Equipment for pharmaceuticals - Import export

We manufacture process equipment according to individual needs and specifications, and in accordance with the requirements and standards of the industry for which stainless steel equipment is needed. We design and manufacture stainless steel process equipment for production or service processes. Only stainless steel is used for the production of process equipment for the food industry. Inox, which in this industry is also known as food-grade prochrome, is ideal for use due to its chemical properties, simple maintenance and primarily because it has no harmful effects on humans and the environment. All elements of stainless steel processing equipment, such as chrome trolleys, technological cabinets, chrome shelves, chrome tables, trash cans, benches, are made according to the customer's requirements and in accordance with the standards applicable in the food industry. Pharmaceutical equipment is produced exclusively from inox. Inox is also known as surgical steel.

These are made by aluminium, used for the mechanical support and connection, after process then doing sandblasting + natural oxidation.

When it comes to equipping a professional kitchen, a stainless steel table made by Profinox is always the right choice for customers looking for equipment with a long service life and increased resistance. Operating since 2005 as an established supplier of products and equipment for the food and pharmaceutical industries in Romania, France and Germany, we are one of the leading manufacturers of stainless steel tables in the country. We constantly manufacture stainless steel tables to order for the HORECA industry, but also for the pharmaceutical industry – at the same quality level for both Romania and export. A stainless steel table made to order by Profinox specialists comes with a number of benefits compared to commercially available tables, and if we were to make a comparison with wooden furniture manufacturers, we would address those who want solid wood furniture.

After every successful filling of a package, it is a basic condition for precise dosing that the thread is defined and breaks off cleanly. This effect usually occurs with water-like materials - with viscous products, so called semi-solids, but often not: Many products such as creams, gels and ointments pull long threads from the tip of the dispensing needle into the respective packaging. The ViscoTec Pharma Dispensers provide a solution: After a dosing shot of the Pharma Dispenser, the product path through the chambers in the rotor-stator system is blocked, thus preventing dripping of the dosing medium. A valve at the dosing needle or at the pump is not necessary. Thanks to the reversible direction of rotation, retraction can be set after the end of dosing: The material is drawn back into the dosing needle in a defined manner.

Machine for shaping and punching holes in catheters. Working speed: Up to 5 cycles/min, about 1200 cycles/h.

With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1 1/2" thread. The thread adapter adapts and thus compensates for different thread shapes. The drum adapter ensures that decanting is liquid-tight; a seal made of ePTFE reliably seals the connection. The thread adapter made of stainless steel is electrically conductive and highly chemically resistant. It can therefore be used for filling solvents and other flammable liquids (e.g. alcohols, petrol, diesel etc.) as well as for weak alkalis and acids.

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

The task of storing liquids hazardous to water or to their processing must be handled responsibly. In the building of the corresponding process containers, storage tanks, stainless steel containers, different factors must be taken into consideration. They are designed according to regulations, such as PED (AD-2000, SVTI, EN13445) or according to special standards, such as the Basel chemical standard BN76 and manufactured in stainless steel. Process containers and storage tanks have half-pipe coils, jackets or laser-welded structures (pillow plates) for heating and cooling purposes. KASAG is the competent place if you are looking for replacement, modification, extension or reconstruction of complete tank plants. We will share your responsibilities.

Pressure vessels, reactors, Pharmaceutical and biotech pressure vessles, Process containers, storage tanks, Modules, components, plants, High-pressure apparatuses,Heat exchangers, vaporisers, condensers, Cryo pressure vessels, technologies Nuclear technology, Vacuum chambers, vacuum apparatuses, Columns, according to PED (EN13445 / AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Pharmaceutical and biotech apparatuses are calculated and manufactured according to your requirements. Stainless steel and special materials are used in the production. After that, the products are grinded, electropolished and tested using non-destructive testing methods, such as ferrite measurements, used for the determination of the ferrite content, or by using the riboflavin test to measure total discharge and CIP/SIP capability. All materials, methods and processes used have been documented in full in detailed QA documents and can be tracked at any time. You can depend on KASAG.

With Novartos Multi triple sampling, a triple multi-point sample can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine sample chambers are each fitted with three sample inserts fot the triple sampling.

ARKPEEK (PEEKCHINA) has developed high-purity, corrosion-resistant, low-elution PEEK high-performance plastic parts, which have been widely used in analytical chromatography instruments, preparative and semi-preparative chromatography instruments, protein purification equipment, IVD equipment, sample pretreatment equipment, pharmaceuticals and the environment. monitoring equipment and other related equipment.

The newly developed CinchSeal®series is applicable for machines in food production, screw conveyors and other bulk material handling equipment, in the pharmaceutical industry as well as in the chemical industry. It is made of 316 stainless steel or other material according to customer requirements. standard features ✔ lower maintenance due to unique self-adjusting design ✔ prevent leaks and material loss and protect gearboxes, bearings and shafts from damage ✔ mounting pattern suitable for standard bearings ✔ handles dry powders, pastes, slurries, and liquids ✔ USDA- and FDA-certified sealing products for use in meat, poultry, and dairy applications ✔ needs 30% less energy than packing seals ✔ temperature ranges -40 °C to 220 °C ✔ designed to accommodate longitudinal expansion and axial runout of the shaft ✔ pressurization with sealing air, 0.3 to 0.6 bar above the pressure of the operating vessel

Geppert Ruhrtechnik offers you a modern working environment with extensive additional services, individual training and further education opportunities as well as health offers. Whether you are a pupil, student, graduate or experienced professional: with us you can contribute your knowledge and skills in a targeted manner. We look forward to committed and passionate people who want to work together towards our goals.

The GRW series is suited for a wide range of applications thanks to shaft lengths of up to 3,000 mm and drive ratings of up to 5.5 kW. It has a standard output speed of between 10 and 200 rpm. Low installation height thanks to horizontal position of the drive. The agitator shaft of the GRW series geared agitator is directly mounted in the hollow shaft of the worm geared drive. Additional flanged or clamp couplings can be implemented upon request. The agitator shafts are balanced for concentric run after assembly of the mixer. According to the specific mixing task, the GRW can be supplied with matching mixing elements and various seals. Upon request, we supply the GRW series with frequency controlled drives.

The LRD series top-entry sealed agitator can be used for mixing in closed containers with a mechanical seal. It is designed with a coupling housing. The agitator shaft is borne in the bearing housing and the mechanical seal (single- or double-acting). The seal can be exchanged without dismantling the mixer from the tank (also in case of a side entry). Drives with shaft journals for LRD series: Three-phase motor Helical geared drive unit Parallel shaft geared drive unit Variable speed geared drive unit Helical bevel geared drive unit According to the tank size, the LRD series agitator is available in four different frame sizes. Shaft diameters of 30 mm to 90 mm and shaft lengths of up to 10,500 mm are feasible. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3). Pharmaceutical version with FDA and GMP feasible.

The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the GLP on a drum.

In the treatment of drinking water, whether done conventionally or via seawater desalination, agitators are used for rapid mix, precipitation and flocculation processes. Precipitation and flocculation processes require low shear, slow-running agitators. For pH adjustments and rapid mixing faster running agitators that can blend reactor content in a flash are required. Wastewater treatment also requires a multitude of application options for agitators. In anaerobic and anoxic tanks for nitrogen removal, slow-running agitators are used to suspend and homogenize activated sludge flocs. In aeration tanks, mixer/aerators can be used for efficient oxygenation and mixing. Where waste water is purified, sludge is generated. This sludge is generally conditioned using polymers, dewatered, and then digested in anaerobic sludge digesters to generate biogas. Special agitators are required for both polymer introduction and for digested sludge mixing.

Geppert Ruhrtechnik GmbH has been a certified manufacturer of explosion-proof agitator drives since 2003. This made us one of the first companies to develop and produce ATEX-compliant agitators. Our agitators are certified to ATEX Directive 2014/34/EU (formerly Directive 94/9/EC) in gas or dust explosion-proof designs. In addition, the majority of agitator styles have type test certificates for explosive zone 0, and can be used in applications in which an explosive atmosphere, arising from a mixture of air with flammable substances in the form of gas, vapor, or mist, is present. We offer ATEX-compliant controls for our explosion-proof design agitators. Talk to us and make use of our many years of experience on the topic of explosion protection. We will be happy to assist you! Our services in the field of explosion proof agitators

OUR IN-HOUSE TEST PLANT AND LAB In order to ensure the high quality and long service life of our agitators, we have set up an in-house plant for testing our agitators. At the end of the manufacturing process, all of our agitators undergo a specific test procedure with a final test run. Here, we can test agitators with a shaft length of up to twelve meters. When designing our agitators, we use fluid mechanics simulations in our in-house laboratory. All Geppert mixing systems are delivered with O&M Manual and worldwide technical service.

For over 50 years, Geppert Ruhrtechnik has stood for quality and reliability in agitator construction. We develop, manufacture, and distribute innovative agitators for all applications in the materials processing industries, such as the chemical, pharmaceutical, biotechnology, and food industries, as well as in water and wastewater treatment. Our many years of experience make us the perfect partner for both standard and special applications. When selecting and designing our agitators, we draw on our many years of experience, internal databases, and state-of-the-art tools (such as FEM, Finite Element Method, and CFD, Computational Fluid Dynamics), as well as our own fluid mechanical laboratories. This means we always provide you with the optimal solution. In addition to our agitators, we manufacture suitable containers and stands for stand-alone, wall mounted, and mobile designs. We can implement these in your plants, taking into account any its specific requirements.

In the manufacture of semiconductors, agitators are mainly used in conditioning of polishing and cutting suspensions, etchants and other auxiliary chemicals, cleaning solutions, or in chemicals recycling. Requirements placed on stirring systems are extremely demanding. Almost always, clean room conditions prevail, meaning that drives and seals must be designed with no abrasion or leakage. Parts that come into contact with the medium, such as the shaft and stirring element, often have to be produced with metalfree surfaces due to the aggressiveness of the media and the purity requirements. Also in this area, Geppert Ruhrtechnik can look back on a very successful history. All well-known chip manufacturers belong to our client base, as well as the manufacturers of the specialty chemicals used in this field. In addition, our agitators are used in broad solar cell production areas.

Despite the increasing level of digitalization, an ever-increasing demand for paper and pulp products can be observed. However, a shift is taking place from print paper qualities to packaging paper and cardboard. The wide range of paper products requires a variety of production processes. These include mechanical and chemical processes which, depending on the form and variant, produce different pulp qualities. Stirring and mixing are essential unit processes in all types of paper and pulp production. Mixing tasks range from liquid/liquid or gas/solid/liquid mixtures, through mixing of complex liquids, and include mixing of chemically reactive components. Improving and optimizing mixing processes in the paper and pulp industry can lead to end product improvements; such as increased strength, improved luster, or significant energy or chemical savings.

The pharmaceutical and biotech industry involves a wide range of mixing tasks, for which precision and consistence are of utmost importance. Particles must be evenly suspended and homogenized in liquids for filling processes. In some cases, multiple processes, such as for example heat transfer, rapid mixing, or material transport, must take place simultaneously within one reactor. Specific requirements are often placed on the drives, if for example production is carried out under clean room conditions. The surface quality of the stirring elements must always meet the highest standards; they are therefore usually electropolished. Our agitator solutions for the pharmaceutical and biotech industry are engineered and manufactured to customer-specific requirements. Selection of the agitator, as well as of the drive and sealing concepts, depends on the process and customer specifications. We will provide all the necessary design calculations, or simulate the mixing process.

Paints and coatings play a significant role in our lives. Without them, life would be dull and even monotonous. But they don’t just provide color. They perform a multitude of other tasks as well. For example, they protect objects or structures from corrosion and deterioration, thus contributing to the sustainable use of resources. Equally, special coatings can contribute to a reduction in flow resistance, or create a pearled finish that makes objects easier to clean and reduces contamination. Paints and coatings generally consist of binders, fillers, pigments, solvents, resins, and perylene, as well as additives. These substances must be mixed together homogeneously during the production process. Various agitators are used to achieve this, for example dissolvers, depending on the process step and according to the boundary conditions.

Mixing of substances and chemical reactions are closely interconnected. The way in which different reagents are mixed together can have a significant influence on product quality, product yield, or even on the resulting product itself. Stirred reactors are used in the chemical industry for a range of applications. They can be used for reaction, extraction, distillation, crystallization, and other processes. Depending on the reactor process and operating mode (continuous, semi-batch, or batch operation), the agitators used can be subjected to varied demands. In the petrochemical industry, emulsification, absorption, desalination, alkylation, or neutralization processes are commonly found; lubricating oils must be homogenized or sludge oils suspended. For this wide variety of mixing tasks, Geppert offers tailor-made agitators to satisfy operational and customer requirements.

Challenging, customer-specific mixing technology solutions can be numerically simulated as early as during the planning phase, and the results analyzed. This means increased design confidence, high-quality solutions and, as a result, reduced project durations and costs. Our experts from THINK Fluid Dynamix® are specialists in the application of numerical techniques such as flow simulation in real time and artificial intelligence methods for automated optimization. This enables processes, such as stirring and homogenization, to be analyzed more accurately under consideration of all applicable process parameters, and complex tasks to be processed far more efficiently. These methods set entirely new standards in terms of design reliability and efficiency. Allow us to contribute to your success!

The SV 30 is a small stand mixer with manual stroke adjustment and spring suspended lid for small batches that range in volume from 20 l up to 100 l and agitator drives of up to 1.5 kW. It is supplied with helical gear agitators of up to 0.75 kW or fast running agitators of up to 1.5 kW and the suitable mixing elements. Thanks to the H stand as well as two hook blocks, the SV 30 can be moved. The weight is balanced by means of a counterweight positioned in the stand column itself. The pneumatic supply is guided through a laterally mounted energy chain. Explosion-proof design ATEX 2014/34/EU feasible.

Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to 1,000 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done electrically by a lift drive and chain drive. The electric supply is guided through a laterally mounted energy chain. Customized solutions for instance a stand mixer with H foot or stand equipped with coaxial agitator type KRK are feasible.