PLANT OF TECHNOLOGICAL EQUIPMENT, LLC

The dissolver is hydraulic, single-column, floor-mounted. We can offer such a machine with the power of the main engine (cutter) - from 7.5; up to 75.0 kW., 380 V. for replaceable vessels of 100 to 1500 liters. Electrical equipment can be made in a general industrial or explosion-proof design. The dissolver is equipped with a hydraulic drive for lifting the traverse, on which the shaft with the tool and the lid are mounted. All parts that are in contact with the product are made of food or technical stainless steel (customer's choice). Turnovers are regulated from 50 to 1500 rpm. (possibly from 50 to 3000 rpm) using a frequency converter. For more viscous products, it is possible to manufacture a dissolver with two or three working shafts, one of which will have a milling cutter, and the other will have a low-speed stirrer, for example, an anchor type with cleaning elements, and on the third - a high-speed stirrer.

Dissolver, compact, with one or two shafts, for premises with a low ceiling. It is supplied with an electromechanical lifting of the tool. It is intended for vessels with a volume – from 30 to 500 liters. An electric motor’s power – from 2.2 kW to 11kW, the turnovers – from 100 to 1500 (3000) rpm, 380V. It is carried out in both, Ex and IP design. A milling cutter can be installed on one shaft and a stirrer of the required type can be installed on another shaft.It is possible to produce a dissolver, providing vacuum in the working area.

Stationary dissolvers, volume from 50 to 5000 liters. The power of the main electric motor is from 1.2 up to 150 kW. The rotational speed is adjustable from 100 to 1500 rpm. or from 100 to 3000 rpm., on legs or overpass, with weight equipment,etc. Can be equipped with various tools.

Vacuum dissolver with one, two or three shafts. It is intended for vessels with a volume – from 50 to 1200 liters. It is manufactured on the basis of the above mentioned dispersers: near wall (floor) dissolver, compact dissolver or dissolver with hydraulic lifting of the tool. Power of the main engine – from 3.0 to 55 kW, speed of main working shaft – from 100 to 1500 (3000) rpm. It is carried out in both, Ex and IP version, with one main working shaft (milling cutter), with two working shafts (milling cutter and slow-moving anchor agitator with elements cleaning walls of a vessel) or with three working shafts (a milling cutter, a slow-moving stirrer and a fast moving stirrer of butterfly type).

Horizontal bead mill with a working chamber volume of 20 or 50 liters. Engine power - 22 or 45 kW. Vertical bead mill, with a working chamber volume of 3, 10, 20, 50, 75 and 100 liters. Engine power - from 4 to 55 kW. Submersible bead mill (basket mill) with a working chamber volume of 10 or 20 liters. Designed for vessels up to 250 and up to 500 liters. Electrical equipment is performed in general industrial or explosion proof versions.

The homogenizer is used in food, cosmetic, pharmaceutical, chemical and other industries, for the production of ketchup, mayonnaise, creams, gels, pastes, ointments, household chemicals, varnish-and-paint products, pharmaceutical substances and other emulsions and suspensions, which do not divide into layers, also for emulsions of high dispersing.The installa-tion is made in the form of a vertically located reactor with a volume from 100 to 1000 liters with a conical bottom. The reactor is equipped with a heat exchange water jacket with a block of electric heating elements, as well as a frame stirrer or blade type mixer, with a speed of 56 rpm. The homogenizer is equipped with a homogenizer pump and a loading device for dry products. The heat exchanger jacket can also be used to cool the finished mixture. It is possible to supplement an installation with a fat's melting down barrel and with a dispersing device. It is possible to ensure the vacuumization of the product in the reactor.

The instalation for squeezing of pasty and viscous products from vessels with volume of 500 or 1000 liters into the dispenser. Lifting of a carriage with a vessel and squeezing of the product out of the vessel is done with a hydraulic cylinder.

We manufacture pump - filter stations of different capacities, with different degree of cleaning and equipment. Execution: general industrial or explosion-proof, under replaceable filter elements. They can be completed with gear, centrifugal and diaphragm (membrane), screw or plunger pumps, pulsation dampers, frequency converters, flexible or rigid pipelines, stop valves and various replaceable cartridges. The price directly depends on the technical characteristics of the pump and productivity of the installation you need. The pump is completed with a removable filter with patency, needed to the Customer.

We produce capacitive equipment of various purposes and designs, including stainless steels, and with weighting equipment, with a volume – from 1 to 50000 Equipment is provided with a frequency converter or fixed speed mixer, with a heating or cooling jacket, with the installation of electrical heating with temperature sensors and thermostat or according to your heating medium, cooler, vertically or horizontally standing, on the supports or on brackets for the overpass, with or without weighing equipment, with the number of hatches you need for maintenance and nozzles for supply and withdrawal of the product, with or without weight equipment. It is possible to complete with the cleaning heads and the flyover for maintenance.

The laboratory dissolver is used for vessels with a volume – from 1 to 20 liters. Engine power - from 0, 37 to 3 kW, with turnovers – from 100 to 1500 (6000) rpm. with a mechanical lifting tool – a milling cutter or a stirrer. Execution: Ex or IP, 380 V, IP - 220V. The laboratory bead mill of a batch action, with three mobile cups with a volume – from 0,5 to 1,2 liters, with cooling jackets. An engine power – from 0, 55 to 1, 5 kW and frequency of rotation – 1500rpm. Execution: Ex or IP, 380V, IP - 220V. The laboratory set of combined type "two into one" – a dissolver and a bead mill, with mobile tool, with a total volume – 1.2 liters. An engine power – 1, 5 kW. Adjustable turnovers – from 100 to 1500(6000) rpm. It is possible to be equipped with a more powerful engine – 2.2kW. Execution: Ex or IP, 380 V and IP – 220 V.