Electricity cabinets - Import export

JS INTEGRAL manufactures control cabinets based on documentation provided by the customer (electrical and mechanical) or other technical arrangements, complying with the relevant requirements of PN-EN standards, including mining standards. Our control cabinets are used: •for power distribution and protection of electrical equipment against short-circuits, overvoltage and overload, •to control the operation of motors, pumps, fans, air conditioning, drives and other electrical appliances, •to control production processes in production and energy production / distribution companies, •to signal, control and monitor the performance of machinery and equipment, and technological processes in industry and power industry, •to implement control and monitoring functions in BMS and HVAC systems.

Alfa System steel enclosures are metal structures used to realise various distribution panels, in industrial and residential applications that require complex configuration. This type of enclosures are made ​​from cold rolled steel sheets 1 ÷ 3 mm thick, painted in electrostatic automatic painting line. Can be delivered as flatpack solution Assembled from front and back frame 1 Removable back wall and side covers 3,6 Door fitted with sliding handle and polyurethane gasket Protection degree up to IP55 acc. IEC60529 58 standardized sizes available

Switchgear for residential buildings

Junction boxes

Cable boxes and enclosures for mining

Cable metering boxes

Power supply and control for a complete set of heliport or airport lights Input power range: 110-230V AC Made to order in according to specification IP 65 for the electrical cabinet metal case powder painted equipped with control lamps

KBC Diffusion, specialist in construction equipment, offers you a complete range of construction equipment to equip your concrete plants, cranes, living bases.

Metalux manufactures control cabinets based on documentation provided by the customer (electrical and mechanical) or other technical arrangements, complying with the relevant requirements of PN-EN standards, including mining standards. Our control cabinets are used: •for power distribution and protection of electrical equipment against short-circuits, overvoltage and overload, •to control the operation of motors, pumps, fans, air conditioning, drives and other electrical appliances, •to control production processes in production and energy production / distribution companies, •to signal, control and monitor the performance of machinery and equipment, and technological processes in industry and power industry, •to implement control and monitoring functions in BMS and HVAC systems.

We produce standart ranges of enclosures, electrical panels, covers for machinery, special design machinery cabins. Our production has internationaly quality certificates, Steel cabinets for industrial sectors,

highvoltage transformer stations, stations which require people to be isolated against electric shock from certain devices such as electrical cabinets, etc. Environment: dry Advantages: light thanks to its low thickness conforms to IEC 6 11 11 Standard good abrasion resistance antislip easy to clean

Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be signalled or transmitted via indicator lights and/or dry contacts. The operating conditions of each heating circuit in the cold store is indicated by LED indicator lights. Via keylock or push buttons, all heating circuits can be checked quickly and simply. You can easily get an overview about economic efficiency and energy consumption of your heating system incl. documentation with an operating hours counter or energy meter.

Together with our customers, we develop scalable control and automation solutions for their assembly, laser and ECM lines to meet their requirements. In doing so, we attach great importance to the topicality and future-proof development of the technology used. Programming under SIEMENS SPS, SIEMENS NC, BECKHOFF HMI and robot technology are our specialties. We are experts in realization drive and feedback control engineering, electrical project planning, control-cabinet construction, software development and control engineering.

Pre-fabricated STRATE AWASTATION service buildings are set up directly on top of shafts (STRATE AWALIFTSCHACHT) or optionally alongside shafts on concrete foundation blocks. Pre-fabricated solutions offer the possibility of housing system components e.g. shaft cabinets, control elements, electric systems and service connection so that they are easily accessible integrating further optional system components e.g. STRATE AWAaerob ventilation systems, operating data recording and remote transmission etc. One-piece pre-fabricated concrete building, suitable for road and crane transport with four threaded attachment and transport sleeves Re-siting of the service building is possible Inside walls: exposed concrete, painted with washable dispersion paint, colour according to customer wishes Outside walls: textured render, painted in colour according to customer wishes Floor: smooth concrete floor plate with openings for shaft cover, cable duct etc.

Machine automation and control console Electrical equipment Cabinet 2mm mild steel body Durable welded design IP66 protection for external applications Locked and hinged doors Special carrying and fixing accessories Epoxy-Polyester powder paint Primer painting for external applications Zinc coating solution against corrosion and oxidation. PEM screw-nut driving solution for ease of assembly Shock absorber covers Mounting trays Production in special sizes

Stand-alone lithium power packs The most POWERFUL & LIGHT-weight stand-alone power solution! LITHIUM cabinets provide the electrical autonomy required for optimised operation of all types of electrical devices: computers, printers, terminals, industrial equipment, control equipment, etc. They integrate electrical storage, energy conversion, interfacing and control functions in a complete, secure, flexible and easy-to-use system.

Electrical control panel for starting and capacity control of : the compressor, the air dryer, the cooling water system with pump when supplied. Cabinet made of 2mm enamelled plate, protection to IP54 hermetically sealed and containing: Main circuit breaker and fuses. Star delta starter for compressor. Fuses for auxiliary circuits. Safety device to prevent compressor starting against load. Microprocessor description overview Capacity control with fully automatic start and time delayed stop of the compressor. Monitoring of air an oil temperatures on each stage, as well as oil and air pressures. Safety controls. Memorised defect system. Service intervals for maintenance. Details of loaded and total running hours. Simple keypad operation. Multi language message displays. RS485 data communication line for remote control or monitoring. Diagnostics, reprogram, Analog, digital configuration… new model available 2009 sept. Main Selection Monitoring Start control Pressure...

Electrical connections between motor, control cabinet air dryer and water pump. Specific electric motors : protection degrees, IP23 or IP55. Efficiency class : IE1, IE2, IE3. Different optional voltage and frequencies, standard is 400V/3/50HZ or 60HZ +/- 10%. Other voltage is on request : 380V/3/50Hz or 60Hz, 575V/ 60Hz… Soft starter SIEMENS SIKOSTART. Standard is Star Delta starter, the optional soft starter is integrated in the main electrical control cabinet. The compressor is equipped with an electrical pre-lubrication oil pump for the crankcase. Air-conditioning for electrical control cabinet for inside temperatures exceeding 40 for soft starter & 45°C for standard electrical cabinet. The frequency inverter electrical cabinet is protected against high temperature through a different selection of internal components (powerblock…).

Evaporative closed loop cooling towers : For temperatures above 32°C. Cooling capacities are selected to suit the local site wet bulb temperature, up to 30°C ( Wet Bulb ) to provide the most efficient cooling system. The tower and the water pump are controlled by the compressor’s electrical cabinet. Option : two speeds fan motor for winter and summer, antifreeze protections, tracing. Radiator cooling systems. Selected for maximum ambient temperatures up to 32°C, other selections accepting temporary heat peaks up to 36°C and 40°C during some hours per day. These specific versions are equipped with an automatic spray system with thermostatic control The radiator fans and the water pump are controlled by the compressor’s electrical cabinet. The water pump. is mounted on the compressor’s base plate. The cooling system, its functions (automatic spray system for radiators and antifreeze protections for cooling towers) and the water circulating pump are thermostatically monitored by...

Protection for hot temperatures Oil cooler – radiator for inside temperatures exceeding 40°C. This option comes along with the air-conditioning in the electrical control cabinet, the water cooled condenser for the HP Dryer. Specific selection of electric motor ; IP55 motor for hot and dusty environment, tropicalizing (see electrical options) Protection for cold temperatures Oil warming for inside temperatures between 1 and 5°C. Specific selections of cooling systems with protections items depending on site conditions (see separate cooling system options) Miscellaneous Condensate drain collector. Made from stainless steel, equipped with silencers and flexible rubber connections for collecting the condensates from the individual drains – Bekomat drain system used on the compressor, dryer – option- and receiver to simply be connected to the sewer ( flexible rubber hoses supplied suiting to a standard installation lay out – see the standard installation lay out drawing). Low sound...

The 400/230 Vac and 48…220Vdc auxiliary services cabinets are designated to supply the low voltage consumers within the 110/20(6)kV transformer substations of the power supply and distribution companies: Electrica SA, CEZ Group, ENEL Group, E.ON Group; Transelectrica’s 400/220/110kV connection and transformer substations; hydro power plants; thermal power plants.

electric metering cabinets, customized on any size, made of steel, powder painted

CONTROL COMMANDS FOR STERILE PLANT: Achievement of the control of two plants intended for the production of injectable medicine for animals. The prize process was realized in partnership with our subsidiary Sofast specialized in the construction of equipment for the sterile processes SMG CHECK COMMANDED PRESS: Retroffiting process and cabling of two press 1500T and 320T for the manufacturing of join for drilling tubes, with implementation of automaton. REVAMPING sterilizer: Complete revision of the system of control commands of a line of sterilization of milk. Realization of electrical cabinets and software.

The medium voltage switchgear with double bar system is designed for the primary distribution on the medium voltage part of transformation stations from the power distribution systems and combines the new technologies with the existing infrastructure. The medium voltage switchgear with double bar system is an indoor electrical equipment, in metallic compartments cabinet, with insulation in the air, being formed of a vacuum breaker and air bar separator.

GL1-N series automotive paint booth is a non-pitted paint booth offered in a standard configuration that includes exhaust fan and but excludes intake fan and heating system. It is typically used as sanding booth, primer booth and quick repair booth. Standard Configurations -Lighting system: upper lights are 8*4*18W LED light tubes, no lower lights; -A tool cabinet and an electric control panel are integrated in to the rear wall of this paint booth. The tool cabinet is designed to add extra storage capacity to keep supplies and tools which are commonly used for sanding and painting. And the electric control panel contains emergency stop button, single-phase & three-phase sockets, compressed air quick release couplings, etc. This greatly increases paintwork efficiency while avoiding unnecessary entering and exiting the paint booth; -Infrared paint curing lamp is optional;

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap • machine frame from aluminium profile • indexing transport system for jars • horizontally working conveyor for jar infeed and discharge • position control for jars in indexing rotary transport • dosing pump from 1.4404 • 10 l hopper with level control • filling nozzles driven by LinMot-e-motor • pick and place system for pre-cut foils from magazines driven by LinMot-e-motor • 1 spot sealer to fix the foil at the sealing rim of the jars • sealing system with conduction sealing head • capping station with LinMot-e-motor • infeed conveyor for caps • electric cabinet with operation panel • manual central lubrication system • safety doors with aluminium profile frame and windows from makrolon

The PURION MULTIPLANT 2501 / 8 is designed to enable UV based disinfection for high flow rates up to 120 m³/h. The electric control cabinet can be equipped with the Operating Time Counter (OTC 2) or Operating Power Detection (OPD 2) via sensor. The potential free contact D1-D2 (error sum signal) enables easy integration into existing monitoring systems. options for configuration: hot water up to 90 °C Operating Time Counter OTC 2 Operating Power Detection OPD 2 advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087

The PURION PRO MULTIPLANT 2500 / 6 is designed for UV based disinfection in case of high flow rates and special liquids with very low transmission. The electric control cabinet can be equipped with the Operating Time Counter (OTC 2). The potential free contact D1-D2 (error sum signal) enables easy integration into existing monitoring systems. options for configuration: hot water up to 90 °C Operating Time Counter OTC 2 advantages: additional chemicals are not required for disinfection not affecting smell or taste low-maintenance operation low operational costs Please contact us for targeted advice: mail: uv-technology@purion.de phone: +49 3682 479087