Bolts - Import export

Blank connector to be machined to suit specific drawtube threads Other lengths of connector are available We can supply drawnuts with the correct thread to suit your machineUsed for mounting a B200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

Blank connector to be machined to suit specific drawtube threads Other lengths of connector are available We can supply drawnuts with the correct thread to suit your machine Used for mounting a BB200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

Blank connector to be machined to suit specific drawtube threads Other lengths of connector are available We can supply drawnuts with the correct thread to suit your machine Used for mounting a BT series chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

Threaded Hole allows for Back Stop to be fitted Tight fit by use of an o-ring Chuck bungs are primarily used to block the centre of the chuck to stop swarf and coolant going down the spindle. The threaded hole which can be used for the removal of the bung can also be used for mounting a back stop.

Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Aluminium serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 6061 Aluminium. Good Quality of of material allows for machining with a good finish.

Set of 3 T-Nuts for mounting Jaws onto Base Jaws Includes set of Bolts to Suit Custom T-Nuts are available T-nuts used for the mounting of jaws onto the base jaws on a power chuck. These are supplied with the bolts required. Keeping spare t-nuts can result in reducing set-up times.

Set of 3 T-Nuts for mounting Jaws onto Base Jaws Includes set of Bolts to Suit Custom T-Nuts are available T-nuts used for the mounting of jaws onto the base jaws on a power chuck. These are supplied with the bolts required. Keeping spare t-nuts can result in reducing set-up times.

Set of 3 T-Nuts for mounting Jaws onto Base Jaws Includes set of Bolts to Suit Custom T-Nuts are available T-nuts used for the mounting of jaws onto the base jaws on a power chuck. These are supplied with the bolts required. Keeping spare t-nuts can result in reducing set-up times.

Blank connector to be machined to suit specific drawtube threads Other lengths of connector are available We can supply drawnuts with the correct thread to suit your machine Used for mounting a B series chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

Low Profile for More Tool Clearance Cam-Profile allows for Part Size Variation Haredened for Longevitiy Low profile eccentric clamp has a long stroke allows for part size variation. Relatively high clamp force for size of the unit, low profile allows for holding smaller components and giving better tool clearance.

Metric threaded nuts with integral flanges. Heat treated to HRC 30-35 Black Oxide surface finish Metric threaded nuts with integral flanges. These nuts are manufactured from S45C(JIS) / CK45(DIN) heat treated to HRC 30-35 and have a black oxide surface finish.

Extend the length of clamping studs Heat treated to HRC 30-35 Black Oxide surface finish Extends the length of clamping studs. These nuts are manufactured from S45C(JIS) / CK45(DIN) heat treated to HRC 30-35 and have a black oxide surface finish.

Ideal for Tombstone, Grid Plate and Fixture Plate applications Accurate location and repeatability High holding forces Stainless or machinable steel versions DESCRIPTION Modular XYZ Xpansion™ Pins for Tombstone, Grid Plate and Fixture Plate applications. The unique, patent pending design provides accurate location, repeatability and high holding forces for securing parts on the inside diameter. These pins are available in press fit or thread fit versions. Both styles of the pins are manufactured from “heat treatable” 17-4PH stainless steel and the Press Fit Pins are also available in 12L14 mild steel so that users can easily machine them to no-standard diameters if required. The top of the Pins have a slight taper creating maximum line contact in bore and providing clearance during load/unload. Designed for quick set-ups on secondary operations, material coming off prep stations, water-jets or even applications outside of your machining centers.

Reduce your set-up times by more than 90%. Self-clamping mechanism, constant air not required Made from aluminium or stainless steel Thermal compensation included DESCRIPTION Created for use on CNC machining centres, the V-Tech Zero Point system’s unique design guarantees the secure and precise clamping of workpieces, even under tough conditions. The pneumatic, quick change and ZERO POINT clamp features compact dimensions, extraordinarily high clamping force and is made from top quality materials. These stainless steel pull studs can be fitted to fixtures, workholding and even directly to workpieces for easy mounting to the V-Tech zero point baseplates. Pull studs are available as a fixed position type for precise location as well as types with either one or two axes of thermal compensation. Plastic pull studs are available for use as blanking plugs for receivers when not in use.

Quick change jaws for fast setups Hardened and precision ground for wear resistance and accuracy Ideal for demanding clamping conditions and high clamping forces Adapts the OneLok to accept older bolt-on soft jaws Jaw spacers for OneLok that fit 5OL1540 and 5OL1550 and well as the previous generation of OneLok. These jaws are hardened and precision ground for strength and accuracy. The BoltFast mechanism means they can be changed in seconds. The holes in these jaws allow the re-use of standard bolt-on jaws.

Can be used for 1st Operation only Deadlength Actuation Eleminates part movement when Clamping Case hardened, optimising the rigidity, strength and durability. Varibore Collets have a large range allowing for easy holding of Rough Bar Klamp CRS54 collet chucks are suitable for collets which have a large gripping range. Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation. Workpiece remains in a fixed position during actuation, allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet and gripping the workpiece

UK manufactured drawtube to suit open centre systems and drawbars to suit closed centre systems custom made to suit the machine specifications and application. 7-10 working days for standard stock sizes 14-21 working days for non-standard material sizes Please complete the Drawtube Data Sheet with this enquiry for a quotation.

Blank connector to be machined to suit specific drawtube threads Other lengths of connector are available We can supply drawnuts with the correct thread to suit your machine Used for mounting a BT200 chuck onto a drawtube, this connector is supplied blank to be machined out to the required thread. **Some machine setups may require the use of extended connectors as well as a drawnut**

Can be used for 1st Operation only Deadlength Actuation Eleminates part movement when Clamping Case hardened, optimising the rigidity, strength and durability. Varibore Collets have a large range allowing for easy holding of Rough Bar Klamp CRS60 collet chucks are suitable for collets which have a large gripping range. Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation. Workpiece remains in a fixed position during actuation, allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet and gripping the workpiece