Computer networks - Import export

Networking services involve designing, implementing, and managing computer networks that facilitate communication and data transfer. This includes network setup, security, optimization, troubleshooting, and wireless networking.

In this course we will make you an expert in Asterisk IP telephony — a flexible tool with free open source. If you know how to work with Asterisk, the cost of your services in the labor market is higher than that of a regular administrator.

1) Linux, Windows & BSD servers systems administration......... 2) Enterprise IT support......... 3) 24/7 Systems Monitoring......... 4) Elimination of hardware and software conflicts......... 5) Remote Troubleshooting and fixes.........6) Cloud and bare metal servers installation and maintenance......... 7)Regular check-ups on your systems and servers......... 8) Network Management......... 9) Installing upgrades, updates and new software......... 10) Performance tuning for optimized results......... 11) Checking computers & servers for computer viruses and treating them......... 12) Consultations on information security and information protection......... 13) Creation of backup copies of critical data......... 14) IT security and video surveillance systems management and setup......... 15) Corporate telephony systems management and setup

Our office container sets are specially designed to be used as a temporary administrative work area for staff, regardless of construction site conditions. Our prefabricated container can be dismantled in sets, with an external height of 2.60 m and a standard 6.00 × 2.50 m. Office containers can be customized and dimensioned to include the following options air conditioning, furniture, computer network and telephone, home automation, guard (guardrail), high floor. Prefab. Office containers (construction site office) are delivered as a set disassembled. 10 prefabricated office of 15 m2, with one door and two windows, fully electrically equipped, are shipped with only one 40foot sea container. Our office containers can be joined (assembled or stacked) to form prefabricated modular buildings. Our office container sets are specially designed to be used as a temporary administrative work area for staff, regardless of construction site conditions. Our prefabricated container

The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems

The SN74LVC1G04DBVR is a single inverter gate from Texas Instruments. It is a low-voltage CMOS device that is designed for 1.65-V to 5.5-V VCC operation. The device is housed in a SOT-23-5 package and is suitable for use in a wide range of applications. Features: • Low-voltage CMOS device • 1.65-V to 5.5-V VCC operation • SOT-23-5 package • High-impedance inputs • Low-power consumption • High-noise immunity • High-speed operation • High-output current capability • ESD protection • -40°C to 125°C operating temperature range Applications: The SN74LVC1G04DBVR is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Consumer • Portable • Computing • Networking • Telecommunications

A plan, a rough, an idea for a new product, and Mecanic Systems will bring your wishes to life. For that, we have two specialist departments: CAD : Computer Assisted Design creates 3-D models of your assemblies and creates, according to machine possibilities, each of the components making up your product. CAM : Computer Assisted Manufacture, installed on several workstations, enables formation of the geometry of flat items and the conversion into machine programmes after sheeting. All these programmes are driven to CNC machines by way of a computer network.. These systems recuperate design files in the following formats: DXF, IGES, DWG. These can be sent to us on diskette, by zip or e-mail to mecasyst@mecasyst.be.

AXRO - Your partner for network peripherals and hardware. As a specialist for original consumables, we have been supplying resellers with office supplies for more than 25 years. We have expanded our product and brand portfolio with computer and network peripherals from TP-Link. Your advantages at a glance: - Comprehensive, highly topical product and brand portfolio - High availability of goods - Profound market and industry knowledge - Individual sales persons - Worldwide delivery We are looking forward to your inquiry!

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

Protocols and networking features of Cisco Unified SIP Phone 3905 include: Session Initiation Protocol (SIP) support IEEE 10/100 network and computer ports collocation to save cabling infrastructure costs

Due to the fact that punching and cutting processes are performed with molds in single-sided printed circuit board production, our company has established its own mold production facility. Printed circuit information from customers is converted into a format suitable for mold production machines in the CAD/CAM work preparation center and transmitted to the mold center via the local computer network. In this center, necessary mold drawings are made using this information, and molds are produced quickly and precisely on state-of-the-art machines.

Transparency for all process steps Software: transparency for all process steps Using our exclusive software package ‚AiBOX' complete process control and high transparency for all process steps is guarantueed - at the push of a button. Our software package ‚AiBOX' includes cylinder management with compelete track and trace data for your quality management. The required interfaces for your ERP system are custom-made. Reports and statistics can be created according to your requirements. Visualizing processes SCADA connectors allow a clear visualization and control of your processes. For your challenges at filling applications we have developed the package "fillcontrol", which enables the seamless integration of scales in an extensive computer network environment. Statistical modules for monitoring the efficiency and process reliability are in the same way possible, as the data transfer to the quality control and traceability.

This network switch 8 10/100/1000 ports used to connect several computers to a network. It is also a very practical solution if all ports on your router (wireless) are busy and you want to connect.

Docker is a software for managing isolated Linux containers. It solves a number of problems with the development process and its infrastructure, therefore it has become an important part of modern IT.

Linux Administration. Basic Level in Training Center Education. In this course, we will give the knowledge and skills to work as a Junior System Administrator. We made this program based on the experience of our specialists and after the market analysis.

Here we will go through the ABC’s of system administration. It is suitable even for those who haven’t worked with Linux before. During the course, we work with Debian distribution, and at the same time we will install and configure CentOS components using our knowledge base. As a result, we will learn how to work with two systems. Linux administration course for beginners in Training Center IT Education Center.

Ethernet Extension Cable,VENTION 10ft/3m Cat6 RJ45 Extender Male to Female Network Cable Shielded Computer LAN Connector SSTP Patch Cable

The Inventory Manager regularly scans your Cisco switches and dynamically builds a ‘map’ of the IP network and the connected devices (e.g. phones, computers, laptops, printers). The inventory provides a sound baseline for customer-specific network management applications. The Inventory Manager is a server-based application which periodically can scan up to 10.000 different Cisco switches in a network. An example is the use of the Inventory Manager in certain customer-specific deployment scenarios of our ALM Single Sign-On application. In order to create a mapping between Cisco IP phones in the network and attached computers, laptops or thin clients, the Inventory Manager periodically scans the network and creates the mapping. This mapping ensures that each time someone starts his or her laptop, the right IP phone in the network is associated to that user.