Tower cranes - Import export

Mustanoglu Pi Tower Crane 140 (10 tons) for Tunnel Formwork The maximum lifting capacity of the Crane Pi 140, which is frequently preferred in construction projects in many countries of the world, is 10 tons. The tower crane, which lifts 1450 kilograms of weight at the boom end, has a boom length of 60 meters and a free standing height of 50 meters. Pi Tower Cranes are easily installed and assembled; It provides its users with a comfortable and safe working experience with its powerful automation system, ergonomic stairs and platform design. Mustanoglu, in order to meet all kinds of needs; It offers tower cranes in different models with load lifting capacities ranging from 2 to 24 tons, boom tip lifting values ​​​​between 750 kilograms and 2 tons and heights of up to 80 meters.

Tower cranes, of which Pi Makina is the first domestic manufacturer, are produced with 6 and 7-axis robot welding manufacturing technology. These easy-to-install and easy-to-assemble cranes are indispensable for construction sites by virtue of their load lifting capacities ranging from 2 to 24 tons, their boom tip lifting capabilities between 750 kilograms and 2 tons, and the working radius of up to 80 meters. With its powerful automation system, ergonomic stairs, and platform design, it provides its users with a comfortable and safe working experience. Pi Makina tower cranes, which have become an important brand of the sector in recent years with their 100% domesticity rate and superior features,.

Automatic tower crane AF32 Super 32 meter hand on 32 meter hand, capacity 0,8 t on 13 meter hand, capacity 2,5 t

Tower crane F42-13

Tower crane F60-14

Counterweight system for suction units with a bearing load of over 1000 kg. Secure mounting under protrusions of up to 1.5 m. Can be hitched onto any construction tower or truck crane.

In this case, the innovation lies in that the concrete towers are built from the inside. in the traditional assembly the concrete tower is scaffolded from outside and then refi tted part by part. Not only is this extremely timeconsuming during the assembly, but also the setup of these scaffolds binds precious time resources and tower crane capacities. During the assembly of concrete segments with the Gplatform , the platform is connected inside the fi rst concrete ring by a mobile crane, in compliance with the requirements for passenger transport. If the following concrete tower segment is attached, the crane has already been positioned properly in order to elevate the Gplatform to the next level. After lowering the crane gear, the Gplatform is inserted and pulled to the next tower section. During the upward movement, the assembly operators must not leave the Gplatfom.

I beam (I beam) is a type of metal product used for supporting structures and floors of automobile and railway bridges, tower, bridge and gantry cranes, crane girders, supports and other supporting structures. The main task of the beam is to carry the strength force to all types of permissible loads. Of all the presented type of metal products, it is the most durable. Depending on the bearing load, the selection of the beam is made. Do not overload the metal structure with the permissible size of the beam, as it may become unjustifiably expensive and difficult to transport. There are certain formulas and criteria for the selection of the required brand and size of the beam. If necessary, our qualified specialists will help you as much as possible to select the required sizes of metal products. The length of the I beam, as a rule, is 12 meters or more, and the width of the flange is from 10 to 50 cm. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

Remote control for loading and tower cranes: LK4, LK6, LK8

Replacement batterypack for Autec MBM06MH / R0BATT00E0014. Remote control for loading and tower crane

Original battery Autec LPM02. Remote control for loading and tower cranes.Only available within Europe (Li-ion battery)

Original battery Autec MH0707L. Remote control for loading and tower cranes.

Original battery Autec MBM06MH. Remote control battery for loading and tower cranes Modular MK, plus MK.

RINC-07 7.2v/ 700mAh NiMH replacement remote control battery Elca for loading and tower cranes GENIO-P / GENIO-M

Replacement batterypack for Autec MH0707L. Remote control for loading and tower crane

Battery compatible with Hiab Hi Drive 4000 / Combi drive 5000 / 2055112 / Olsberg. Remote control for loading and tower cranes.

Original battery Elca PINC-07MH. Remote control for loading and tower cranes: GENIO-P / GENIO-M

Battery compatible with Hetronic 68303010 / 68303000 / FBH1200 / 6830303001 / 70745. Remote control for loading and tower cranes Hetronic GA / GL / TG / GR-W.

Details Remote control battery compatible with ABB/HBC 6V/730mAh NiCD. Remote control for loading and tower cranes Radiomatic Micron 4 / Orbit.

Remote control battery compatible with danfoss / Ikusi 7,2V/1000mAh NiMH. Remote control battery for loading and tower cranes TM60 / TM61-TM62 / 2303691.

Remote control battery compatible with Hiab/Olsbergs 7,2V/2000mAh NiMH. Remote control battery for loading and tower cranes Hiab XS Drive H3786692 / H3796692 / AX-HI6692 / AMH0627.

Battery compatible with Scanreco RC400 / 590 / 592 / 960 / HMF / Fassi / Palfinger EEA2512 / Effer / RC400 / FBS590 / 16131 / Marrel 500 / Cifa. Remote control for loading and tower cranes.

Original Danfoss / Ikusi remote control battery. Remote control for loading and tower cranes TM70: T70/1 / T70/2 / RAD-TS / RAD-TF / 2303692.

Remote control battery compatible with ABB/HBC 3,6V/2100mAh NiMH. Remote control battery for loading and tower cranes Micron 5 with iLOG / Linus 4.

Battery compatible with Scanreco RC400 / 590 / 592 / 960 / HMF / Fassi / Palfinger EEA2512 / Effer / RC400 / FBS590 / 16131 / Marrel 500 / Cifa. Remote control for loading and tower cranes.