Universities - Import export

Selflubricating. Hardness 190220 HB. Note The guide bushes are radially and axially applicable. The bearing elements are maintenancefree and wearresistant. The graphite inserts provide lifelong lubrication. Preferably for travel speeds < 0.5 m/s. (Additional lubrication is recommended for extreme loading with a higher travel speeds). Temperature range Temporary temperature peaks up to ca. 200°C. Tolerances The bore for the bearings should correspond to ISO tolerance H7. The tolerance h6 to h7 is recommended for the shaft.

Highperformance polymer iglidur® G, iglidur® J or iglidur® X. Version iglidur® G grey; iglidur® J yellow; iglidur® X black Note Plastic highperformance polymer plain bearings. – maintenancefree – lubricantfree – corrosionresistant – resistant to dirt – high dimensional precision – high pressure resistance – good heat dissipation – very low creep tendencies – high mechanical damping – resistant to UV radiation. Assembly The bearings are designed for press fits in H7 bores. After pressing in, the ID of the bearing will be diameter D with the relative tolerance. The bearings are suitable for shafts with h tolerance (recommended min. h9).

Exceptionally wearresistant Dimensionally stable even at high temperatures Electrically insulating Frequency neutral

Housing igumid® G. Swivel ball iglidur® W300 Note The ability to pivot allows pillow block bearings to compensate for misalignment and possible shaft deflection. They are easy to install and suitable for the accomodation of rotating, oscillating and linear movements. igubal® pillow block bearings are maintenance free and conceived for dry running condition. Assembly These pillow block bearings are designed for mounting with 2 screws. The ID tolerance is E10. The matching shaft should have a tolerance of h6 to h9.

Universal joints with plain bearing can be swivelled by 45°. Max. transferable torque (Nm) at 150 rpm, operation angle α < 5°. * Bore depth is less than by DIN 808.

Product Descriptions 1) TOTAL 12 Types : BUSHING, CAP, ELBOW, NIPPLE, PLUG, REDUCING NIPPLE, REDUCING, SOCKET, REDUCING TEE, SOCKET, TEE, THREADED UNION, WELDING, UNION 2) TOTAL 2 SIZE Types <SIZE 1 : CAP, ELBOW, NIPPLE, PLUG, SOCKET, TEE, THREADED UNION, WELDING UNION - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"> <SIZE 2 : BUSHING, REDUCING NIPPLE, REDUCING SOCKET, REDUCING TEE - 3/4"x1/2", 1"x1/2", 1"x3/4", 1-1/4"x1/2", 1-1/4"x3/4", 1-1/4"x1", 1-1/2"x1/2", 1-1/2"x3/4", 1-1/2"x1", 1-1/2"x1-1/4", 2"x1/2", 2"x3/4", 2"x1", 2"x1-1/4", 2"x1-1/2"> 3) Applications - All stainless steel pipes, Hot and Cold water pipeline for industry - Fire water lines and waterworks, Oil pipelines 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10bar (Maximum operation pressue : 20bar) Features -Twice higher corrosion resistance applied by the solution heat treatment - Uniquely designed to avoid damages by slip of tools

Product Descriptions 1) Total 8 Types : ELBOW, TEE, SOCKET, END CAP, VALVE SOCKET, REDUCING SOCKET, REDUCING TEE, SADDLE SOCKET 2) Total 4 Size Types SIZE 1 : ELBOW, TEE, SOCKET, END CAP - 15, 20, 25, 32, 40, 50 SIZE 2 : REDUCING SOCKET, REDUCING TEE - : 20x15, 25x15, 25x20, 32x15, 32x20, 32x25, 40x15, 40x20, 40x25, 40x32, 50x15, 50x20, 50x25, 50x32, 50x40 SIZE 3 : SADDLE SOCKET - 15xPF3/4, 20xPF1, 25xPF11/4, 32xPF11/2, 40xPF2, 50xPF21/2 SIZE 4 : VALVE SOCKET - 15xPT1/2, 20xPT3/4, 25xPT1, 32xPT11/4, 40xPT11/2, 50xPT2 3) Applications - Stainless steel pipe (ASTM A269) - PVC-U, PFP, PSP and Spool pipes - Hot and Cold water for industries and waterworks 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 20 bar Features - Twice higher corrosion resistance applied by the solution heat treatment - Perfect leakage protection by applying uniquely designed cone packing - No pipe breakaway and leakage under condition of ground sink and quake

These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.

These precise slideways are used in e.g. machine, fixture and metrology equipment construction as well as in the optical and precision engineering industries. The central set screw M1 can be replaced by a clamping lever 06460. The stated permissible load values (F) are designed for dynamic loads with a service life of 1 million travel cycles. For static loads, 10 times the table value F is permitted. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. TI E = number of fastening holes E/M inside. TA E = number of fastening holes E/M outside. TI E1 = number of fastening holes E1/D1 inside. TA E1 = number of fastening holes E1/D1 outside.

Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages of the elastomer dog coupling Hub with expanding mandrel can be mounted axially Playfree with vibration absorption Excellent retaining force Excellent concentric accuracy Short design Easy to assemble Can be mounted axially on spigot side Electrical insulation Nominal torque up to 30 Nm On request Larger hub bore D. Higher nominal torque.

Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.

Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. - Frame Load Capacity (Max.) : 5kN - Main Load Cell : 5kN - Load Range : 50 (kgf) ◀(Up to 4-step conversion) - Column Type : Single Column - Load Accurancy : Less than ±0.5% - Crosshead Speed Range : 0.01 ~ 500mm/min - Load Resolution : 1/50,000 - Machine Controller : Touch Type Servo Controller(Position Control Type) - Test Category : Tensile, Tear, Peel, Compression, Bending, Repeat, etc. - Dimensions : 478× 650× 1375(H), 82kg - Main Power : AC 220V 2P, 50/60 - It is single column model that can be tested under 5kN. - UNITEST M1 is widely used for testing materials such as films, rubber, fibers, medical devices, biomaterial, and wires etc. - The main feature of the UNITEST M1 is that it requires a small footprint

This felt car seat organizer is a very convenient solution to prevent the mess in the car. The use of too much pocket, easy mounting on the seat also increases the usability. This product from Matador Useful Goods car seat organizer is a good choice for tablets, beverages, notebooks, magazines, pens, napkins and more. This product we produce and serve is very pocket-sized, with durable material structure and high quality seams, it is suitable for many vehicles/car types, brands. Material: Car seat organizer is produced from special nonwoven /felt material for many times and for long time use. It is reinforced with Velcro straps and can easily be removed and reused. We can call it felt vegan as material. It is more than 3mm thick. In addition, we use special tires and cords to hold the product more firmly on the seat. In addition, the material we use is vegan felt And it’s safe for kids. If requested, it can be removed immediately, it will not get dirty quickly.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

Automatic cutting system for all types of production with the option of choosing a 689 cm cutting head. This equipment allows you to speed up production cycles and achieve great cutting performances.

Huron MU5 Universal Milling Machine X stroke: 1300 mm Stroke Y: 700 mm Z stroke: 500 mm Spindle: SA40 Spindle speed: from 30 to 2066 rpm. Table surface: 1630 x 460 mm DRO Speed variator of the feeds Width: 2400 mm Depth: 2200 mm Total height 2300 mm Weight: approx. 4 T Various tooling

Universal liquid cleaner for antiscaling. Contains components that create a protective film on the metal surface and prevents it from early scale formation. Recommended consumption 25-50 ml/liter of water

Universal detergent for cleaning different types of surface

Universal dryer for 8 pairs of shoes, 8 items of clothing - mobile! Drying of jackets, shoes and gloves at the same time! Significantly reducing the level of sickness! The universal dryer with hot-air blower of the company SteurerAltach provides not only convincing quality with many well considered details but also a modern design and excellent stability. Dryer arms for air circulation up to 8 items of clothing at the same time Simple manual timer Reliable odour removal through ionisation (optional) Quick drying and warming by intensive hot air blown 40,000 operating hours guarantee for hot-air blower Efficient air circulation through turning valve Appropriate in many sizes and versions The universal dryer with hot-air blower is mobile by 4 castors (2 of it are braked) Equipment for: 8 pairs of shoes 8 items of clothing Technical data: Dimension in cm: 120 (W) x 198 (H) x 85 (D) Power in w: 1,65 Weight in kg: 90

Drying of jackets, shoes and gloves at the same time! Significantly reducing the level of sickness! The universal dryer with hot-air blower of the company SteurerAltach provides not only convincing quality with many well considered details but also a modern design and excellent stability. Dryer arms for air circulation up to 8 items of clothing at the same time Simple manual timer Reliable odour removal through ionisation (optional) Quick drying and warming by intensive hot air blown 40,000 operating hours guarantee for hot-air blower Efficient air circulation through turning valve Appropriate in many sizes and versions Equipment for: 8 pairs of shoes 8 items of clothing Technical data: Dimension in cm: 120 (W) x 198 (H) x 85 (D) Power in w: 1,65 Weight in kg: 90 Wall-mounted

Drying of jackets, shoes and gloves at the same time! Significantly reducing the level of sickness! The universal dryer with hot-air blower of the company SteurerAltach provides not only convincing quality with many well considered details but also a modern design and excellent stability. Dryer arms for air circulation up to 4 items of clothing at the same time Simple manual timer Reliable odour removal through ionisation (optional) Quick drying and warming by intensive hot air blown 40,000 operating hours guarantee for hot-air blower Efficient air circulation through turning valve Appropriate in many sizes and versions Equipment for: 4 pairs of shoes 4 items of clothing Technical data: Dimension in cm: 60 (W) x 198 (H) x 85 (D) Power in w: 1,65 Weight in kg: 50 Wall-mounted

Grain moisture meter for maize, rye, Triticale, wheat, durum wheat, spelt, barley, oats, rape, pumpkin seeds, field peas, soybeans, scarlet runner beans, horse beans, sunflower seeds, Jatropha, peeled and unpeeled raw coffee, roast and ground coffee, peeled, unpeeled and brown rice, poppy seeds, millet, sorghum millet, peeled buckwheat; further species on request With reference calibration curve and customer calibration function The water content can immediately be read off the large, well-lit display of the universal grain moisture meter and saved, edited or printed out via the integrated datalog if required. - no time-consuming preparation of samples necessary - non-destructive measuring technique - whole grain moisture meter