Electric heating elements - Import export

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

We are using CNC - technology for the laying of thin and insulated heating wires on a variety of carrier materials in order to manufacture all kinds of heating elements. We can work up to sizes of 2 x 2 m, and we can realize medium series (500 - 10.000pcs.) as well as high volume productions (up to 1 million pcs.). All voltages from 3,7V up to 480V are possible. With our elements we can reach temperatures of up to 200°C. Please do not hesitate to contact us!

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

Heaters for household electric water heater on a flange of 48 mm Thermex, Ariston, Electrolux, Gorenje, Galmet, Ferroli, Tesy, Fismar, Round, Inner, Liko, Classic, Alpari, Fox, Braun, Реал, DeLuxe, Arti. Heaters for a boiler is made of a qualitative copper pipe on the modern equipment.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

With our CNC-wire-laying technology is it very easy to integrate functions like heaters for Anti-Icing/De-Icing or surface sensors for detections of structural problems in carbon or glass fiber parts. We can manufacture dimensions up to 2500x8000mm.

CSN ® Explosion proof cartridge heaters as direct heaters for liquids or gases in hazardous environment. These units are equipped with a heating bundle or a replaceable ceramic heating element. For temperature control these heaters are available with an integrated temperature monitoring system. These devices are available in various material grades. The electric cartridge heating element type 93./..EEx….T.(.) is designed for the heating of liquids in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 2014/68/EU) Art. 4, Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL Further information about our CSN® ExCartridge Heater

EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric duct heater Electrical duct heater type “LEH-K” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Product Specification Usage: Mainly applied to model 933 electronic soldering iron Voltage: 220VAC Heating Resistance: 140Ω±10% Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

Electric 12V 13V Alumina Ceramic Heating Element Heater Rod for Oxygen Sensor Advantages Ceramic Heater for Oxygen senster is used for heating oxygen sensors that detect the exhaust gas of vehicles and is equipped to most of automobile gasoline engines. Because the temperature can be rapidly raised, it is possible to activate the sensor immediately after the engine start which provides useful feedback to reduce emissions. 1.Based material: a.white alumina ceramic b.the content of alumina is no less than 95%. c.the tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C 2.Ni-wires:N6 Ni-wires with 0.6mm diameter 3.Brazing material: siliver-copper braging alloy

Made of stainless steel 20 mm thick polished steel grill plate With electric heating elements 400 Volt Regulation by thermostat with a temperature range of 50 °C to 300 °C With safety thermostat and thermocouple Insulation of the device, with heat dissipation on three sides Top with 40mm heatresistant insulation Has 1 recess in the teppanyaki top for the fat absorption and collection Equipped with safety rail at the front Substructure with sliding doors

The homogenizer is used in food, cosmetic, pharmaceutical, chemical and other industries, for the production of ketchup, mayonnaise, creams, gels, pastes, ointments, household chemicals, varnish-and-paint products, pharmaceutical substances and other emulsions and suspensions, which do not divide into layers, also for emulsions of high dispersing.The installa-tion is made in the form of a vertically located reactor with a volume from 100 to 1000 liters with a conical bottom. The reactor is equipped with a heat exchange water jacket with a block of electric heating elements, as well as a frame stirrer or blade type mixer, with a speed of 56 rpm. The homogenizer is equipped with a homogenizer pump and a loading device for dry products. The heat exchanger jacket can also be used to cool the finished mixture. It is possible to supplement an installation with a fat's melting down barrel and with a dispersing device. It is possible to ensure the vacuumization of the product in the reactor.

Tangential fan convection with electric heating element. The Katherm QE is the ideal solution when a LPHW convector cannot be used. It stands out on account of its energy-saving and ultra-quiet EC tangential fans. The high-output electric heating element delivers high heat outputs. coupled with low sound levels. Benefits — heating without water — fast warm-up at low sound emissions — ideal alternative to convectors with LPHW Applicatioms All areas of buildings in which effective heating and cold air screening is required. Katherm QE units can provide energy-saving and low-noise heating particularly when the use of LPHW is not provided for or possible

EMA series evaporators are designed with an extra slim aluminum frame, making it an ideal option for small premises. This compact small capacity evaporator saves space and can be installed in narrow niches. Assembled with high quality copper tubes with working pressure up to 32 bars, aluminum fins, AC/EC fans and electric heating elements for defrosting, this product is ideal for commercial applications in various supermarkets, cold rooms, warehouses and more. Fin spacing varies between 3,5 mm and 9,9 mm at Te from +10 ºC to -40 ºC. These evaporators can also be designed for CO2 systems up to 80 bars on request.

Wide capacity range EMC series evaporators are the most popular option when choosing evaporator for applications in various supermarkets, cold rooms, warehouses and other premises. They are easy to instal, as well as easy to maintain and clean. Assembled with high quality copper tubes with working pressure up to 32 bars, aluminum fins, AC/EC fans and electric heating elements for defrosting. Fin spacing varies between 3,5 mm and 9,9 mm at Te from +10 ºC to -40 ºC. These evaporators can also be designed for CO2 systems up to 80 bars on request.

Introducing our BT Series Water Heater, ranging from 200 to 500 with solid thermal insulation, and BT Series 750 to 2000 featuring removable thermal insulation. Crafted with high-quality ceramic enamel, these water heaters guarantee durability and efficiency. The composite high-performance removable thermal insulation, measuring 80 mm, ensures optimal heat retention. Equipped with a flange for an electric heating element, two magnesium anode rods, and an inspection flange, these water heaters provide advanced functionality. With a maximum pressure of 6 bar and a temperature capacity of up to 95°C, our water heaters are designed to meet your heating needs. The Class C insulation enhances energy efficiency. For those eager to explore more about this model, please feel free to reach out to us. We are here to provide additional information and answer any inquiries you may have.

The STE-6 electric stock pot range is used in large-scale kitchens and public eating facilities to heat and prepare food. The 440 mm electric heating element is embedded in the upper plate. The unit is made of food safe stainless steel. Heating element input is regulated with a four-position switch and a light indicating when the unit is turned on. The stock pot range has adjustable legs to accommodate uneven floors.

Tilting pan with indirect heating and integrated stirrer is designed for frying, steaming, cooking vegetables, fish, meat, sauces, pasta with constant stirring, eliminating the risk of burning or uneven heat treatment. Processes: •Stewing •Cooking •Evaporation •Frying •Deep frying Advantages: • Equipped with a duplicator and electric heating elements. • Fast heating and high thermal efficiency. • Reinforced stirrer with Teflon scraper, which in continuous mode cleans not only the entire bottom, but also the walls of the pan, ensuring a perfect result. • Tilt ensures complete unloading of the working container. • Made of high-quality food-grade stainless steel AISI304 or AISI316L. • Easily sanitizable • No dead zones. Technical specification: Working volume up to 130l Recommended Termooil heating Frying temperature up to 160 C Stirring device: yes Product unloading type: electric driven tilt system Dimensions (LxHxW): 1800x1900x1400 mm Weight: 350 kg

In all industry sectors, where heat is part of the production our products will be found. On injection moulding machines and extruders, for plasticizing of synthetic granules also for sealing of covers in packaging machines with diverse cup-geometry our heating elements deliver the heat. There are numerous applications, where our electrical heating elements are in operation. Our extensive product range of Temperature Sensors, Controllers as well as Ovens make our programme of delivery complete.

An automatic washer is designated for: - Returnable containers washing and cleaning - Plastic tanks washing (household waste trash containers) - Boxes and trays washing - Pallets and platforms washing Washing capacity is 100-900 boxes per hour. The washer dimensions can vary for different size of the returnable container. The АПУ 400K washer allows you to clean plastic boxes of E1, E2, E3 and E4 standards. The automated unit allows you to wash any plastic and metal containers and equipment as follows: tanks, bread trays, boxes in meat production and milk containers, household waste trash containers and pallets. The device may include washing unit, rinsing and drying units. The washer is equipped with a conveyor, a control cabinet, assembly compartment, tubular electric heating element, a temperature sensor and a solution level meter. The conveyor speed is individually adjustable and can reach several meters per minute.

The most efficient model of washing equipment designed for continuous processing of parts. It may include washing, rinsing and drying units. The washing unit is equipped with a conveyor, a control cabinet, an assembly compartment, an oil separator, tubular electric heating element, a temperature sensor and a solution level meter. The conveyor speed is individually adjustable and can reach several meters per minute. The unit is designed for surface treatment by high pressure water jets to remove oil and grease contaminants, fine chip, cooling mixtures, and coked-free sand and dust deposition. The installation fully meets modern requirements applicable to the parts, components and assemblies washing technology. The unit is intended for indoor use.

wide range electric heating elements for saunas

This fan speed controller is used to control EC fan speed. The unregulated output can control a water valve or an electric heating element. Via the rotary knob the temperature can be set between 5 - 35°C. Fan speed is regulated manually in 5 steps, there's an Off-position and automatic mode. In automatic mode a temperature sensor PT500 is required. Choice between cooling/heating mode can be done via Modbus communication or a jumper. This controller can be connected to our SenteraWeb or a BMS-system. .

Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.

Mechanically durable and thermally shock resistant, PBN/PG heaters are unaffected by vibration under most conditions and can be tailored to thermal gradients for specific requirements. With an ultra-fast response and low thermal mass, PBN/PG heaters demonstrate a power output of 35 watts/cm 2 (225 watts/in 2 ) and higher.Size customization, please let me know the use temperature, current and voltage. -Crystal growth (VGF, LEC Crucible) -Molecular Beam Epitaxy(MBE) Crucible -MOCVD Heater -PBN Infrared Window -Traveling Wave Tube (TWT) (PBN Support Rod) -PBN Coating Graphite -High temperature, vacuum equipment insulator

Ceramic heating element (steatite) 1500-2400 W 230 V is suitable for water heaters Drazice, Atlantic and other that use this type of heating elements. Steatite heating element for dry boiler is made of quality ceramics (steatite) and modern equipment.