Compressed air systems and equipment - Import export

Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.

Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.

With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.

"It is highly crucial to have clean and dry air in the system to have profitable and efficient manufacturing worldwide. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers remove water vapor from compressed air, stop corrosion, and inhibit the growth of micro-organisms in critical applications. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers supply high-quality dry air which has -40 °C dew point or optionally -70 °C dew point to the system with affordable prices and reliable way. In that way, the production machine has a longer life, minimum maintenance costs, and processed product is produced in a healthy and safe way. The new vacuum purge technology decreased air loss during the regeneration process and make the production more cost-efficient way."

"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."

"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"

"Mikropor is proud to announce that the new MK-DS series explicitly prevails over any other type of refrigerated air dryer by achieving everyone’s goal to lower energy costs. The MK-DS Series, with a specially designed heat exchanger and digital scroll compressor, provides unrivalled energy efficiency in a refrigerated air dryer. The challenge of maintaining a stable dewpoint and saving energy can be overcome with this latest technological development. Combining Mikropor’s expertly designed heat exchanger, leading filtration technology and digital scroll compression in Mikropor’s MK-DS dryers provides the ultimate energy efficiency solution for compressed air systems with varying levels of air demand."

"Most compressor manufacturers do not use an aftercooler on their piston type compressors. Therefore compressed air exits the compressor at about 100°C temperature. Mikropor's High Temperature Dryer has an aftercooler to reduce the inlet temperature."

Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

BF HP filters are designed for protection of the downstream compressed air system and equipment against defects and other failures in high pressure applications. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 25 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

WFIT welded stainless steel filters with threaded connections are designed for protection of the downstream compressed air system and equipment against defects and other failures. They are used for filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing.Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

BF filters are designed for protection of the downstream compressed air system and equipment against defects and other failures. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

High-quality compressed air is very important for many industries, it has a vital role in breathing air applications. Mikropor breathing air purifiers are designed to eliminate hazardous substances in the air conforming to related standards. (Mikropor breathing air purifiers are designed to protection against a range of contaminants that may be present in a compressed air fed breathing air system.) The atmospheric air that we breathe is composed of approximately 78 percent nitrogen, 21 percent oxygen, 1 percent argon, and many other trace components. Standards including the allowable limits of the specification for each component for breathing air. Mikropor production breathing air purifiers comply with international standards.

APU Series Air Pressurization Units & Filtration Units are widely used in industrial plants where needed such a precise air quality. These units are fully customizable upon the needs and the requirements of the projects. Absorbing residual dust, harmful gases and odors, APU Series are perfect to be used in such environments where human health is of high importance, as well as for equipment protection.

You might have a malfunction in your air conditioning system and the system has not been designed with any redundancy scenario. Or, your current setup does not satisfy you from efficiency point of view. Besides, you might only need air conditioning during certain peak times of the year. You might also be in the rental business for cooling equipment. In this case, MAC Series Mobile Cooling Units are the perfect solution for you. With its plug and play feature, you can start up and run your operation instantly.

Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

The cooler is made of stainless steel and the evaporator housing is insulated from PE and PUR. Exchangers and piping are coated against corrosion. The cooler is suitable for outdoor installation.

1200i PRO is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 1200 m3/h. 1200i PRO combines the most advanced 4-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 1200i PRO is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

720i EDGE is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 720 m3/h. 720i EDGE combines the most advanced 5-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 720i EDGE is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

The active FE SYSTEM electrostatic filters are unique in their energy efficiency and the ability to kill off harmful particles (as opposed to only collecting the particles). Due to the standard size of the FE SYSYEM, it can be retrofitted into existing. Used in ventilation systems, particularly in the air-conditioning sector, does not require changes in the construction and dimensional characteristics of the plant. Energy savings: The FE SYSTEM has been given an A+ rated energy rating (Eurovent), (compared to a C energy rating for traditional pocket filter) and is certified to the highest standards of air quality - ISO 16890 and many more. This improved energy efficiency has yielded up 30% electricity savings. Cutting-edge technology that creates systems that offer the highest level of air filtration and air quality and significantly reduce energy consumption through the use of components that provide world-class, certified efficiency levels and eliminate disposal of used filters.

Diffusion device for dry nebulization of disinfectants. Converts the liquid disinfectant into a dry mist without leaving any residue. Nebulization through the Venturi effect Broad-spectrum of activity Uniform distribution of the particles in the room Slow and even precipitation ensures comprehensive, reliable disinfection Can also be used when there are electronic devices in the room Suitable for all surfaces Even hard-to-reach objects such as B. cables are reliably disinfected Room volume adjustable from 10 to 1000m³ Automatic shutdown after the disinfection process is complete No pre or post-treatment of the room necessary

The EnviroKlenz® Air System Plus is the premier air-purifying solution. Its air filtration process includes the EnviroKlenz® Air cartridge, which contains the EnviroKlenz® patented earth-mineral technology, a medical-grade H13 HEPA filter, and UVC bulbs to provide additional germicidal irradiation and internal system cleaning.

The Potok® air purifiers work on the basis of ultraviolet technologies which disinfect air by 99.9%. Recommended room size up to 20 m2, room height - 2.4 m. Protects against viruses: makes the air in your home and office safe. The air is disinfected inside the device using ultraviolet lamp radiation. Our antibacterial UV lamps' special glass and design features provide zero ozone emission, making it safe to use the air purifiers for people, animals, and plants. Filter of a F5-Class: captures particles from 1 micron, including allergens, pollen, spores of fungi and mold, bacteria, dust and animal hair We are a member of the International Ultraviolet Association (IUVA) and actively participate in its activities, research and developments. The production capacity ensures a daily production rate of 3000 air purifiers.

The Potok® air purifiers work on the basis of ultraviolet technologies which disinfect air by 99.9%. Recommended room size up to 10 m2, room height - 2.4 m. Protects against viruses: makes the air in your home and office safe. The air is disinfected inside the device using ultraviolet lamp radiation. Our antibacterial UV lamps' special glass and design features provide zero ozone emission, making it safe to use the air purifiers for people, animals, and plants. Filter of a F5-Class: captures particles from 1 micron, including allergens, pollen, spores of fungi and mold, bacteria, dust and animal hair We are a member of the International Ultraviolet Association (IUVA) and actively participate in its activities, research and developments. The production capacity ensures a daily production rate of 3000 air purifiers.

The Potok® air purifiers work on the basis of ultraviolet technologies which disinfect air by 99.9%. Recommended room size up to 185 m2, room height - 2.4 m. Protects against viruses: makes the air in your home and office safe. The air is disinfected inside the device using ultraviolet lamp radiation. Our antibacterial UV lamps' special glass and design features provide zero ozone emission, making it safe to use the air purifiers for people, animals, and plants. Filter of a F5-Class: captures particles from 1 micron, including allergens, pollen, spores of fungi and mold, bacteria, dust and animal hair We are a member of the International Ultraviolet Association (IUVA) and actively participate in its activities, research and developments. The production capacity ensures a daily production rate of 3000 air purifiers.

The AirExchange® 1500-T is one of the most powerful air cleaning systems on the market and has a timeless design. The device is equipped with a touch-control operating panel and a clear display that shows real-time measurements such as the CO2-level, Particulate matter (PM2.5), humidity and temperature. In addition, you can control the device from a distance with our convenient application, Equipped with an arsenal of defense mechanisms, the AirExchange® 1500-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 1500-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 1500m³/ hour and is suitable for room sizes up to 200m². The system uses a double filter with a washable mesh filter,antibacterial filter, microbiological HEPA H14 filter, carbon filter and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.