Epoxy adhesives - Import export

Rotafix Zeroset Anchor Grout is a 2-part high strength epoxy system that is used for the fixing of metallic objects into concrete such as anchors and studs. Rotafix Zeroset Anchor Grout has been specifically designed for setting at low temperatures in smooth-walled, diamond drilled holes. This chemical anchor will displace water from a hole then cure under any residual water. This high-performance chemical anchor grout has been approved by the Department of Transport for parapets and street lighting. Additional Information: Compressive Strength: 70N/mm2 Tensile Strength: 16N/mm2 Flex Strength: 32N/mm2 Workable for 20 minutes at 20°C Available Sizes: 500cc (Product code: 3542)

Rotafix Engineering Adhesive is a high strength structural epoxy adhesive, part of the Resiwood product range. The 2-part unfilled epoxy adhesive has a degree of flex which makes it well suited to wood engineering and timber applications. The slow setting nature of Rotafix Engineering Adhesive lends itself to working on site where time is needed to create and move joints prior to finalising the assembly. Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 40N/mm2 Tensile Modulus: 3GPa Flex Strength: 70N/mm2 Bond Strength: 6N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C Supplied with: Cartridge set Nozzle Follower plate Available Sizes: 400cc (Product code: 3560)

Rotafix Structural Adhesive (RSA) is a high performance unfilled thixotropic slow setting structural epoxy adhesive which is used in timber engineering. The slow setting nature of the epoxy adhesive allows the manipulation of timber joints for a period of time. This is particularly useful for flooring boards, roofing sheets or complex joints. RSA is used extensively for: Bonding rods and plates into timber engineering repairs, such as Timber Resin Splice Upgrading timber strength using bonded in flitch plates GluLam delamination repairs using rods Construction in wood Structural joint glue Moment resisting joints Stressed skin floors Additional Information: Compressive Strength: >60N/mm2 Tensile Strength: 38N/mm2 Tensile Modulus: 2GPa Flex Strength: 70N/mm2 Bond Strength: 6-10N/mm2 Specific Gravity: 1.1 Workable for 6 hours at 20°C

DELO-KATIOBOND UV curing (320-400nm) and light activated (400-550nm) epoxy adhesives are one part solvent free epoxies suitable for bonding, sealing and potting applications. DELO-KATIOBOND light activated adhesives can be used in opaque applications, as once the adhesive has been initiated via visible light, curing starts due to the decomposition of the photo-initiator and continues to completion. The curing is by cationic polymerisation, hence the product name Katiobond. Information on UV Curing Lamps can be found here. The range has good temperature resistance, up to 180 degrees C and excellent chemical resistance, making them ideal for automotive and harsh environment use. The epoxies are dry to touch after cure (no oxygen inhibition occurs). Cured products exhibit low shrinkage, resulting in low stress on delicate devices. Low water absorption and very low ionic content make them ideal for electronic applications. ** Click for more **

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications. Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula. A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities. ** Click for more **

Hexcel manufactures a wide range of film adhesives, foaming films, primers and liquid shims for metal-to-metal and composite bonding. Redux® and HexBond™ Film Adhesives, Foaming Films, Primers and Liquid Shims Hexcel formulates and manufactures a comprehensive range of structural film adhesives, foaming adhesive films, paste adhesives, liquid shims and primers for aerospace and industrial markets. Redux® and HexBond™ Film Adhesives Epoxy and bismaleimide (BMI) adhesives are supplied in film form on a roll and require heat and pressure to cure. These high performance structural adhesives are ideal for metal to metal and composite bonding and for the manufacture of honeycomb sandwich structures. ** Click for more **