power electronics Germany

...Type UTL/UTTL I Category Transformers Design Network Transformer (single-phase) Isolation Transformer (single-phase) Application UTL For supplying electrical consumers of all kinds, e.g., devices for measurement and control technology, power electronics, etc. Customized sizing and design ensure optimal usability. UTTL For supplying electrical circuits or devices that require electrical...

...Compact and powerful servomotor for complex positioning tasks. Easy installation, space-saving design. Hollow shaft with diameters up to 14 mm. 50 W, 24 V brushless DC motor, long lifespan. Integrated power electronics and control with protection against reverse polarity and overloads. Integrated absolute position transmitter on the output shaft. Built-in CANopen or Profibus DP with M12 connectivity. Integrated RS485/SIKONETZ5 interface with M8 connectivity. IO-Link.

...— For the convenient operation of steam boilers up to 4,000 kg/h of steam — Appealing price-performance ratio for steam boilers up to 4,000 kg/h of steam — Colour touch display for easy operation and clear visualisation of operating status — Flexible installation and small space requirement: installed on the boiler at the factory or loose control cabinet for wall mounting — Power electronics for fuel supply, feed water pump, blow-down and desalting — Optional: fully automated and conductivity-controlled blow-down and desalting...

...Compact SMD Power Ferrites for EMI Suppression Magnetically Shielded Design High Current Capacity up to 10 A Nickel-Zinc Core Materials for Broadband Suppression Applications Motor Suppression Switching Power Supply Suppression Filter Circuits in Power Electronics...

...To ensure the lifespan and performance of electronic components, effective cooling management is essential. The continuous miniaturization of components, coupled with increasing power density, demands efficient heat dissipation concepts. We provide custom heat sinks for optimal cooling solutions for your electronic products. We can supply heat sinks in all sizes and shapes: from small SMD heat...

...DC UPS are used to buffer a voltage over a certain period of time. Available versions: - Use in DC systems - Output voltage: 12 V or 24 V - Output current: 10 A or 5 A - Battery capacity: 6.8 Ah or 3.4 Ah - Smart UPS with SMS function Integrated features: - Charge controller for recharging (maintenance charging) the batteries - Power failure signal - Deep discharge protection - Signal for...

... production of power supplies and power electronics for the necessary energy boost of various devices. In the field of communication, you can find our assembled circuit boards, among other things, in radio transponders. We are not lacking in insight and a good sense of temperature, as we provide you, our customers, with the best quality as a manufacturing partner for industrial LED applications, heating technology, and cooling devices.

... buttons located on the front panel. The devices are installed in a control cabinet or a similar protected enclosure. The EGE evaluation electronics from the product series SKM 420; SKM 520; SKM 552 are suitable for a power supply of 24 V DC or 230/115 V AC.

... particularly used in the following industries/applications: Automotive industry Construction industry Glass and facade construction, window manufacturing Shipping / Offshore / Wind power plants Electronics industry Manufacturers of white goods...

...HF Generators of the New Generation When it comes to coating or structuring surfaces, a stable and reproducible plasma power supply is crucial. The TruPlasma RF Series 1000 / 3000 (G2/13) HF generators, equipped with modern power electronics, provide the best conditions for this: Thanks to their stable output power and high regulation accuracy, they ensure optimal results while maintaining high productivity. Output frequency: 13.56 MHz...

... encoder Ideal for use wherever an explosion-proof drive is essential. Depending on the application area or power class, also available with integrated electronics and gearbox, as well as pure rotor + stator solutions.

... stops of diesel generators, the load sharing, synchronising the generator set power and also the use of the energy storage system (ESS) of hybrid and fully electric propulsion systems. CPU based multi-master system for flexible system scalability Safety through redundant communication Different operation modes Easy system configuration Intelligent control of energy storage systems Standardised interfaces to higher level systems Remote access for maintenance and service Approvals in preparation: BV, DNV-GL, LR...

... load cell and weighing station is not limited factory pre-configured scale available static or dynamic IP assignment (DHCP) easy remote maintenance of weighing technology calibratable solution in conjunction with our net-weigh weight display Stainless steel housing IP65 Di50 baseboard with Ethernet connection power supply via PoE load cell digitizer LDU 78.1 3 cable glands for load cell, Ethernet cable, and contacts (LTS) housing size: 165x95x30 (HxWxD)...

...Motor starter systems for motor-close and decentralized use in harsh industrial environments Supply voltage at AC 50 Hz: 400 V Rated operating current of the motor: 4.0 A Rated power of the motor (min. - max.): 0.09 - 1.5 kW Number of inputs/motor outputs: 3/1 Switching frequency (max.): Application-dependent Protection class: IP65 Mounting direction: Horizontal and vertical Ambient temperature: -20 to +40° C AS-Interface specification: V3.0 Motor protection through thermal motor model: Yes Approvals: CE Feature: Start-up time podis®/gesis® MSS: 0.1 - 10 s...

...Control unit for LINAK linear drive systems - lightweight, flat & plug-and-play compatible for desks and workstations. Low power consumption (<0.1 W) in standby, PVC-free, quiet in operation.

...Traveling Wave Tubes (TWT) remain the best technology for generating high-power microwaves across a wide frequency range.

...The AQUILA lasers are particularly robust: they are designed for operation under harsh conditions. Due to their high average power (120 or 200 watts), they are suitable for many applications.

... with LAN, CAN, and GPIB interfaces, controllable via SCPI commands. For safety, current, voltage, power, and temperature limits, as well as reverse polarity protection, are built-in. Operating modes: CC, CV, CR, CW, CC+CV, CR+CW Load simulation for LED drivers, battery test mode, short circuit function, transient operation, dynamic testing, storable profiles, curve diagrams, long-term diagrams, data export in CSV format.

... light masts are available either with an integrated generator or without one. Furthermore, the world's first battery-operated hybrid light mast is presented. When the battery charge is depleted, a high-quality power generator takes over the power supply for the lamps. Custom manufacturing of light masts is also possible: (030) 36 75 86-160.

...Fiber Lasers from Telesis for Your Marking Application Telesis fiber lasers are the right choice for marking a variety of products. Available in different power levels - from 10 to 100 watts. As a complete solution in a laser safety enclosure or as a custom special solution. We help you find the right solution for your marking application.

...Cable management and power accessories: cable chains, assembly tool for cable chains, cable penetrations with lid, cable misalignments, cable grommets, cable holder, flat cable clamp, pipe and cable clamps, cable clips, cable ties, cable drillers, strain reliefs, cable terminals, cable, Fastfix band, monitor arms...

... and a powerful controller. No prior knowledge of industrial image processing is required to operate your flexible pick & place application. - Camera with lens - Controller - Power cable - Calibration plate - Software accessible via any web browser - Free plugins for various robot manufacturers...

... and outside buildings, to power-saving handheld devices, to visually interesting applications. The following advantages can be realized: - Sunlight suitability - Temperature range: from 0 to +50 degrees Celsius - Extremely good viewing angle - High resolution - No-power display / power outage resistant - Long-term availability...

... participants: max. 64 DALI transmission rate: 1.2 kbit/s at Ø 1.5 mm²: max. 300 m at Ø 1.0 mm²: max. 238 m at Ø 0.75 mm²: max. 174 m at Ø 0.5 mm²: max. 116 m Line resistance (single length): max. 4 Ω Line resistance: max. 8 Ω Cable type: Sheathed cable 230 V, e.g. NYM Single-stranded: 0.5 ... 4 mm² Fine-stranded without ferrule: 0.5 ... 4 mm² Nominal voltage: AC110 ... 240 V ~ DALI protocol: EN 62386 Power consumption: max. 6 W...

...The VAHLE Multi-Carrier is tailored to meet the diverse requirements of ground-based storage and conveyor systems, such as stacker cranes and transfer cars. The Vahle Multi-Carrier can be quickly and easily equipped with various VAHLE power rails. With the new VAHLE Multi-Carrier, VAHLE has developed a product specifically designed for the various needs of ground-based storage and conveyor...

...power electronics, power transmission and transformation, automotive industry, molds, communication technology, cables, machining, metallurgical chemicals, construction industry Production capacity: 100,000 tons Honorary titles: Zhejiang Famous Brand Product ...

... in four sizes (WxH) with up to 12 thermocouple channels • Field-replaceable NiMH battery and charging via any USB power supply, ensuring the DATAPAQ DP5 is always ready for use. • More convenient operation with start/stop buttons and time or temperature triggers. Temperature measurement range: -100 °C to 1370 °C Number of measurement channels: 6 or 12 Data logger accuracy: ±0.5 °C (for...

... materials: PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate Seal materials: FPM, optional: EPDM, FFPM Electronics: ARM Cortex M3 microprocessor Motor: brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors Electrical connection: D-sub plug, 15-pole (male connector) Power supply: 24 V DC ±10 %, max. 1.5 A Interface: RS-232...

... (industrial standard), allowing for control by a higher-level system. Device: PGS061P Max treatment width: 15 mm System dimensions (mm W x H x D): 470 x 210 x 530 mm Power supply: 230 V, 50/60 Hz Air consumption: approx. 30 l/min Compressed air connection: 4-6 bar Weight: 21 kg...

...Features — 4-pole rotor with plastic-bonded magnets NeFeB — Threefold winding connected in delta — Internal Hall sensors for rotor position detection offest by 120° — Ball bearings — Multiple combination possibilities with gears, encoders, brakes — Power output in rated operation: 15,1 Watt — Multiple combination possibilities with gears, encoders, brakes and integrated electronics AC/DC:3-phase Type:EC Voltage:12V Other characteristics:4-pole,precision...