Results for

Release agents - Import export

55 Companies

101 Products

Product recommendations

Germany

Germany

Germany

Germany

See more products

WACHSFABRIK SEGEBERG GMBH

Germany

With us you are in good hands. Benefit from tailor-made solutions from a family-managed company with extensive experience, great expertise and experienced employees. The focus of our daily work is your success, which we have embodied for more than 65 years. As a modern family-managed industrial company, we capitalise on the development and co-creation of your innovative ideas and products. As a result, we can quickly, flexibly and precisely react to varying requirements, and always give you our full attention when implementing your requirements. In the area of payroll service for the DEVELOPMENT, PRODUCTION, BOTTLING and PACKING of chemical, technical and cosmetic products, we offer you everything from a single source, from the initial idea to the finished product.

All the products for "release agents"

Oskars M-800

Oskars M-700

Release waxes

Industrial care

Website See all products
RHEIN-CHEMOTECHNIK GMBH

Germany

RHEIN-CHEMOTECHNIK GMBH. We specialise in concrete additives and surface protection products for the concrete processing industry. Our product range includes over 200 products from the following areas: Concrete additives, surface protection products, concrete release agents, cleaning and maintenance products, granulate for scratch and layer protection, dosing systems. Experienced concrete engineers (VDB) and consultants help you to select the right products, perform suitability checks in the laboratory or in the factory and to work out company-specific solutions. All products and services are measured and assessed according to the specifications of the QM system certified according to DIN EN ISO 9001. In addition, all concrete additives that are used for unreinforced concrete, reinforced and prestressed concrete, for cast-in place concrete and ready-mixed concrete, and for concrete for prefabricated parts, correspond to the EN 934-2 standard. In-house production control is monitored by an independent monitoring organisation (MPA NRW).

All the products for "release agents"

tectol Formenöl RC 120 P

tectol CoatRelease 2

tectol Trennmittelkonzentrat M tectol Trennemulsion GF

tectol Supercast 1030

tectol Supercast 1020

Website See all products
JOKISCH GMBH

Germany

Since its foundation in 1961, Jokisch GmbH has become one of the top names for technical chemical products and their use in the metalworking industry. Our products include: Drilling oils, brake cleaner sprays, thread cutting oils, skin protection products, cooling lubricants, lapping compounds, lubricant refills on contract, private label chemistry products, lubricants for metalworking, cutting oils, cutting oil sprays and specialist lubricants for minimum quantity cooling lubrication systems.

Website
CHEM-TREND (DEUTSCHLAND) GMBH

Germany

Chem-Trend is the most proven partner in the world for release agents, purging compounds, and other related process chemical specialties. Using a customer-centric approach combined with deep research and development, Chem-Trend is dedicated to providing expertise and innovative solutions to improve product quality, production efficiency, waste reduction, and sustainability for its customers now and well into the future. Chem-Trend offers a globally integrated network of experienced, knowledgeable, and insightful production and technical experts, with leading-edge research and development facilities supporting myriad industries and needs. Chem-Trend serves customers through offices in North America, South America, Asia, and Europe and is part of the Freudenberg Group. We are specialised on the development, manufacturing and marketing of: Mould Release Agents Purge Compounds Mould Maintenance Products (Cleaners and Degreasers, Lubricantes, Mould Protectants, Anti-Corrosion Agents) Hydraulic Fluids Plunger Lubricants Moulding of composites Die casting Friction Moulding of Polyurethane (PU Foam) Moulding of Rubber Moulding of Thermoplastics Tyre Paints (Release Agents) for Tyre Manufacturing Tyre Paints (Release Agents) for Tyre Retreading Mould Maintenance Release Agents for Wood-Composites

Website
TER CHEMICALS DISTRIBUTION GROUP

Germany

The TER Chemicals Distribution Group is a globally active distributor of special chemicals and food additives with branches in 16 countries. Products offered range from additives, waxes, resins and plastics of all kinds, through pigments and special chemicals right up to additives for the food and animal feed industry. As a committed technical and chemical consultant in Europe, our mission is to generate added value with our qualified specialists, quality products and outstanding service. It is our vision to be the first-choice distributor for our customers and suppliers. For us, the satisfaction of our customers and suppliers is the standard for our definition of quality. Trust is good, monitoring is better. Compliance with quality assurance measures is ensured through regular checks and audits: ISO 9001, ISO 22716, AEO F, Ecovadis, FAMI-QS, HACCP, Responsible Care, BIO certificate

All the products for "release agents"

Erucamide Wax

Bees Wax

Hdpe Waxes

Thickening Agents

Cellulose Ethers

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

TRIBO-CHEMIE GMBH

Germany

Tribo-Chemie GmbH is your competent and reliable partner in the field of tribology. We specialise in release agents for die-casting, forging and other special applications. For 25 years, we have worked with our customers to solve technically challenging problems. New recipes using exceptional raw materials are perfected in manufacturing terms for customer use. Increasingly complex processes and component demands require not only trials carried out on our customer’s sites in the presence of technical experts, but also often the development of customer-specific solutions. Our own demands in terms of high environmental compatibility and resource preservation are outstandingly addressed by the R&D department. A motivated team ensures that everything runs like clockwork from the development phase to delivery and use by the customer. Our Graphitex® and Isolat® products for forging and die casting are impressive, thanks to improved and optimised processes available to the user. Our Graphitex® and Isolat® brands are sold worldwide.

All the products for "release agents"

Graphitex RS 44

Graphitex CR 3401

Graphitex 37 B

Isolat 4080 - emulsion for magnesium die-casting

Isolat 4007 GF - release agent for aluminium die casting

Website See all products
LATRO KIMYA DIS TIC A.S.

Turkey

At Latro, our journey began with a commitment to delivering exceptional performance through our raw materials. Established in Istanbul in 2010, we've since expanded our offerings to encompass a diverse range of applications including hair care, skincare, color cosmetics, home care, textile, and agrochemicals. What sets us apart is our collective approach to innovation, fostering teams characterized by autonomy and guided by shared purpose and values. Within our ecosystem, we cultivate a culture of exploration, creativity, and entrepreneurship, driving us to deliver solutions that transcend conventional boundaries. Our dedication to excellence ensures that those who utilize our raw materials experience outstanding performance, empowering them to create products consumers can trust and believe in, across various industries and applications. Contact us for more information on how Latro Kimya can fulfill your chemical solution needs!

Website See all products
AIGREMONT

Belgium

MASTER MARGARINE MANUFACTURER SINCE 1934. A 100% family business, s.a. Aigremont n.v. is specialised in the manufacture of margarines and fats. The expertise we provide our clients comes from our roots in a business we have known inside out for almost 100 years. Our policy is to constantly invest in high-tech equipment. The quality of the technology of products as well as special attention to customer service.

Website
JOST CHEMICALS GMBH

Germany

Since 1973, JOST CHEMICALS has been a renowned, certified manufacturer and partner for the use of release agents, corrosion protection, cleaning agents and lubricants. We stand out with our practical experience in the use of high-performance release agents and special release agents. We would be happy to help you decide which product is best suited to your application and your machine and, most importantly, where you can really save money. This is what you can specifically expect from us: Extreme flexibility, from the smallest to the largest packing drum/purchase quantity, tailored support from a specialist assigned to you, extensive knowledge of processes across different industries, flexible employees with a focus on practical work, unbureaucratic applications, even at short notice, development of customised solutions.

All the products for "release agents"

Aqua Release 470

Mold Sealer S-31

Spacewax Sealer

JC 640

Treil Part 778 B

See all products
VOELPKER SPEZIALPRODUKTE GMBH

Germany

Due to their unique properties, VOELPKER‘s wax additives are established as multifunctional high-performance additives in the plastics industry, incidentally also in recycling. They serve, among other things, as viscosity-regulating combination lubricants, dispersion aids and surface improvers, especially if special quality requirements have to be met. Our customers are plastics processors, compounders and masterbatch manufacturers mainly in the engineering plastics sector. As an additv manufacturer, we see ourselves as a partner to our customers, especially in overcoming ever new challenges in process optimization and end product improvement. With our very diverse CEVO® portfolio, we offer ready-to-use additive formulations that can make a decisive contribution to meeting very specific requirements. The targeted interaction of the formulation components creates synergy effects, from which the special effectiveness of the CEVO® additives results. These field-proven complete solutions are designed for specific polymers, can be specifically tailored to individual customer needs and make a decisive contribution to increasing process cost efficiency. Lutz Matthies

All the products for "release agents"

CEVO®-process J-3405 - for TPU

CEVO®-process A-3100 - for PA

CEVO® process B-3680 - for recycling PE/PP

CEVO®-process J-4055 - for engineering plastics

See all products

NANOPHYLL - SMART COATINGS

Canada

NanoPhyll develops smart coatings that can be applied to existing surfaces. Our coatings are self-cleaning, anti-microbial, anti-adhesion and anti-graffiti, and are intended to help a wide range of industries such as oil and gas, construction, health care and municipal services. NanoPhyll's team combines experts in material engineering, nano-materials, polymer and bio-chemistry. Our self-cleaning technology is activated by the immediate environment — notably by natural light — eliminating the need for heavy detergents, surfactants and acids. Our coatings remove pollutants like nitrogen oxides from the air, helping to reduce smog and related acid rain. NanoPhyll's coatings are bonded firmly to their substrate materials when applied, which makes for a higher quality product and less time and money spent on reapplications. Moreover, interior allergens which often cause respiratory diseases can be reduced effectively with our coatings. Our coatings can be used for: - Deodorizing every accommodation (sickrooms, operating rooms, hygienic areas, fitness centres, dental clinics). - Prevention against virus and germs in guestrooms and areas with high hygiene requirements. - Self-cleaning facades and outer surfaces.

All the products for "release agents"

SuRelease™ Nano 950

EasyClean™ Anti Ice

See all products
KOLOGLU GROUP

Turkey

With over 30 years of experience, Kologlu Group overviews composite sector raw and semifinished products sales using two storage facilities on the Asian and European sides of Istanbul. Kologlu Group is proud to be a distributor of Jushi Fiberglass glass fiber, Promox organic peroxides, CCP Composites polyester resins, and gelcoats, Chemtrend mold release agents, Spheretex core materials and auxiliaries, Italbeit pigment pastes, Sasol paraffin waxes. Our headquarters in Istanbul, the Group has offices in Antalya, Bursa and Izmir, and representations in Russia and Peoples Republic of China. The three local offices locations are defined by the composites industry high activity in those areas. www.kologlugroup.com https: //tr.linkedin.com/company/kologlu-dis-ticaret

Product recommendations

Release agent H1

Germany

See more products

TYGRIS LTD

United Kingdom

Tygris Ltd. is a manufacturer of quality products and solutions tailored to the everyday cleaning, lubricating and protecting solutions for engineers and maintenance professionals across all industries. Tygris’ products are namely used in the plastic moulding, food processing and oil and gas related industries.
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH

Germany

Our patented casting resin system, ALWA MOULD D, is the fastest curing casting resin system in the world. It is very easy to process and does not need to be post-tempered. Our easy to use system has a pot life of only 20 minutes! Deep drawing can take place immediately after demoulding. From 1 to 2500 kg, everything from large bathtubs to small chocolate moulds can be cast. Commercial vehicle manufacturer Aixam has been successfully working with our system for years. With our innovative ALWA POR porous plates, the time-consuming drilling of vacuum holes is no longer necessary. They impress with high stability, compressive strength and a permanent temperature resistance of over 190 °C. ALWA POR is suitable for vacuum deep drawing and forming processes as well as aeration for aquariums, fish ponds and sewage treatment plants, ventilation of injection and blow moulds, all processes with hot air and steam, vacuum clamping technology, filter applications, air film sliding technology, foundry, etc.

All the products for "release agents"

ALWA release lacquer

ALWA surface tension remover

ALWA release wax

ALWA release spray

Release agent H1

Website See all products
L. BÖWING GMBH

Germany

L.Böwing GmbH is a medium-sized family business with great team spirit and fast lines of communication. This makes us highly flexible and allows us to maintain a strong focus on customer satisfaction. L.Böwing GmbH has been certified in accordance with DIN EN ISO 9001 since June 2000. (Reg. no.: 73 100 777) The implementation of this standard by our quality management system has documented the effectiveness of our quality control over the years. L. Böwing GmbH manufactures, develops and trades technical excipients such as release agents, lubricants, grease, defoamers, adhesives, casting compounds as well as fuels and raw materials. Our brands are: - Elbesil- Elbeol- Lobosil- Trennfix- LOBOCLEAN- LOBOTHERM. We offer to carry out research or development work to ensure that we find a problem solver perfectly tailored to your needs. Close cooperation and personal consultation are our most important values.

Website
ECKARDT SYSTEMS GMBH

Germany

The foundation stone for our medium-sized family company was laid down by our two founding company directors Manfred and Thomas Eckardt. In 2002, we celebrated our company's anniversary; 25 years of standing for reliability, good service, continuity and growth. In mid 2001, our Company Director Manfred Eckardt died. Shortly afterwards his son Thomas Eckardt unexpectedly also died, upon which our management changed in mid 2002. Mrs. Beate Eckardt was the new Managing Director of the company from then on (March 2002 until May 2005). Since 1st June 2005, Mr. Axel Eckardt has been the Managing Director of the company. Eckardt & Sohn GmbH and will continue to run the company as before. Eckardt & Sohn operates locally as well as globally. The broad range of our services and our many years of experience mean we can satisfy any customer's specific requests.

All the products for "release agents"

Spray and spit nozzles

Spray lubrication

Spray and spit nozzles

Spray and spit nozzles

Spray and spit nozzles

Website See all products
OKS SPEZIALSCHMIERSTOFFE GMBH

Germany

OKS Spezialschmierstoffe GmbH has developed and produced speciality lubricants and chemo-technical maintenance products for industrial maintenance, servicing and production for over 40 years. OKS offers a wide range of state-of-the-art, high-performance lubricants and distributes these to industrial and commercial users all around the world via technical retailers. The company's strong focus on having retail partners who undergo continuous training ensures that customers on-site are provided with high-quality advice and problem-solving skills. All OKS products are characterised by their high reliability, quality and cost-efficiency and are produced in accordance with strict environmental and quality requirements at the company's site in the municipality of Maisach, on the outskirts of Munich in southern Germany. From here, OKS products are dispatched all around the world. Since 2003, OKS Spezialschmierstoffe GmbH has been part of Freudenberg Chemical Specialities SE & Co. KG, a company in the Freudenberg Group.

All the products for "release agents"

OKS 1360 – Silicone Release Agent

OKS 1511 – Release Agent silicone free Spray

OKS 1510 – Release Agent silicone free

Website See all products
TEMIS ITALY

Italy

For over 10 years we have been supplying tools, materials and training for tyre producers and retreaders throughout Europe and all the other continents. We are specialised in equipment for tyre die cleaning and maintenance which is a key process for the look and perceived quality of new and retreaded tyres. We provide producers and retreaders with innovative solutions as well as well proven technologies.

All the products for "release agents"

Tire Mold Release Agents

See all products
MANTIS ULV SPRÜHGERÄTE GMBH

Germany

Industrial applications – We develop special spraying systems known as the MANTIS-ULV® range for applying release agents in the concrete industry, for example, for customers from various industrial sectors. Weed control – Our MANKAR® product range provides the highest level of efficiency for professional use of herbicides. Our range of models includes handheld devices, machines which are pushed and can be fitted and attached to vehicles. Crop protection – Our MAFEX® product range for handling fluids used in crop protection and for applying liquid silage additives. Our products include: Conveyor belt spraying systems for lubricants, dosing devices, dosing quantity control systems, micro dosing systems for liquids, micro lubrication systems, spraying systems for oils and other liquids, spraying systems for dust control, spraying machines, spraying machines with a stainless steel valve, spraying machines for applying oils and cooling lubricants, industrial spraying systems.

All the products for "release agents"

Industrial Applications

Industrial Applications

Industrial Applications

See all products
SM-SERVICE, LTD

Russia

SM-Service, Ltd is an innovative chemical company founded in 2010. We produce a wide range of chemicals and related products for the aluminum, mining, paper and pulp, construction, chemical and food and canning industries (defoamers, corrosion inhibitors, release agents, lubricants for casting, cutting and treatment of metals, rheology agents, biocides, chemical products for water treatment, flocculants and also household chemicals). The main objectives of the company are import substitution in the Russian market and an increase in the company's export share. Our company is involved in development and production of industrial lubricants, industrial greases and special-purpose chemicals for a wide range of industries. The company’s production facilities make it produce a wide range of products for various industries. All processes are carried out using the state-of-the-art special equipment and monitored at every stage of production. Several independent production lines produce products of various forms: powder, suspensions, dispersions, emulsions and liquids.

All the products for "release agents"

Dewatering agent for the product hydrate

See all products

ALFRED SCHÜTZE APPARATEBAU GMBH

Germany

Extruding adhesives, release agents, oils, varnish, paint, shortening, fluids for use in the food sector, the pharmaceutical industry, etc. ..., everyone can find their optimum solution for their utilisation purpose in the broad SCHÜTZE product range. To us, spraying technology means precision. Continuous investments in modern manufacturing methods guarantee optimum quality when manufacturing nozzles, needles, air caps, as well as other SCHÜTZE spraying equipment components.

All the products for "release agents"

Automatic-spray valves

Automatic-spray valves

Automatic-spray valves

Automatic-spray valves

Material feeding

See all products
GLOBAL-CONCEPT GMBH

Germany

GLOBAL CONCEPT GMBH was founded in 2006 and is located in Brake, Germany. GLOBAL CONCEPT GMBH makes an active contribution to environmental protection by specialising in producing and distributing non-toxic, safe and easily biodegradable products. Especially in the field of transport, handling and storage of mineral oil or other hydrocarbon-containing products, the CYTOCLEAN® and the CATCO® - pac products have a wide range of applications from tank cleaning on board ships to use in metal processing and in fuel oil tank cleaning. The BIOREL® product is used as a biological form release agent in producing prefabricated concrete parts but also for on-site concrete production. The ready-to-use BIOREL® release agent emulsion is used in tar and road construction, among other things for transporting and processing asphalt mixes.

All the products for "release agents"

CYTOCLEAN®

BIOREL® Biological release agents

CATCO®-pac

See all products
SEJIN SMC CO., LTD.

South Korea

SEJIN GRP panels, which constitute the main body of this water tank, are manufactured by using SMC (Sheet Molding Compound: the mixture of unsaturated polyester resin, glass fiber, filler, mould release agent and catalyzer) in the hot press moulding process. They are assembled in the field by using steel stiffeners and bolts so that size and capacity can be designed without limitation.1. Sanitation- SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.2. Excellent durability- The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting.3. Absolute water tightness- Special sealants with international patents are used to guarantee water tightness.4. Design for versatile capacity5. Easy installation6. Outstanding insulation performance

All the products for "release agents"

GRP water tank

See all products
INDUSTRIAL CHEM SOLUTIONS INC.

United States

KT Chemicals is a specialty chemicals solution provider that combines safe, environmentally friendly chemistry and effective application equipment. Most importantly, we work with our customers to provide the highest level of service without the expensive price tag. KT manufactures several products like Asphalt Release Agents (ARAs), Industrial Cleaners Solvents and Lubricants, Environmental Remediation Gels/Films, Odor Eliminators and Consumer Friendly cleaners. Our products have a wide range of uses, including construction, environmental remediation, hazardous materials clean-up, nuclear decommissioning, industrial cleaning, and odor control. Strippable Remediation Gels/Films Apply, dry, and peel. KT makes several strippable coatings to remove heavy metals, meth lab contaminants, mercury, asbestos, chemicals, radioactive isotopes, and much, much, more. Works on concrete, steel, plastics, wood, and other solid surfaces. Please visit DeconGel.com to find out more. Asphalt Release Agents KT Asphalt Release Agents contain no dangerous chemicals and work extremely well on SMAs polymer, and "popcorn" asphalts. They’re safe to touch and dilutable up to 30: 1, but can also be used un-diluted. We think they’re the best working release agents on the market. We can also provide truck and plant spray systems, if needed. Our Asphalt Release Agents are available in 5-gallon buckets, drums, totes and bulk delivery.
K.H. SCHMALZ GMBH

Germany

Plant engineering and construction, as well as manufacturing and sales of dosing systems for central and local release agent supply systems, water treatment plants, high-pressure systems, frequency-controlled, water treatment chemicals, hardness stabilisers, corrosion-resistant materials, general dosing systems, water softening and servicing. A few more products: Dosing systems for mould release agents, water treatment for dehumidifiers, dosing devices, water treatment plants, legionella testing, etc.
THERMOVAC PLASTICS LTD

United Kingdom

THERMOVAC PLASTICS LTD is a trade vacuum former of Thermoplastic sheet materials e.g. ABS, Polypropylene, PVC, Acrylic and PETG, to name a few. THERMOVAC is a family run business and we export to all parts of the globe. We manufacture PVC skins for the door panel and Composite door markets, We manufacture moulds made out of ABS to the concrete precast industry for paving slabs, walling, fencing etc. We also manufacture POS / POP for the retail sector. As a compliment to the concrete industry, we are stockists of a vast range of concrete pigment and release agent. We also supply vacuum formings to all other manner of industry from Machine guards to car parts. We welcome all visitors to see our new, state of the art factory. A particular strength of THERMOVAC PLASTICS is our ability to manufacture to small medium or long runs. We have an excellent reputation for high quality products and first class customer service.
CONCENTROL

Spain

Concentrol is a chemical company formed by three large differentiated areas: food, release agents and specialty chemicals. Through these, we give worldwide service and coverage to a wide range of customers from the industrial sector. Our company supplies over 200 products used in the different processes of production and preparation. A large part of these products are now leaders in the international market. Concentrol permanently invests in and encourages initiatives in investigation and development of new products and formulas which provide solutions to emerging market requirements. The quality of the products offered by Concentrol is based on a firm commitment to R + D, with an investment in this area that represents 7% total of our business turnover, offering solutions to specific problems and developing work methods, that meet that meet the customers’ needs, always bearing in mind the natural environment. The facilities are diversified in five centres with laboratories and production areas specialized in research and development, in which teams of highly qualified researchers work. The process of research and development at Concentrol is completed by linking these areas with universities. The result of all this, is the link with the University of Girona, among others, through their PhD program; a project that allows constant knowledge transfer between business and the academic world.
ADOMAST MANUFACTURING LTD

United Kingdom

Adomast Manufacturing Ltd, has been producing chemicals for the construction industry for over 40 years and as such we have developed a reputation for offering excellent quality products at competitive prices. Our products are very well established within the industry and we never compromise on customer service.Offering a wide range of products, from mould & formwork release oils, concrete curing agents, cementitious repair mortars, admixtures such as accelerators and plasticisers, along with waterproofing and cleaning products.We are an ISO9001 acredited company, and have WRAS approved products.
J.ONE CO.,LTD

South Korea

J.ONE is NO.1 in Concrete Mould Release Agents. Since established in 1981, the J.ONE, having settled down as a leading company to represent water-based mould release agents, is making the future of happy harmony between human beings and environments by developing eco-friendly chemical products to make our lives safe and healthy based on its accumulated technical capability. Less mold release agent used reduces the volume of the release agent by up to 90% (minimum of 50%) with cost saving as big as 75%. Higher quality than oil-based alternatives. Environment-friendly.
COLOR PAVE LTD

United Kingdom

A UK based manufacturer of chemicals for imprinted concrete. Overlay screeds, vertical render systems and acid stains. Imprinting mats, colour hardeners, integral colour, release agents, printable renders, sealers and re-sealers. Our Imprinted Concrete Chemicals include Colour Hardeners in 20 different colours. Release Agents as liquid or dry powder. Sealers in gloss or satin. Imprinting mats with over 50 designs. Manufactured in cobble, ashlar, stone, slate and wood patterns. We manufacture all our own chemicals and printable renders at our facilities. Based in Garstang, Lancashire and supplying the UK. We also sell a full range of driveway maintenance chemicals. These include block paving sealers, patio sealers, Imprinted concrete sealer and renovator. You can change these to include anti-slip agents, matting agents, coloured tints. We also sell training DVD’s with full instruction manuals. All types of driveway and patio surfaces enjoy clear concrete sealers. Most block paving, natural stone and concrete paving will benefit from waterproofing. This will also protect against dust, oil, dirt, grease, moss and weeds. Concrete sealers work to reduce the wear of your concrete. It stops water from entering the surface and stops the loss of the colour on the imprinted concrete. Wear and tear will be to the concrete sealer and not the concrete colour. The sealer will inhibit the growth of algae moss and weeds in block paving.