Electrical components - Import export

Useful cooling output 1,500 W. The cooling unit may be attached to the enclosure in 3 positions (external, partial internal and full internal mounting). The energy-efficient wall-mounted cooling unit Blue e+ Outdoor can be used worldwide, thanks to its multi-voltage capability, and is suitable for use with Toptec project solutions, for example Average 75% energy savings thanks to speed-regulated components and heat pipe technology Longer service life of the components inside the enclosure and the cooling unit due to component-friendly cooling Intuitive operation due to touch display and intelligent interfaces SK Blue e+ cooling unit, wall-mounted, outdoor, 1.6 kW, 110 – 240 V, 1~, 380 – 480 V, 3~, 50 – 60 Hz, aluminium, WHD: 400 x 950 x 310 mm

One or two infeeds, with on or three phases; redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system. The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected. DK PSM busbar, 7-way, 3~, 16 A, Infeed: 1, For H: 2000 mm

Compact power distributor with energy measurement per phase and/or infeed. Rapid overview of the power requirements of a complete IT rack. Distribution output up to 22 kW Energy measurement per phase, i.e. output requirement of an entire IT rack. Thanks to the compact PDU, any IT rack is easily equipped with a professional power distribution system. The compact design allows simple assembly – with the TS IT rack, assembly is even tool-free. The OLED display shows the energy consumption. An integral Web server offers a direct network connection with extensive user administration functions. Redundant power is supplied from all phases and additionally via an existing Power-over-Ethernet network. The PDU offers extensive monitoring functions. Measurement accuracy of 1% guarantees a high level of reliability. DK PDU international, metered version, Energy measurement per phase, WLD: 44x1395x62 mm, 24xC13, 6xC19, black, CEE, 3~, 16 A

To cover outgoing sections with NH slimline fuse-switch disconnectors so that they are safe from finger contact. To cover outgoing sections with NH slimline fuse-switch disconnectors and Maxi-PLS/Flat-PLS busbar system in the rear enclosure section so that they are safe from finger contact (IP 2X). SV Contact hazard protection cover, for fuse-switch disconnector section, for TS (W: 1000 mm)

For flat copper bars 40/60/80/100/120 x 10 mm SV Busbar support, 3-pole, 185 mm bar centre distance, for busbar WH: 40x10/60-120x10 mm

For connecting round conductors and laminated copper bars SV Conductor connection clamp, 1-4 mm², for bar thickness 5 mm

For flat copper bars up to 800 A.

Intel 186 / 286 / 386 / 486 / Pentium / Pentium Pro / i860 / i960 Cyrix 486 / 586 / MIIIBM 486 / 586 / 686 Motorola 68000 / 88000 series NEC Toshiba MIPS series: R4000 / R8000 / R10000 / R12000 1-Gold Top Cpu… 2-Gold Top&Bottom Cpu. 3-Intel 186/286/386/486/Pentium/Pentium Pro/i860/960/… 4-Cyrix486/586/MIIIBM486/586/686/. 5-RAM (memory) Usage: For electrical industries Suitable to manufacture numerous electrical components, cables, cans, etc 1. Motherboard And other Computer Scrap 2. Untested condition 3. For recycling 4. Stock available PS / ABS bales scrap waste from electric and electronic devices (TV SHELL-CASE, COMPUTERS, etc.) CAN LOAD IN A 1X40’HC CONTAINER APPROX. 22 TONS (-+10%) We can sell you the following scrap: Computer Mother Boards Computer Finger Boards Computer Memory Computer Processors Computer Power Supplies Computer Hard Disks Computer Floppy Drives Computer CD Rom Computer Cases Computer Wires Computer Keypads Computer Mouse

K2 AKRA - trusted by millions of worldwide end-users engine cleaner for cleaning engines and heavily soiled car parts. This product is dedicated to remove heavy sludge, streaks from the operating fluids, dried dirt and volatile rust. Perfectly cleans engine and other vehicle components but also tools, industrial equipment and surfaces. Specially designed formulation of active nanoparticles together with corrosion inhibitors - crashing down soiling of oil, grease thus protecting cleaning process of engine compartment - ensures the very best cleaning result. K2 AKRA is safe on plastic, rubber, both painted and chromed parts. It does not contain any solvents or petroleum derivates. Biodegradable within 28 days. Engine wash: Ensure that the engine is cold. Secure the components of electric system. Sprinkle the soiled surfaces with K2 AKRA. Wait for 30-45 seconds.

Modern electronics related industries are obliged to manage an "ESD program" as an integral but logical part of a complete quality program. In fact, those who do not have an active ESD program endanger themselves and their customers. AntiStatic-ESD-Solutions is your partner in this process to implement the right procedures in and for your company. The international ESD standards IEC 61340-5-1 and ANSI S2020 status: ESD training is essential and must be part of employee introduction courses. Relevant structured ESD training or courses must be provided for all personnel who handle, procure, design, specify or determine ESDS aspect in any way, including supervisors and managers.

ESD Pre-Audits performed by AES are a complete screening of your ESD safe workspace based on the guidelines in the ESD standards IEC 61340-5-1 / 5-2. These detailed ESD Audit reports are an accurate finger on the pulse and give you a clear understanding of your ESD Protected Area (Conformities, weaknesses, shortcomings, Mayors and Minors). AntiStatic-ESD-Solutions assists you and carries out ESD workspace assessment of your EPA (ESD Protected Area) Protected zone that is an important component as internal quality control and must comply with ESD audits.

Static Electricity is a major problem that has seriois impact on product quality, throughput and worker safety in many industries. In electronics and media, ESD Electrostatic Discharge affects semiconductor manufacturing, electronics assembly, flat panel display & hard disk drive production, and film processing. In industrial, food, telecom, textile, packaging, chemical, medical and pharmaceutical manufacturing, static electricity creates problems with cling and particulates such as in the processing of paper, fabrics, plastics, powders and other materials.

AES (AntiStatic-ESD-Solutions bvba) * ESD prevention clearly distinguish the difference between an ESD work shoe and an ESD Safety Shoe. ESD shoes, have an electrostatically dissipative conductive shoe sole, popularly known as antistatic shoes (which is not the same, incorrectly). Safety Work Shoes are classed as ESD safe shoes when the resistance value of the system person-shoe-floor is below 3,5 x 10^7 resp. 35 MOhm according to EN 61340-5-1.

Due to the fact professional cleaning companies have little or no ESD knowledge too often insufficient attention is paid to the maintenance and cleaning of ESD safe areas such as ESD floors, ESD workbench surfaces and others. You have invested in expensive conductive and dissipative materials for a reason, to protect your Static sensitive products and devices. We need to make sure that these continue to function, divert static charges to ground and may never be interrupted by the use of erroneous Not ESD safe detergents and vacuum cleaners.

ESD Chairs are Electrostatic Dissipative, called Static Control Chairs, made to divert static charge to earth to reduce static charge generated by sitting and to discharge it safely through the floor grounds. ESD chairs are necessary for working with electronic components. Static electricity also poses a lot of problems at the office. Provided implementing a total concept, ESD Chair, conductive floor mat and a controlled connection to the earth are an ideal solution for administrative office spaces that suffer from static electricity.

ESD garment and ESD clothing must be certified by reputable institutes in compliance with ESD-Standard IEC 61340-4-9: 2016 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments ESD DIN EN 61340-5-1:2008 according to European standards and ANSI-S2020 according to USA standards.

Most ESD workbenches of Elicon Knurr (Vertiv) are adjustable in height, even automatically adjustable worktables are part of our complete range ESD furniture.. Designed and built to high specifications, AntiStatic ESD Solutions® worktables and other ESD furnishings are used in a wide variety of technical and manufacturing environments, including: Industrial, Commercial, Military, Government, Medical, Airspace..