Italy
Agent/ Representative
Italy
1. block magazine 2. hydraulic block tilter 3. pneumatic alignment 4. transport belt conveyor 5. sheet cutting station with automatic wire setting 6. bottom scrap collection 7. vertical cutting station with automatic wire setting 8. powered roller bed adjustable in width 9. down cutting station with automatic wire setting 10. powered roller bed 11. de-stacking unit 12. transfer roller bed 13. pre-crusher for scraps
Request for a quoteItaly
Innovative digital process — DPI DG Printing — especially suitable for the decoration of EPS boxes. Thanks to a special new ink with superior saturation properties, which is bright, water-repellent and non-toxic, EPS surfaces can be printed directly, at great speed and with truly remarkable results!
Request for a quoteItaly
FUTURA EUROPE offers a range of polyurethanes and polyureas, dedicated to spray application, specially designed to resolve the major problems in construction, such as: waterproofing of roofs, ceilings, terraces, earth retaining walls, bridges, overpasses, roads, tanks and pipelines (also for drinkable water), pools, asbestos encapsulation, block and prevent water infiltration, thermal and acoustic insulation.
Request for a quoteItaly
Compactor suitable for reclaiming expanded polystyrene packaging. Packaging is reduced to blocks which can easily be placed on pallets for inexpensive transport, storage and recycling. The compactor accepts large materials such as the packaging used by television manufacturers, food containers, etc. Packaging manually fed by the operator is crushed by breakers and then transported by a screw into the compacting chamber. The compacted polystyrene is ejected through a tube at the side.
Request for a quoteItaly
Our machines produce insulated and high resistant EPS panels for the building market.
Request for a quoteAgent/ Representative
via Ugo Costella, 2
31010 Godega Di Sant'urbano - Italy
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteFrance
TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.
Request for a quoteFrance
TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.
Request for a quoteSouth Korea
Hydrophilic coating solutions for medical devices Coating solution for intervention medical device. Among many types, this model has excellent performance on guide or TPU-based medical devices. HA(hyaluronic acid) based two-coated model DP system + top coat 3.4 combination. It is a thermosetting method and has excellent durability, smoothness, and biocompatibility. Used for surface coatings of interventional medical devices such as guide wires, catheters, and balloons, this sample DP system is an optimized model for TPU-based catheters or guide wires.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.