Cement mortars - Import export

INTOIDRO ELS: Bi-component cementitious elastic membrane based on cementitious binders and special elastic polymers, anti aggressive and abrasion resistant for mineral waterproofings. INTOIDRO MONO: Cementitious elastic fibre-reinforced mono-component mortar based on cementitious binders and special acrylic polymers highly elastic, antiaggressive and resistant to abrasion for mineral waterproofings.

The plaster support grid is used as a reinforcement for cement mortars, coatings, plasters, etc.

AGRANA starch ethers are used in gypsum, slaked lime, cement and slaked cement to rapidly and reliably ensure the desired product consistency.

25 KG MEGAFIX TILE ADHESIVE

Additional concrete reinforcement of French origin, a product specially designed to improve the properties of cement mortars. The addition of ANTIGREX to the cement mortar offers absolute tightness. Enhances their adhesion to any form of substrate. Allows the construction of very thin coatings, reduces the ratio of water to cement for equivalent workability. It does not allow the formation of dust and increases the resistance to abrasion. Increases flexural strength and prevents cracks from expanding and contracting. Increases the resistance to the effect of hydrochloric acid and reduces shrinkage in the setting of cement. ANTIGREX creates waterproof coatings on walls, basements, tanks, etc. It is suitable for the construction of industrial floors in warehouses, factories, etc. It helps to smooth the floor surface before laying tiles, slabs. It is suitable for repairing damaged concrete parts (eg stairs).

FIXER IBRIDO is an aqueous emulsion of special resins and ointment polyurethane, used to protect and highlight the surface of floors and walls from natural stones and cement mortars. Gives the above surfaces, as the case may be, a satin look, as well as hardness, while making them easier to clean daily. It is easy to apply and provides a glow of high aesthetics.

Hybrid single-component polyurethane-based crystallization varnish for FIXER FIN, FIXER FILL cement mortars and FIXER FIX plasters for every interior and exterior surface. Its composition with acrylic and polyurethane resins of new technology, gives it increased resistance to both mechanical stress and external factors (UV radiation and humidity). Recommended for: wall, floor, kitchen counters, bathrooms, wc. • For interior and exterior use • For forced cement • Crystallization Varnish • Hybrid Technology • Matte – Satin • For natural stones

HEAT PROOF is a special heat-absorbing admixture for insulators of all kinds. Acrylic insulators, elastomers and hybrids of all categories and all qualities. This material mixes with all of the above and improves their performance. It gives the material greater hardening, durability, spreading and most importantly traps the solar temperature by improving the specifications of each insulator. Specially treated with refractory properties and great whiteness. Creates after mixing a slightly rough surface with non-slip properties. It has very high adhesion to almost all smooth surfaces, on which, without pre-treatment, it is practically impossible to coat other materials. The surface on which it is applied acquires a rough texture, which resembles high-strength cement mortar. The ratio is ready for every 10Lt of insulation product and no dilution is needed. Only very good agitation to disperse and be fully assimilated.

Thermal insulation concrete is used for insulation of thermal plants, and can also be a replacement for thermal insulation bricks. The hydraulic connection ensures a stable lining. It comes in extra strong plastic bags, on a pallet, wrapped in shrink wrap

Refractory shotcrete concrete is used in thermal power plants and heating plants: fireboxes and recirculation channel B29 frames and covers of openings, chimneys, insulation. In metallurgy is used for making furnace lining parts, liquid metal baths, casting systems, and casting pots It can be used also in various household stoves ( fireplaces, chimneys, fireboxes)

Refractory concrete ( RC- cast ) is used in thermal power plants and heating plants: fireboxes and recirculation channel B29 frames and covers of openings, chimneys, insulation. In metallurgy is used for making furnace lining parts, liquid metal baths, and casting systems. It can be used also in various stoves in the household for fireplaces, chimneys, and fireboxes. It comes in extra strong plastic bags, on a pallet, wrapped in shrink wrap

Kerater is used for patching the grill zone of dome furnaces, filling joints between bricks in electric kilns, and for patching industrial kilns. It can still be used for patching gas furnaces or liquid fuels and for coating foundry models for micro casting.

Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks. Suitable for the consolidation of cementitious screets of low consistency. Packaging: Tanica 5-20 LT Color: Colourless Usage: Indoor/outdoor Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent Yield: 8/12 sqm for LT, depending on the absorption of the support

Industry floors, concrete block-systems, plant pots, bicycle paths, clinkers, tiles, flags, joint wet mortar, cement adhesive, mineral paints,… NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IRON OXIDES: yellow, red, brown, black DRAGON PIGMENTS: blue, green, grey CHROME OXIDE GREEN COBALTOXIDE BLUE CARBON- or PITCH-BLACK (limited) TITANIUM DIOXIDE WHITE A pigment is a substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier. The colouring capacity of the pigment depends on the fineness of the particles composing the pigment. In general we can say that the finer the particles are, the higher the colouring capacity of the pigment will be. A pigment is only suitable for certain applications. The pigment shouldn’t react with the carrier.

Cement based joint filler - Please contact us additional information.

"The LPS-EMK-40 Tank-Integrated Injection Machine is a product offering flexibility in the high-pressure horizontal-vertical pumping and injection of dense, low-viscosity, granular mixtures such as fluid calcium-based construction chemicals, cement, plaster, ready-mix, mortar, and grout. Maximum aggregate size: 0 - 4 mm. It caters to various tasks like filling in rock bolts, anchors, and rock cracks with cement grout for structures like bridges, buildings, and dams. It also provides successful solutions for pumping all kinds of mortar, clay, mud, as well as transporting any fluid/semi-fluid materials horizontally and vertically. The machine features an integrated mixer vessel with water input, allowing for easy preparation of mixtures in desired proportions or the use of pre-prepared mixtures. The material in the vessel is conveyed to the application point through a hose. By connecting adaptors, the machine can work with various nozzle diameters and characteristics as required.

The LPS-EMK-80 Dual Boiler Injection Machine is a product suitable for high-pressure horizontal-vertical pumping and injection tasks involving high-density, low-fluidity value, and granular mixtures like calcium-based construction chemicals, cement, plaster, ready-mix mortar, bran, and slurries. Its maximum aggregate size is 0 - 2 mm. It offers successful solutions for a range of applications such as filling foundations of structures like bridges, buildings, dams, filling cement slurries into rock bolts, anchors, and fissures, as well as pumping any kind of mortar, clay, mud, and horizontal-vertical transport of various fluid or semi-fluid materials. The machine is equipped with an integrated mixer boiler and a water inlet, facilitating the easy preparation of mixtures in desired ratios, or ready-made mixtures can also be used. The material in the boiler is conveyed to the application point via a hose.

"The LPS-RSM-500 is a concrete and refractory spraying machine designed for lightweight and precise coating applications, offering low operational costs. With various motor models available, the machine has the capability to spray lightweight shotcrete concretes, refractory concretes, or mixtures prepared for different purposes with aggregate sizes smaller than 12mm. Its enhanced rotor geometry, high-strength steel plates, and meticulously crafted surface plates made of natural rubber ensure dust-free operation, leading to savings in raw materials, labor, electricity, and air. The rotor lubrication system prevents wear on rubber and steel surfaces. Electrical safety is ensured with a waterproof electrical panel. The machine is equipped with a waterproof electrical panel for electrical safety."

POWER SD 5 READY PLASTERING MACHINE Technical Specifications Machine Type: POWER SD 5 High quality mixing Easily disassembled and transported High quality electrical panel application 2 years warranty period – Delivery export value package type. Technical Data Power Supply 380 V - 50 Hz Motor Power 5.5 kW Compressor Capacity 250 liters/min - 5.5 bar Carrying Capacity * 5-40 liters/min (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.) Water pump 50 liters/min - 0.75kW Transport Distance Horizontal * 40 meters (Standard – if needed this will be long - option) Transport Distance Vertical * 30 meters (Standard – if needed this will be long - option) Reservoir Volume 130 liters Maximum Weight 285 kg

special cements for oil drilling operations

LPS EMK 60 PRO is a machine designed for various applications such as rough plastering works, thermal insulation mortar, perlite, cement mortar, coating materials, and other spraying, injection, and transportation processes. Its technological structure significantly enhances application efficiency and quality. The machine's design features minimized dimensions, facilitating easy transport in the field. The accessory structure is minimized and manufactured using top-tier technology. With its accessories designed for long-term durability under suitable operating conditions, it effectively minimizes material costs to the most optimal levels.

"The LPS-EMK-20 Vessel Injection Machine is a product offering flexibility in the high-pressure horizontal-vertical pumping and injection of dense, low-viscosity, granular mixtures such as fluid calcium-based construction chemicals, cement, plaster, ready-mix, mortar, and grout. It caters to various tasks like filling in rock bolts and rock cracks with cement grout for structures like bridges, buildings, and dams. It also provides successful solutions for pumping all kinds of mortar, clay, and mud, as well as transporting any fluid/semi-fluid materials horizontally and vertically. The machine features an integrated mixer vessel with water input, allowing for easy preparation of mixtures in desired proportions or the use of pre-prepared mixtures. The material in the vessel is conveyed to the application point through a hose. By connecting adaptors, the machine can work with various nozzle diameters and characteristics as required.

A cement-based plastering mortar in appropriate particle size, which has high adhesive strength , is easy to process , specially designed for exteriors and can be applied both manually and by machine to bricks , primed exposed concrete,pumice concrete,briquette walls and ceilings.

a cement-based plastering mortar in fine particle size, which has high adhesive strength. It is easy to process , especially designed for interiors and can be applied both manually and by machine to bricks to bricks, primed exposed concrete, pumice concrete, briquette walls and ceilings.

Equipment provided electronic weighing with automatic calibration. To install the empty packages to the filling of the pipe and its attachment clamping device requires human intervention. Filling occurs in stages: first a powerful stream, then thinner for correct dosage. Packing in valve bags over after filling them in strict accordance with the specified parameters. Dosing mechanism overlaps pipe valve, clamp device automatically resets to the receiving transport packaging tape. Filling machine provides highly accurate formation of the mass dose valve bags. The weight of the dose, dosing regimens, and other variables are set by the operator from the keyboard of the control. Easy to use and intuitive management interface, ease of installation and configuration. Filling machine calculates the total amount of product that passes through it and may make that information on RS 485 to a computer or programmable logic controller.

KAROFiX® SUPER FLEX Cement-Based High Performance Elastic Adhesive Mortar APPLICATION FIELD Provides superior performance in fixing of coating materials such as ceramic, granite, porcelain ceramic, marble, travertine etc. at all sizes on horizontal and vertical surfaces for interior and exterior areas. It may be applied on dry and wet areas (baths, swimming pools, water tanks, terrace, etc.), cement-based plasters and concrete surfaces, floorings with floor heating system, floors exposed to high level of traffic, areas with thermal shock risk, cold storage rooms, floors exposed to vibration, and applications of ceramics over ceramics.