Tubes and pipes- rubber - Import export

The fluid is used to prevent condensation with the effect of external conditions and to minimize heat losses. During the application, the inner surface of the insulation and the installation pipe should be in full contact with each other and no space should be allowed between them. It is caused by the deformation of the insulation during the application, a complete insulation should be made from the bridge. It is necessary to coat immediately. With a wide range of production, Pa-Flex pipe insulations of 6/9/13/19/25/32 mm wall thickness are produced in a diameter range of 6mm-114mm. Operating temperature is between -40 / + 120 ° C. Has as a density of 50-60 kg / m³.

Thermal conductivity coefficient (X) EN 12665 -W/m.K = 0,032 (-20°C) -W/m.K = 0,034 (0°C) -W/m.K = 0,036 (20°C) -W/m.K = 0,038 (40°C) -W/m.K = 0,040 (+60°C) Water vapor diffusion resistance EN 12086 = µ ≥ 7.000 Classification of reaction to fire EN 13501-1 = B - s2 - d0 Heat resistance EN 14706 = max. +110 Soluble chloride ion level EN 13468 = 500 pH EN 13468 = 6--8 Flexibility = Perfect Closed cells' percentage = > 90 Resistance to chemicals (oils, mineral oils) = Good Mold and odor formations = No

Planetary saws, equipped with disk and milling cutter for cut and chamfering of PVC pipes (rigid and foam) or other plastic materials; Swift replacement of tools, even with pipe in movement; Pipe blocking vices or iris mechanism jaw system. Suction device with double filter and sound-proofing; Automatic synchronisation with extrusion speed.

Automatic threading machines for in-line and stand-off operation, suitable for PVC electrical, gas and water pipes(produced in single or double extrusion). Outside and inside threading (through removal of material) simultaneously on both ends. Independent motorization of the two threading groups by spindle motors. Adjustable threading length. Adjustable thread depth. All sizes adjustment can be done on touchscreen panel. By the iris mechanism Clamping of the pipes during the threading phase. High output and thread sensitivy. Simple utilization, efficiency, minimal maintenance. Optional Servo Threading System. Pipe feeding and Pipe Stocking Table. Clean working area with hermetic design.

Independently driven caterpillars using Asynchronous and Servo motors. They allow a constant pulling power. Furthermore, they reduce energy waste and the number of moving parts subject to maintenance. Long caterpillar contact length assures a good grip on the pipe and provides considerable pulling power. Caterpillars bow profile. The shape reduces stretching and wear of the caterpillars, thus prolonging the life of the machine. Motorized positioning of lower caterpillars that can be adjusted according to the diameter. Chain conveyors with neutral rubber pads on chains that do no mark the pipe. High torque can be obtained at low line speeds in servo motor haul off.

PPR Pipe – PN 16

Due to the high strength , reinforced ,self-adhesive feature it saves time and labor. Due to its adhesive feature, it contrebutes to sealing and reduces the workmanship errors. Reduces the scrap rate to 2-3%. The most suitable size for duct insulation ; 100cm and 120cm width sheet, and production in 7 different thickness intervals. Due to its elastic structure, help relieve vibration appearing in the ducts. Operating temperature is between -40 / + 120 ° C. Has as a density of 50-65 kg /m³. Since thermal conductivity coefficient of the elastomeric material is low it reduces the heat transfer significantly (λ ≤ 0.034 W / mK).

....

Extruder machine is used for melting, mixing plastic material. Masfen produces specific screw and barrel for material type, that provides perfect mixing and homogeneous. Our Extruders has 50kg/h to 1000kg/h capacity for PE,PEX,PP,PPRC type plastics.

Piping includes a pipe or system of pipes, pipe spools, tubing, fittings, expansion joints, hoses, or other pressure bearing components as appropriate. Pressure piping systems transport fluids under pressure. Components of pressure piping include: a. Pipes: The main conduits for fluid transport. b. Fittings: Connectors, elbows, and tees that join pipes together. c. Valves: Used to control and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids

GRE and GRP pipes have advantages such as lightness, corrosion resistance, high pressure strength, and they are manufactured as pre-insulated under the brand of Yalcın Boru. GRE (Glass Reinforced Epoxy) Pipe GRE pipe is resistant to the abrasive effects of caustic substances and acid concentrations due to its chemical composition. For this reason, it is used in fire, drinking water and cooling water transmission lines, power plants and industrial waste water systems. GRP (Glass Reinforced Polyester) Pipe GRP pipe is a type of pipe that does not corrode, has insulating feature and can operate in a wide range of pH. Drinking water and clean water transmission lines, piping lines of chemical plants and circulation lines of power plants are among the prominent areas of use of these pipes.

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc.

A pipe made of new generation raw material PPR-CT which gives unique properties %35 better flow rate

Welded Steel Tubes and Pipes Welded tubes for pressure purposes EN 10217-1 unalloyed tubes, room temperature Facts and Figures Diameter (OD)21,3 mm – 88,9 mm (hot stretch-reduced) 21,3 mm – 323,9 mm (cold formed) Wall thickness (WT)2,0 mm – 12,7 mm MaterialP195 TR1/TR2 P235 TR1/TR2 P265 TR1/TR2 VersionsBlack, galvanised, grooved, varnished, sheathed in PE, threaded, with sleeves Device pressure standardsAD-2000 W0 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

SEAMLESS HOT ROLLED STEEL TUBES Seamless tubes for pressure purposes EN 10216-1 Unalloyed tubes, room temperature Seamless steel tubes of this standard have extraordinary pressure resistance at room temperature. Due to the production process, a great deal can be offered with regard to purpose optimized steel qualities. Upon request, an additional inspection can be carried out for a fee by an expert appointed by the customer. Facts and Figures Diameter (OD)21,3 mm – 610,0 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialPP195 TR1/TR2 P235 TR1/TR2 P265 TR2 Treatment condition+N Device pressure standardsAD-2000 W0 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Bright steel EN 10278 The surface is significantly improved due to at least one additional work step – the primary material is beeing drawn, pickled or grinded for this purpose. The bending behaviour can be significantly improved due to additional heat treatment. Facts and Figures Diameter (OD)19,0 mm – 120,0 mm MaterialS235JRC S355J2 C15, C30, C45 other materials upon request Treatment condition+C, +SH, +SL (h7) +QT, annealed TestsUS testing (extra charged) ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

BOILER TUBES •EN 10216-2 •EN 10216-3 •EN 10217-2 •EN 10217-3 Seamless tubes for pressure purposes EN 10216-2 •unalloyed and alloyed tubes, increased temperature Seamless boiler tubes of this standard have extraordinary temperature and pressure resistance. Due to the production process, a great deal can be offered with regard to purpose-optimized steel qualities. Facts and Figures Diameter (OD)21,0 mm – 610 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialP195 GH P235 GH, P265 GH, 16Mo3 13CrMo4-5, 25CrMo4 10CrMo9-10 Treatment condition+N TestsTC1 (not including US testing) TC2 (including US testing) VersionsBlack, painted Device pressure standardsAD-2000 W0, AD 2000 W4, PED ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

CYLINDER TUBES (HPS & HPZ) •EN 10305-1 (HP) •EN 10305-2 (HPZ) •EN 10305-2 (HPS H9) Seamless, cold-drawn HP precision steel tubes EN 10305-1 Seamless, cold-drawn HPZ tubes have the best dimensional tolerances, plus excellent straightness and roundness. These tubes are thus excellently suited to peeling or honing. A recommended ultrasonic test can also be carried out for a surcharge Facts and Figures Diameter (OD)50,0 mm – 125,0 mm Wall thickness (WT)5,0 mm – 7,5 mm MaterialE355 Treatment condition+SR TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Reach us out for further information; +905422557055 info@feraplas.com www.feraplas.com

VISHAL STEEL INDIA is a leading worldwide supplier & exporter of Stainless Steel ASTM A312 / A213 / A249 316/316L Stainless Steel Seamless Pipes , Stainless Steel ASTM A312 / A213 / A249 316/316L Stainless Steel Welded Pipes , Stainless Steel ASTM A312 / A213 / A249 316/316L Seamless Pipes etc.

VISHAL STEEL INDIA is a leading worldwide supplier & exporter of Stainless Steel ASTM A312 / A213 / A249 304/304L Stainless Steel Seamless Pipes, Stainless Steel ASTM A312 / A213 / A249 304/304L Stainless Steel Welded Pipes, Stainless Steel ASTM A312 / A213 / A249 304/304L Seamless Pipes etc