Wedge - Import export

Steel, nitrile rubber. Note: The low non-slip levelling wedge is suitable for loads of up to 2 tonnes. The levelling wedge provides a large support surface with a nubbed structure made of nitrile with a hardness of Shore 80. Using the flat angle of the wedges, the height of the levelling wedge can be adjusted by 0.15 mm per turn of the screw. The vulcanized non-slip layer provides durable insulation from vibrations, noise, and corrosive media.

Steel, housing plastic, adhesive anchor steel. Note: Suitable for adjustment loads up to 12 tonnes. The heavy-duty anchors apply the centre double wedge principle. With the centre double wedge principle, the machine support height is adjusted by two wedges instead of one. The wedge movements are consistent and free of play. With the double wedge, the force acting on the lifting mechanism is halved and the central support point always remains rigid and stable. The spherical machine support on rounded discs can compensate for unevenness in the floor. Horizontal movements are prevented by the centring sleeve which holds the floor bolt in the form of an adhesive anchor. Application: Example applications of the levelling wedge are for levelling heavy machine tools, high-speed milling machines, and transfer machines

ETA-08/0173 OPTION 1

The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces. These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops. The wedge has a slightly elongated hole allowing for movement to compensate for tolerances. Spread width: M8 = ±0.5 mm M10 = ±1.0 mm M12 = ±1.0 mm M16 = ±1.5 mm Drawing reference: D) DIN 6912 cap screw 1) Jaw face smooth 2) Jaw face serrated 3) Wedge clamps 4) Workpiece 5) Fixed stop

- All Natural - Plant Based - Kosher - Ready to Eat - No GMO - No added MSG - Halal - No Artificial colours, flavours or preservatives Available varieties: Original, Sweet Chilli and Smoked Chilli & Garlic.

Wedge sockets for civil engineering (wedge sockets for slurry wall grabs) with countersunk or overlapping pin Rope-Ø Load Wedge h3 h4 r s kN Item-No. 22 125 BBK 0022 00 000 000 191 144 11.6 31 24 125 BBK 0024 00 000 000 189.5 144 12.6 31 26 220 BBK 0026 00 000 000 229 175 3.6 36 28 220 BBK 0028 00 000 000 226 175 14.7 36 30 250 BBK 0030 00 000 000 261 200 15.8 41 32 250 BBK 0032 00 000 000 260 200 16.8 41 34 310 BBK 0034 00 000 000 285 227 18 48 36 310 BBK 0036 00 000 000 284 227 20 48 Rope-Ø Load Pin (countersunk) d2 d3 h5 t Wedge sockets complete kN Item-No. with countersunk pin 22 125 BBB 2224 00 000 000 48 58 95 30 BBT 0022 KB 000 000 24 125 BBB 2224 00 000 000 48 58 95 30 BBT 0024 KB 000 000 26 220 BBB 2628 00 000 000 55 65 111 35 BBT 0026 KB 000 000 28 220 BBB 2628 00 000 000 55 65 111 35 BBT 0028 KB 000 000 30 250 BBB 3032 00 000 000 62 74 125 35 BBT 0030 KB 000 000 32 250 BBB 3032 00 000 000 62 74 125 35 BBT 0032 KB 000 000 34 310 BBB 3436 00 000 000 62 74 133 35 BBT 0034 KB 000 000 36 310 BBB 3436 00 000 000 62 74 133 35 BBT 0036 KB 000 000 Rope-Ø Load Pin (overlapping) d4 h6 m n Wedge sockets complete kN Item-No. with overlapping pin 22 125 - - - - - - 24 125 - - - - - - 26 220 BHB 2628 00 000 000 55 164 49 65 BHT 0026 KB 000 000 28 220 BHB 2628 00 000 000 55 164 49 65 BHT 0028 KB 000 000 30 250 BHB 3032 00 000 000 62 177 49 74 BHT 0030 KB 000 000 32 250 BHB 3032 00 000 000 62 177 49 74 BHT 0032 KB 000 000 34 310 BHB 3436 00 000 000 62 186 50 75 BHT 0034 KB 000 000 36 310 BHB 3436 00 000 000 62 186 50 75 BHT 0036 KB 000 000 Please find certificates and instructions in our download area:

alternative (short) fixing-kit for Conti Polyflat and polyrope on request material socket housing: G20Mn5 material wedge: 226D

Fixing-kit with wedge for Conti Polyflat and Polyrope optional with pin galvanized surface With type testing similar to EN 13411-6 material socke housingt: G20Mn5 material wedge: 226D material pin: 8.8 Please find certificates and instructions in our download area:

Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area:

Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Wedge sockets according to DIN EN 13411-6 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. 1= pin with split-pin, please find further technical information under " accessories for wedge sockets". 2= threaded pin with counter-nut and split-pin, please find further technical information under " accessories for wedge sockets". * hot-dip galvanized surface ** yellow-galvanized surface (for a better distinction from similar parts acc. to DIN 43148, hot-dip galvanized, yet made from other material) *** longer strap for a better assembly of ropes Ø 31/32 mm Please find certificates and instructions in our download area:

Wedge sockets for open line construction, telecommunications and hang down the lightning hot-dip galvanized surface Can also be used for counter ropes and stretching wires. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. KK2 0203 00 000 148 KK2 0405 00 000 148 * out of standard ATTENTION: Depending on exploitation of tolerances, certain difficulties may occur upon assembly of 7,5mm diameter ropes. Please find certificates and instructions in our download area:

Wedge sockets acc. to DIN 43148 hot-dip galvanized surface The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * out of standard Please find certificates and instructions in our download area:

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets acc. to DIN 43148 are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Threaded pins with counter-nut for wedge sockets acc. to DIN EN 13411-6 galvanized surface material: 42CrMo4V The threaded pins are assembled with thin nuts acc. to DIN 439 and washers acc. to EN ISO 7089.

Pins, washers and split-pins for wedge sockets acc. to DIN EN 13411-6 galvanized surface *material: ST

Pins, washers and split-pins for wedge sockets acc. to DIN 43148 galvanized surface

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

Portable welding machine use fixed or mobile Welding width 50mm with 12mm groove Welding speed up to 20m/min with one single operator 1 aluminum body heating in 1000 or 2000 Watt 50 x 75 x 12 mm with special position for cleaning or changing Temperature control WATLOW high sensitivity SD series up to 490°C

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

This special Triad has been designed around the basic finishing needs of the digital graphics market. This package, based on the 1" (25mm) hem wedge and housing, can provide several welding functions including overlap, flat hem, hem cord and pole pocket welds. The Triad Digital Graphics Package is also available with a 1.5" (38mm) wedge for a larger finish size. For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers.

AUTOMATED PRODUCTION OF RETRACTABLE INSECT SCREENS First introduced in 2005, machines of the 520 series caused a revolution in the insect screen industry by drastically reducing the production time needed to make a screen, the necessary man power, and the discards. With its wide variety of tools, accessories and software solutions, this machine is, by far, the most complete manufacturing solution for quality 6 meter profiles and custom sized retractable insect screens solutions available on the market today and will deliver the efficiency and quality that you are looking for. With more than 150 units supplied to major manufacturers of insect screens in Europe and beyond, machines of the 520 series have proven their worth and reliability throughout the years and are a benchmark in the industry.

ROTOSONIC (ULTRASONIC), LIQUID GLUE AND/OR HOT AIR Highly specialized fabrics and very specific, customized applications is what characterizes today’s demand in many industries. Whether you weld clear PVC or PVC coated textiles, acrylic or polyester fabrics, thermoplastic films or insect mesh, whether you create pockets, overlaps or hems, apply zippers, keders, omega or anti drip profiles with its choice of technologies and wide selection of accessories SM 216 SA can create a variety of seams and apply countless profiles and accessories on an infinite range of technical fabrics. SM 216 SA features the patented Intelligent Torque technology that allows welding with uncompromising quality. Whichever fabrics you weld, Intelligent Torque digitally controls the tension during the welding cycle and delivers exceptional productivity, outstanding efficiency and unique, highly professional products

Miller Weldmaster T 600 Extreme combines versatility and precisely controlled operating parameters within an ergonomic design and interface for easy operation, speed, accuracy, and productivity. FEATURES, FUNCTIONS, & BENEFITS Easy operation with our touch screen and 25 memory settings. Weld rollers are independent, controlled witch helps produce an expanded range of products and materials. Guides and accessories to weld hems, overlaps, hem with rope... Equipped with dual arms The “Table Arm” takes care of straight seams for applications like tarps, awning and tents; while the curve arm manages curves and unique shapes for applications like boats and inflatables. Inboard puller to help to feed heavy and wide material. Built with one person operation in mind. It comes with a speed of up to 15 meters per minute. Welds PVC, PE, PU and many more. Can weld acrylic with our special Extreme Seam TapeTM. Comes furnished with the new “Seam Screen.”