United Kingdom
Manufacturer/ Producer
United Kingdom
The Rotonivo® rotary paddle level switch from UWT operates reliably and maintenance-free and offers a compatible solution for plants for safe level detection in bulk solids. It has all current international approvals for use in gas and dust explosive atmospheres and is one of the first rotary vane detector certified according to SIL 2. Overfill protection and no-load protection are guaranteed for the long term. The three Rotonivo® rotary paddle level sensor series RN 3000, RN 4000 and RN 6000 cover the complete range of applications, from simple to extreme.
Request for a quoteUnited Kingdom
The Vibranivo® - vibrating fork for point level measurement, with its robust stainless steel extension and high sensitivity, is widely used in storage silos and process vessels. The Vibranivo® vibration level switch is robust, easy to operate and can, via its series range, be precisely configured for each application. Electronically stimulated piezos cause the fork to vibrate. As soon as the sensor is covered with material, the vibration is dampened and the resulting electrical current change causes the output signal to switch. Once the material level falls below the sensor, it is free to vibrate again and the output signal is reset. International approvals for use in hazardous locations (gas and dust).
Request for a quoteUnited Kingdom
The capacitive point level sensor Capanivo® CN 4020 is used in storage and process vessels as a full, demand, and empty detector in all bulk solids from a DK value of 1.6. The probe made of glass fiber reinforced PPS plastic is FDA compliant and also suitable to be used in food. Due to its "Active Shield" function any buildup does not in any way affect the accuracy of the measurement results of the sensor. Your benefit: - Very cost-effective level limit switch in bulk solids - Simple, reliable and maintenance-free multi-talent in bulk solids - Plug and play level limit switch without calibration
Request for a quoteManufacturer/ Producer
20 Main Road
SY5 7JW Dorrington - United Kingdom
France
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.).
Request for a quoteGermany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteGermany
The SENSORMASTER 9163 covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via USB, RS232 or analog output. Features: — For force, pressure or torque measurements using strain gauge sensors — For position or angle measurement using potentiometric or DC/DC sensors — For temperature measurement using Pt 100 sensors or thermocouples — Optional multi-channel model — Optional Profibus or serial interface — 0.1 % measurement accuracy plus sensor-specific linearization — Range of mathematical functions (e.g. differential measurement) — OK/NOK feedback on multi color display and via 4 alarm limit outputs — High sampling rate (500/sec.)
Request for a quoteGermany
Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.