Ball joints - Import export

1 x C-Frame press  1 x C-Frame schroef  3 x receiver tubes;  2-3/4”x3  2-1/4”x 2-1/2”  1-3/4”x2”  Maximum pressure range; 125mm  Suitable for various sizes of cars, light trucks and SUVs

1 x tie rod spreader with 11/16” (17.5mm) wedge opening  1 x ball joint separator with 15/16” (23.8mm) jaw opening,  1 x pitman arm wedge with 1-1/8” (28.6mm) opening,  1 x 7-3/4" (196.9mm) Kunrled striking handle for use with conventional hammers  1 x 6-3/4" (171.5mm) adapter handle for use with air hammer

Mouth opening: 22 – 18mm  Mouth opening: 19mm  Mouth opening: 19.5mm

Angled Ball Joints - China Competitive Supplier Standards:DIN 71802 DIN 71805 Material: Steel or 1.4305 stainless steel. Stainless steel versions have Neoprene seals. Version: Trivalent passivated. Stainless steel version bright. Note: Protected against dust, dirt, water spray and vapour. Applicable temperature range from -30 °C to +110 °C. On request: Axial joints with greater extraction force and left-hand thread available.

We outsource End connectors for gas spring struts and transmission rods. Standard: DIN 71802 / DIN 71803/ DIN 71805 Normal Supply M6,M8,M10 ball joints, and custom order for M5,M12. Inner locking ring type & Outer Circlips types are available. Welcome contact us for discuss it, we can offer very competitive price.

Metal Ball Sockets Item: Metal Ball Socket Standard: Customized according to customer’s drawing Material: Carbon Steel Q235 / Stainless Steel 304 / 316 Technics: Cold Forging Then CNC Turning, Drilling Finished by : Black zinc plated, Blackened Application: Gas Springs, Pneumatic & Hydraulic Damper Struts End Joints China Pneumatic & Hydraulic Cylinder End Joints Source Factory Custom Produce Metal Ball Sockets With High Quality & Low Price. We are very glad to receive your inquiry.

Customized connection parts for gas springs produced according to your request

All sizes available also in stainless steel. We have a huge stock on these, we offer the most competitive prices on market

Ball Seats For Angle Joints Item: Ball Seats Standard: Din 71805 Material: Carbon Steel / Stainless Steel 304 / 316 Technics: Cold Forging Then CNC Turning, Drilling Finished by : Zinc plated, Nickel Plated, Blackened Available Application: Gaslift, Pneumatic & Hydraulic Cylinder End Joints China Pneumatic & Hydraulic Cylinder End Joints Source Factory Produce DIN71805 Ball Seats For Angle Joints With High Quality & Low Price. We are very glad to receive your inquiry.

Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium

Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls: Oscillatory robolink® joint - optional with angle sensors material: robolink® joint: Fine polyamide PA 2200 Screws: stainless steel VA Ropes:Dyneema Bearing: Alu HC(alternative iglidur® J) Balls:

1700 ml

Ball joint monitor mounting Even more degrees of freedom through a ball joint socket Feature: max. load capacity 10 kg (static) 60° free swivelling reducing bushes available (round 20 and 25mm, square 20mm)

Four new models for even more flexibility The product family of aluminium Solid Clamp tube connectors has a new addition: size 30 base clamps, sleeve clamps and hinge clamps are now also available for delivery with integrated ball joint. A sleeve clamp with double ball also adds to the range. The ball joints are designed for loads of up to 40 Nm (static). Connected applications can be pivoted freely by 60° and rotated freely by 360°. This way, the new tube connectors with ball joint provide a significantly higher degree of freedom for construction than conventional hinged connectors. An appropriate surface coating on the ball joint makes for a high-strength clamping connection. The clamps feature a universal connecting plate for flexible integration. Features: can be combined with size 30 tube connectors the clamps feature a universal connecting plate (KGFS 30, KGM 30, KGGPZ 30) for flexible integration high-strength clamping thanks to special finishes

1000 ml

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510012

Category Hydraulic systems, valves and components / Hydraulic cylinders / Accessories / Rod ends for rod Product number supplier 45510010

Stainless steel pipe connectors and ball joints are used for quick dismantling of two pipes. The ball joints offer the additional advantage of attaching the pipes at a special angle.

Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Note: Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot slipping. For matching threaded spindles see 27810. For matching ball joints see 27811.

Displacement sensors models 8710 and 8711 with resistance tracks made of conductive plastic material are designed for a direct and accurate measuring of mechanical displacements. A special ball joint coupling is mountable on both ends of the driving rod. Because of this the sensor may be used free of clearance or lateral forces also with angular or parallel misalignment between sensor and measuring device. A special multi-fingered slider provides a good electrical contact also at high adjustment speeds or vibrations. Areas of application are: —Electromagnets —Switch and button deflections —Pneumatic cylinders —Press-fits (longitudinal press-fits) —Hydraulic cylinders —Measurements of deformation and bending —Length tolerances —Feeding paths Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system.

Potentiometric displacement sensors are used for direct, precise measurement of mechanical displacements. The mechanical parts of the measuring equipment must be set-up in such a way that the sliding shaft can move without play or lateral forces. A special multi-finger slider ensures good contact even when the adjustment speed is high or in the presence of vibration. With its housing diameter of only 12.7 mm, the model 8709 is also suitable for highly compact structures. The movable fastening clamps allow the user variable options for attaching the sensor without complication. Optionally available adaptations, such as flange and ball joint versions, extend and complement the range of possible applications. Typical fields of application include: Measuring the stroke on riveting machines Measuring insertion distances Offset measurements on bearings Spring travel measurements on axes Measurements of the movement of hoisting platforms Length measurements on pipe bending machines

Product Descriptions 1) TOTAL 20 Types One-Piece Hex Welding Ball Valve, One-Piece Hex Ball Valve (Threaded +Welding), One-Piece Ball Valve Two-Piece Ball Valve(10K), Two-Piece Ball Valve(20K), Two-Piece Ball Valve(Steam) Two-Piece Ball Valve (Long Stem Neck), Two-Piece Ball Valve (Full Bore), Camlock Quick Ball Valve Angle Ball Valve, Two-Piece Sanitary Ball Valve, Three-Piece Ball Valve (Threaded Type) Three-Piece Ball Valve(Welding Type), Three-Piece FxW Ball Valve, Three-Way Ball Valve(L Type, T TYPE) HI-DR Ball Valve, Press Joint Ball Valve(Long Stem Neck), Gate Valve, Swing Check Valve, Strainer 2) Size : 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 3" 3) Applications - All stainless steel pipes, Sanitary valve for food industries - Hot and Cold water for industries and waterworks, Oil pipelines (Neet to change the gasket) 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10 bar, 20 bar, 30 bar

Lateral expansion joints absorb movements vertical to the bracing plane. The reaction forces caused by the internal pressure are absorbed by the joint mounting. Under internal pressure expansion joints generated pressure reaction forces. For a better understanding, the following considerations with different diamaters, pressures and resulting from it the forces: DN 150 -> 25 bar ~ 80 kN = 8 t DN 300 -> 10 bar ~ 100 kN = 10 t DN 1000 -> 1.5 bar ~ 130 kN = 13 t Due to high forces, movements in pipelines of higher nominal size and higher pressure can only be absorbed with braced expansion joints. Applying braced expansion joints pressure stress can be absorbed, while fixed bearings can be dimensioned smaller. In case a 3-hinge-system cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed. Types of design for lateral expansion joints: ball bearing types with tie rods for all-side movements cross hinged types for...

1x Ball Joint Separator  1x Tie Rod and Ball joint remover  1x Conical Pitman arm puller  1x Pitman Arm and tie rod end puller  1x Pitman Arm puller