Epdm rubber seals - Import export

Archifit® Window Seals; It is applied to windows used in civil residences, accommodation facilities, hospitals and clinics, university and campus facilities, sports facilities and administration buildings. The series has a wide range of products suitable for window frames made of timber, timber and various materials such as aluminium, plastic (PVCU).

Archifit® Timber Door Seals; It fills the gap between the active and inactive leafs of the inner room and outer entrance doors. Seals, which tend to operate dynamically on the frame, prevent draught, light and dust transmission, provide thermal insulation and create a barrier against noise pollution.

Archifit® Window Seals; It is applied to windows used in civil residences, accommodation facilities, hospitals and clinics, university and campus facilities, sports facilities and administration buildings. The series has a wide range of products suitable for window frames made of timber, timber and various materials such as aluminium, plastic (PVCU).

Archifit® Window Seals; It is applied to windows used in civil residences, accommodation facilities, hospitals and clinics, university and campus facilities, sports facilities and administration buildings. The series has a wide range of products suitable for window frames made of timber, timber and various materials such as aluminium, plastic (PVCU).

NSPV Dust cap for solar connectors L03002-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for MC4 connectors.

Additional adapters compensate the curvature of barrel roofs Modules can be mounted parallel on roofs with a radius of > 3.5m Non-shearing attachment via special drilling screws Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge Module can be mounted vertically or horizontally

Simple mounting on aluminium and steel trapezoidal sheet roofing Non-shearing attachment via special drilling screws Pre-installed EPDM rubber provides additional sealing between roofing and short rail Module mounted horizontally Clamping on the long side of the module Designed for roof gradients of 5° to 25°

Simple mounting on aluminium and steel trapezoidal sheet roofing Non-shearing attachment via special drilling screws Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge Module can be mounted vertically or horizontally Designed for roof gradients of 5° to 35°

Non-shearing attachment via special drilling screws Additional adapters allow modules to be raised another 5°- 7° Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge Module can be mounted vertically or horizontally Maximum roof gradient including additional gradient of module 20°

The Quick Repair (QR) transition coupling sets a new standard for quick but professional repairing of leaking pipe connections. The QR coupling is maintenance free and made entirely of stainless steel AISI 304 with a rubber sealing (EPDM or NBR) inside and is therefore fully protected against corrosion. The wedges are easy to assemble without using a special tool and you only have to clean the sealing surfaces. Furthermore a big benefit of the QR coupling is that you don’t have to stop the flow during mounting, the pipeline stays operational. This sustainable professional solution means a lot of time gain for the mechanic.

The fully synthetic H1 approved silicone grease contains antimicrobial additives to prevent microbial growth within the grease. Turmsilon LMI 5000 clean is especially developed for the lubrication of EPDM seals, rubber joints, membranes, lip seals. It can be applied at all processes requiring a high level of cleanliness and for which growth of pathogenic germs is a potential risk.

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut

RAIL LAYER SIZE Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels. MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut Stainless double bracket

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut Stainless single bracket

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut

RAIL LAYER SIZE Short & Long Size SCOPE OF APPLICATION Pitched roofs with trapezoidal sheet metal or sandwich panels MODULE ORIENTATION Vertical or horizontal ROOF FASTENINGS Bimetal selftapping screws with sealing washers Epdm rubber A270 stainless screws ERA clips nut

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® pipe Bend 90° female/male

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan-ECO pipe 6 m rods

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 90° F/M-thread

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan Bend 90° M-thread/nut

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Full crossover F/F

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 60° with plain ends

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 90° female/male - long

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.