The primer dries in the air and forms a strong film. Apply a thin layer of ALWA acryl sealer evenly with a brush. If 3 % hardener powder is added, the curing process can be reduced to approx. 30 min.

ALWA PU foam consists of component A (art. no. 9700005) and component B (art. no. 9701006) and is used, for instance, to produce displacers. The mixing ratio between component A and component B is 1 : 1.2 and the density is approx. 30 kg/m³.

ALWA repair filler (art. no. 5100001) is used in order to repair casting resin moulds. The filler is mixed with 1 – 3 % hardener powder.

The solvent combination contains methyl methacrylate (MMA) and is used for diluting and cleaning.

ALWA EPT 210 is a laminate and backfilling resin. Laminates can be produced with ALWA EPT 210 in order to manufacture glass fibre plastic parts, gauges, templates, moulds and applications with diverse fillers. ALWA EPT 210 is an epoxy resin that has a low viscosity and a light yellow colour. Under exothermic reaction, it cures in connection with the light yellow hardener H 10 at room temperature. The mixture shows a low viscosity and is particularly appropriate for laminating layers of up to 8 mm. For thicker laminates the application of layers must be interrupted several times in order to avoid too high reaction temperatures in the laminate.

ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown, low viscosity hardener (component B) based on isocyanate (Methylendi(phenylisocyanat)e = MDI). Two types are available with different pot life: *ALWA MOULD SLV 3 ~ 3 min. pot life *ALWA MOULD SLV 9 ~ 9 min. pot life

ALWA POR is porous and has a smooth surface structure. The product is characterized by a high stability, pressure-resistance and a long-term heat resistance of over 190°C. It is especially suitable for moulds with fine and complex structures. The good air permeability leads to a uniform stretching of the foil in the process of thermoforming. With this innovative product the annoying drilling of vacuum holes becomes obsolete and thus no visible markings are left on the thermoformed foil. Larger dimensions can be achieved by screw connections. Longer and wider dimensions by gluing. ALWA POR is easily machinable: Sawing, drilling, grinding, polishing. It also remains porous after polishing. ALWA POR is especially suitable for vacuum thermoforming and vacuum forming and is additionally suitable for - aeration of aquaria, fishponds and sewage treatment plants, - venting of injection moulds and blow moulds, - any proceedings of hot steam or water steam processing, - vacuum clamping

ALWA plasticine is used to repair master patterns, round off sharp edges, seal casting boxes and build a parting plane.

Release agent H1 (art. no. 9519000) is used to release patterns and moulds. Release agent H1 is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a release film is formed.

Our drills are suitable for subsequent insertion of vacuum channels.

With our special mixers, mixtures can be homogeneously stirred with less air in a short time.

50 cc Sauce Containers- Raw Material: PP Height: 3 cm Grammage:2.2 g 80 cc Sauce Containers- Raw Material: PP Height : 4cm Grammage:3 g

50 cc Sauce Container - Raw Material: PP Height: 3 cm Weight: 2.2g 80 cc Sauce Container - Raw Material: PP Height: 4 cm Weight: 3 g

High Quality PVC door panels Max Size: 850x 2070 PVC Sheets: 1,3mm Thickness: 24mm to 44mm Glass:Outside Laminated inside frosted Packing: Cartons or Pallets Min.Order.Quantity: 15 piece to 1 container

GC green 1091 MI T6 contains 10% natural fibers and is a biomaterial - allrounder for various thermoforming applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for various trays. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 1591 MI T6 contains 15% natural fibers and is a biomaterial - allrounder for various thermoforming applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for various trays. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.

GC green 3092 MIF contains 30% natural fibers and is a biomaterial - allrounder for various injection molding and also thermoforming applications. With GC green you get a resource-saving and home-compostable material with ground sunflower seed hulls. The fibers from sunflower seed hulls are a by-product of sunflower oil production. They are GMO-free, do not compete with food and do not require additional acreage. Often this material has already been used for labels. In order to provide you with an optimal color selection, we have had 10 masterbatch colors certified by TÜV Austria. We will be happy to advise you. Further advantages of GC green: 100% recyclable Reduced cycle times Certified quality No sink marks Lower energy input In addition to our allrounder compounds, we naturally have many other material formulations. Just contact us, together we will find the perfect compound for your application.