DELTAFLUID - Measuring up to your expectations

France

Factory icon Manufacturer/ Producer

DELTAFLUID
Web icon
47 Products

France

Verified by Europages

Orifice plates or diaphragms are the most commonly used primary elements for differential pressure flow measurement. They allow measurement over a wide range of flow rates and for a wide range of pipe diameters. There are several types: the sharp-edge orifice plate, the best known, the other concentric plates with conical inlet and quarter circle plate for the measurement of low flows or viscous fluids and the eccentric plate or segmental plate for the measuring dirty or impure fluids. Finally, the multi-hole / conditioning orifice plate allows a measure of quality while providing a minimum footprint. Inserted within a circular pipe, they create an obstacle, increase the speed of the fluid and generate a pressure difference between upstream and downstream of the restriction. This differential pressure measurement is proprotional to the flow rate value.

Request for a quote

France

Verified by Europages

Mounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Recommended for low flow rates and / or viscous fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Recommended for viscous fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Recommended orifice plate for dirty, charged or two-phase fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Recommended for dirty, charged or diphasic fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Economical solution thanks to the reduction of upstream and downstream straight lengthsStandard: Element designed on the basis of ISO 5167-1 & ISO 5167-2 or ASME FC-3M. Mounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application

Request for a quote

France

Verified by Europages

The nozzle has a radiated input and is therefore suitable for fluids flowing at high speed. Unlike an orifice plate whose edge could be damaged, the ISA 1932 nozzle and the long radius nozzle according to the names of the standard are quite suitable for these applications. For corrosive or aggressive fluids, the surface in contact with the fluid can be covered with a special coating to improve their lifetime.

Request for a quote

France

Verified by Europages

Suitable for large flows with high speedsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. or solder connection Material: Standard: carbon steel, stainless steel, others according to your application.

Request for a quote

France

Verified by Europages

Suitable for large steam flowsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation or solder connection (BW) Material: Standard: carbon steel, stainless steel, others according to your application.

Request for a quote

Domain icon Manufacturer/ Producer

DELTAFLUID

Chemin les AUGAS

Rd 817

64170 Lacq - France

VAT No.
Contact