Germany
Manufacturer/ Producer
Germany
TOPTICA Photonics AG offers a wide range of optical fibers ideally suited for use with TOPTICAs lasers and FiberDock. These economically priced fibers cover a wide range of wavelengths. TOPTICA recommends to always purchase a fiber along with a laser and fiber coupler, as this ensures maximum fiber coupling efficiency.
Request for a quoteGermany
CoSy generates both purely Doppler-free and purely Doppler-broadened absorption saturation spectra, which can be fed directly to appropriate stabilization electronics. CoSy can conveniently be used for top-of-fringe stabilization with a modulation technique (bandwidth 50 kHz .. 1 MHz). The CoSy module helps the customer save time and space in his experiment. The absorption cell of the Cosy is filled with Rb, Cs and K and serves as a frequency reference for Rb, Cs and K frequencies from a single device.
Request for a quoteGermany
The FiberOut fiber collimator transforms the divergent beam emitted at the end of an optical fiber into a collimated one. It can be equipped with a variety of lenses, matching different fiber mode-field diameters and output beam sizes. The rugged, inexpensive collimator can be used for both FC/PC and FC/APC-type connectors. It can be easily mounted on post or into optical mounts (25 mm diameter).
Request for a quoteGermany
The FiberDockTM is an easy-to-use fiber coupler, suitable for both TOPTICA laser systems and third party lasers. Its patented design (US 7,321,706, EP 1,666,944) enables highest coupling efficiencies, combined with an impressive long-term stability. Based on the individual laser parameters such as wavelength (range 350 nm to 2800 nm), beam diameter and the mode field diameter of the coupled fiber, a suitable focusing lens is selected and integrated inside the FiberDockTM.
Request for a quoteGermany
The FPI 100 is a confocal, scanning Fabry-Perot interferometer with a built-in photodetector unit, designed for measuring and controlling the mode profiles of continuous wave (cw) lasers. The FPI is available with different mirror sets and photodetectors for wavelength ranges between 330 nm and 3000 nm. The standard mirror reflectivity is 99.8 %, corresponding to a typical finesse of > 400, resolving even narrow laser lines.
Request for a quoteGermany
TOPTICA Photonics is the number one supplier for laser diodes, providing the widest and most continuous coverage available within the optical spectrum. Our laser diodes have been thoroughly examined in an external cavity diode laser configuration. Based on our extensive testing we can ensure the highest quality to our valued customers.
Request for a quoteGermany
TOPTICA Photonics is the number one supplier for laser diodes, providing the widest and most continuous coverage available within the optical spectrum. Our laser diodes have been thoroughly examined in an external cavity diode laser configuration. Based on our extensive testing we can ensure the highest quality to our valued customers.
Request for a quoteGermany
Distributed feedback (DFB) laser diodes feature a grating structure within the semiconductor and thus operate in both longitudinal and transverse single mode. Tuning is achieved by modulating either the laser current or the chip temperature. Mode-hop free tuning is maintained over several hundred GHz. Applications include alkaline spectroscopy, laser cooling, gas detection and the generation of tunable cw terahertz radiation.
Request for a quoteGermany
Tapered amplifier (TA) diodes combine the "best of both worlds": They amplify laser radiation into a nearly diffraction limited beam to powers that would destroy the facets of normal laser diodes. At the same time the spectral properties of the master laser are preserved. TOPTICA offers TA chips separately, but also integrates them into convenient laser systems (TA pro and BoosTA)
Request for a quoteGermany
The wavelength meters of the WS series accomplish wavelength measurements with highest accuracy. Both cw and pulsed lasers with narrow-band emission can be examined, monitored and even actively controlled. Various models of the WS series are available, covering UV to IR wavelength ranges (192 nm - 11 µm). Based on a rugged Fizeau interferometer setup without any moving components, the wavelength meters provide quasi unlimited lifetime.The spectrum analyzers LSA and HDSA allow for multi-line or broadband spectrum of light sources like cw and pulsed lasers, gas discharge lamps, super luminescence diodes, semiconductor laser diodes and LEDs.
Request for a quoteManufacturer/ Producer
19 Lochhamer Schlag
82166 Gräfelfing - Germany
Germany
The T3 system combines smooth operation, low noise, simple assembly, and economy. The side bands, which snap together, replace a conventional pin and bore connection and prevent relative movements between the joints giving extremely low wear. This means virtually no wear or abrasion (cleanroom). The t-band's geometry means that hardly any polygon effect is generated when the energy chain is placed. The t-band therefore rolls in a very smooth arc, giving extremely low vibration and noise. In order to reduce the manufacturing and installation costs, the t-band is not mounted individually, but – much like the E3 system – in an eight-link length. Due to its low mass, the t-band is suitable for applications with low fill weights and short strokes combined with high speeds and accelerations.
Request for a quoteGermany
Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier. - Option without camber (NC) simply by turning the inner link - Extremely quiet due to the small pitch and "brake" in the stop-dog system - (E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479) - Extremly low vibration - Low-abrasion connector system (no bolts and holes necessary) - Virtually no polygon effect, thereby "smooth rolling" operation - Smooth interior design for a long lifetime for cables and hoses - E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii - Weight savings approx. 30% compared to the E6 system - Cost-effective
Request for a quoteChina
Product model :X-7600 Magnification :200X Detection accuracy :5um The use of the world's top HAMAMATSU Japan X-ray source can easily identify the semiconductor packaging gold wire bending gold wire fracture, large load table, can be placed in a large industrial control board ultra-long LED light bar applicable to various fields of electronic products
Request for a quoteUnited Kingdom
We have over 10 Million Lines of Components in our Supply. We Supply the FULL Range of Analog Device Components
Request for a quoteCreate one request and get multiple quotes form verified suppliers.