Steel Belt Connectors

mechanical belt connectors for use with most PVC, rubber and steel elevator belts, e.g. Supergrip belt connectors Easy to install system with 50 mm segment widths Four versions for up to 1,250 kN/m without limiting belt strength Max. temperature 80ºC, lock nut with nylon insert (standard) Type BC belt connector for steel mesh belts Four versions for up to 2,500 kN/m belt tensile force Maximum stability using high load bolts with self locking nuts Top quality construction in steel and extruded aluminium

Super Screw connectors are available in different versions of textile reinforced rubber abrasion resistant, heat resistant, oil and grease resistant, white FDA, self extinguishing, with textile on the running surface or in stainless steel. Screws are available in either galvanised or stainless steel. Super Screw connectors are inserted in the belt diagonally and from both sides. After the rubber layer is removed, the connector is installed using just a cordless screwdriver or, in underground mining, using a breast drill or pneumatic screwdriver. Super Screw® connectors are pre installed, depending on the belt width, in lengths up to 3,000 mm or in rolls up to 25,000 mm long. A variety of screws is also available for the initial installation of the connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 or PZ 3 cross head bits and a magnetic bit holder.

FTK Förderband Technik Kilian GmbH has a wide range of elevator belts for all applications. The range includes the following belt types anti static, abrasion resistant, high temperature, oil resistant and flame retardant, and steel mesh belts for the harshest environments. The belts are made to customer requirements.

Conveyor belts are often used to transport bulk materials over long distances, especially in the stone, soil, mining and brown coal industries. Despite good scrapers, material residue often remains on the conveyor belt because of striations and minor damage. The result large amounts of material accumulate beneath the conveyor belt system in the area of the return rollers, and have to be removed by costly cleaning work involving many workers. FTK TURN Operating principle The FTK TURN belt turning station made of highly wear resistant polyurethane turns the conveyor belt through 180 degrees after material transport directly in the reverse direction or into the lower drum. Because of the turning process, the inner, clean side of the belt which never comes into contact with the transported material now has its surface facing down towards the ground. Cleaning is a thing of the past!