WALTER STAUFFENBERG GMBH & CO. KG

▪ Saddles according to DIN 1596: Single-ended design ▪ Saddles according to DIN 1597: Double-ended design ▪ Covering all standard metric and imperial diameters between 5,5 mm and 115 mm / .22 inch and4.53 inch

▪ Two-part-weld-construction for welding or anchor bolt fastening ▪ Covering all standard metric and imperial diameters between 220 mm and 1016 mm / 8.66 inch and 40.00 inch ▪ With either 4 or 5 plastic pads, depending on size and diameter

▪ Clamp assemblies designed to mount directly to 41,3 mm / 1-5/8 in wide strut channels, such as the STAUFF Channel Rail, type SCS ▪ Suitable for most Fluid Power applications ranging from mobile equipment to industrial machinery ▪ Reduced horizontal mounting space ▪ Easy installation and retro fit capability ▪ Reduces shock and vibration while preventing galvanic corrosion

Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 10 mm / .24 inch to .39 inch. Clamp bodies manufactured from Polypropylene. Excellent UV, weathering and chemical resistance – even under extreme conditions.

▪ Flip the clamp body to choose between the radius grooved or the v-grooved design (suitable for a range of diameters) ▪ Use M10 or 3/8–16 UNC bolts or screws (preferably with washers) to fasten clamp bodies directly to the machine ▪ Clamp bodies can be stacked for multi-level assembly

Designed as tubular support, vibration and noise absorber and protection element for rigid return lines entering the hydraulic reservoir Features ▪ For all commonly available Metric and imperial pipe and tube diameters from 6 ... 42 mm and 1/4 ... 1-1/2 in ▪ Easy installation ▪ Chemically resistant against oil and solvents Materials ▪ Bushing made of Polypropylene (PP) or Thermoplastic Elastomer (TPE) with a hardness degree of 87 Shore-A Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP)

STAUFF Connect 24° Tube Fittings with Cutting Ring have been developed and designed for the reliable, leak-free connection of metric tubes with outside diameters between 4 mm and 42 mm / between .16 in and 1.65 in respectively. Therefore, the most relevant key dimensions of the tube fittings (e.g. through bores and widths across flats) also have metric dimensions. With regards to their dimensioning and general design, STAUFF Connect 24° Tube Fittings with Cutting Ring fully comply with the latest versions of the ISO 8434-1 and the DIN 2353 standards. The operating principle of STAUFF Connect 24° Tube Fittings with Cutting Ring is based on a double-edge cutting ring, which cuts into the tube twice, thus ensuring the necessary force and form closure in the cutting area. Thanks to the optimised geometry of this ring, the two edges do not cut simultaneously, but rather one after the other. In addition to increasing the incising effect, this method maximises the tear strength of...

Soft-Sealing Cutting Rings provide an additional safety and protection against potential leakage risks, e.g. caused by the settling of purely metallic sealed connections, temperature fluctuations or considerable pressure and vibration loads in the system. "Sweating effects" on the connection points can be permanently avoided. The type FI-WDDS Soft-Sealing Cutting Ring of the STAUFF Connect range is characterised by the elastomer sealing, which is located in a specially designed groove close to the rear end of the 24° taper and protected to prevent loss. An additional o-ring is used to secure the secure the second potential leakage path between the cutting ring and the tube – even in the event of unfavourable tolerances FKM/FPM (Viton®) is used as the standard sealing material and enables problem-free use of the system for challenging applications involving high temperatures or aggressive media. Like all other components in the STAUFF Connect product range, the cutting ring...

Due to the 24° taper (with o-rings) located on the fitting body itself, STAUFF Connect Tube Fittings with 24° Taper / O-Ring (DKO) represent a logical further development of traditionally available adjustable standpipe tube fittings with factory-assembled cutting rings and union nuts. The retention function is assured by a special swivel nut with a wire-pin located in a groove, which is factory-assembled by the manufacturer. The embedded o-ring on the 24° taper ensures a high level of protection against leakage. Thanks to the large number of available types and designs, almost all common types and combinations of adjustable fittings can be implemented. With regards to their dimensioning and general design, STAUFF Connect Tube Fittings with 24° Taper / O-Ring (DKO) fully comply with the latest versions of the ISO 8434-1 standard. They are thus completely interchangeable with conventional adjustable standpipe tube fittings.

Performance The patented STAUFF Form tube forming system is without doubt one of the most high-performing solutions currently available on the market for connecting metric sized tubes. Apart from its simplicity, it also provides a maximum level of safety, reliability and reproducibility. STAUFF Form has been designed as standard for seamless cold-drawn precision steel tubes as well as stainless steel tubes with dimensions between 6 x 1.5 mm and 42 x 4 mm in the Light Series and between 6 x 1.5 mm and 38 x 6 mm in the Heavy Series. Parameters for alternative materials (copper, brass, CuNiFe, Tungum etc.) can be added by the manufacturer, if required. System Design and Components The system is based on standard parts and consists of only four key components: The STAUFF Form Ring with an integrated and thus undetachable elastomeric sealing is slid onto the tube end, which has previously been mechanically contoured. This creates a positive-locking connection that provides a...