BICKER ELEKTRONIK GMBH - We are your partner and solution provider for industrial and medical applications

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

✓ Outdoor AC/DC UPS for extreme environments in robust aluminium housing with IP65 protection ✓ Already integrated LiFePO4 energy storage (330 Wh) ✓ Temperature range -20…+50 °C ✓ Intelligent input current regulation ✓ Regulated output voltage in battery mode ✓ Pressure compensation element to prevent condensation inside ✓ Input and output cable firmly installed ✓ IEC/EN 62040-1 certified ✓ Optionally available: mounting sets for masts AC-DC UPS with IP65 protection class for outdoor applications The UPSI-2406IP-38AC is an AC/DC UPS system with numerous digital features and a high performance. The UPSI-2406 is used with an upstream AC/DC converter and combined with an already integrated LiFePO4 energy storage. The primary use of the UPS is in bridging power failures and/or fluctuations. The application to be protected is connected to the output of the UPS. The device has IP65 protection and was specially designed for use under extreme conditions.

✓ Uninterruptible power supply (DC UPS) with integrated Li-Ion Battery ✓ Intelligent power sharing ✓ Regulated output voltage in backup mode ✓ Minimum load detection ✓ Power fail Timer-Function ✓ Relay dry contact on power fail ✓ USB & RS232 Interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPScom management software ✓ Shutdown & Reboot Function ✓ Fuel gauge ✓ Approved to IEC/UL/CSA 61010-1 / -2-201 ✓ 3 years warranty The DC UPS UPSI-2406DP1 with included energy storage has been designed for DIN Rail applications. The robust housing protects electronic parts against coarse pollution. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function, which activates the auto-restart of the computer system, as soon as the input voltage returns during shutdown or later.

✓ Powerful 24 V DC USV (DIN rail version) ✓ Integrated Supercap Pack 13,5kJ ✓ Up to 500 000 cycles ✓ Intelligent input current detection ✓ Regulated output voltage in battery mode ✓ Minimum load detection ✓ Power-fail timer function ✓ Relay dry contact on power fail ✓ Reboot function ✓ Fuel gauge ✓ Shutdown via external signal ✓ Operating temperature range -20°…+70°C ✓ Extended functionality by UPScom management software ✓ 3 years warranty The compact DC UPS modules UPSI-2412DP2 in a robust DIN rail housing are ideally suited for long-term use in control cabinet applications and decentralized solutions for protecting embedded industrial PCs, controls, motor drives, sensors, measurement devices, safety technology and many more. The UPS comes with USB & RS232 interface and provides a capacity of 13.5kJ in up to 500,000 cycles. Extended functionality is available via the UPSGen2 configuration software.

✓ Outdoor DC-UPS for extreme environments ✓ Protection class IP65 / IP67 ✓ Capacity 33Wh ✓ Robust aluminium enclosure ✓ Operating temperature range -20...+50°C ✓ Longlife LiFePO4 Battery ✓ Offers up to 6000 cycles ✓ USB interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPS.com configuration software ✓ Shock tested to EN 60068-2-27 ✓ Vibration tested to EN 60068-2-6 ✓ Preassembled mounting bracket ✓ Pressure compensation element ✓ Cable set included ✓ 3 years warranty The ruggedized DC UPS series UPSI-IP has been designed for outdoor and industrial use for extreme environments. The robust housing protects electronic parts according to protection classes IP65 and IP67 against jet water and temporary submersion as well as against dust and dirt. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function.

✓ Outdoor DC-UPS for extreme environments ✓ Protection class IP65 / IP67 ✓ Capacity 99Wh ✓ Wide input voltage range 8…36V ✓ Robust aluminium enclosure ✓ Operating temperature range -20...+55°C ✓ Longlife LiFePo4 Battery ✓ Offers up to 6000 cycles ✓ USB interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPScom configuration software ✓ Robust construction against shock and vibration ✓ Preassembled mounting bracket ✓ Pressure compensation element ✓ Cable set included ✓ 3 years warranty The ruggedized DC UPS series UPSI-IP has been designed for outdoor and industrial use for extreme environments. The robust housing protects electronic parts according to protection classes IP65 and IP67 against jet water and temporary submersion as well as against dust and dirt. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions.