Chemicals for cleaning - Import export

Ultrasonic-Regeneration means: most thorough chemical deep-cleaning under mild conditions complete removal of all catalyst poisons ultrasonic cleaning of the fine microporous structure of the catalyst no damage or change of the microstructure

WIWOX® 410 is a liquid, alkaline mould cleaning agent for the removal of burnt rubber and plastic residues from metallic surfaces. It is also used as a paint stripper. WIWOX® 410 is used undiluted for immersion cleaning of metal moulds. The construction material for the tank can be sheet steel or stainless steel. The tank size depends on the moulds to be cleaned. The pool can be heated from the outside or inside by a heating coil. The processing temperature is generally approx. 80° C. The processing time depends on the degree of soiling and the type of soiling between 10 – 30 minutes.

WIWOX® 250 is a very alkaline cleaning concentrate for organic (oil, coal, grease etc.) and inorganic (magnesium, lime etc.) residues on tools and moulds. It can be rinsed off residue-free without a film on the surface. The concentration depends on the working conditions, the degreasing time, the degree of soiling, etc. (between 5 – 30 %). Regular replenishment by checking the bath can prolong its service life. In contrast to powder concentrates, lthe iquid formulation allows convenient use without danger of exothermic reaction in the plant.

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

"The classical drive board with high-quality plastic barbed hooks. – suitable for all pads on the market – perfect hold and gentle treatment of the cleaning pad – innovative geometry of the plastic barbed hooks – resistant to chemicals of all common cleaning agents – almost unlimited life through unique plastic formulations – with cro-connect and integrated cro-lock safe hold of the pads when lifting the brush unit Pad operating widths: 12"" - 22"""" Water hole: with / without Including matching cro-connect"

Siegling Extremultus elastic food tapes are specifically designed for applications in the food industry. The tension member is made of elastic polyurethane and is thus 100% fray free. Siegling Extremultus elastic food tapes are: – food-safe; FDA and EU compliant – available in blue or white to optimize quality assurance (contrast to food) – elastic and thus excellent for short center distances, belt scales and are suitable as spreading belts – easy to clean – chemically resistant – available with High Grip coating Select Siegling Extremultus elastic food tapes also support the HACCP concept. Typical coating combinations UU = Polyurethane underside and top face UR = Polyurethane underside, High Grip top face

The world´s only drive board with antibacterial effect. - recommended for all commercially available pads, especially for textile/microfiber pads. From a minimum thickness of 12 mm - over 99.9% effective - drive board body and harpoon drive face are fused together by patented laser welding to form an absolutely firm connection - pads are held securely and gently by innovative plastic barbs - chemical resistant to all commercially available cleaning agents - perfect pad hold when lifting the machine due to integrated cro-lock operating widths: 16"" - 18"" Water hole: with / without"

The side walls of urban and overland buses are put under major strain by the daytoday demands placed on them stone chipping, scratches and minor and major accidents quickly cause damage to the thinwalled metal sheets found in older models. What's more, in some cases the effects of weather and chemicals such as deicing salts and cleaning products can lead to unsightly signs of corrosion, which can damage the image of the bus company among its customers. This makes repairs and touchups necessary. As noncorrosive plating is not always available for older vehicles, TC manufactures side walls made of glass fibrereinforced plastic that are suitable for all such models and makes, and provide an optimal and durable alternative to older metallic plating.

The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spatula blade, total length 178 mm. The spoon spatula has many different uses in labs – as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use, resistant to chemicals and corrosion-proof. Clean room manufactured, available either in a large package with 100 pieces or 100 pieces packaged individually and sterilised by gamma rays.

In the manufacture of semiconductors, agitators are mainly used in conditioning of polishing and cutting suspensions, etchants and other auxiliary chemicals, cleaning solutions, or in chemicals recycling. Requirements placed on stirring systems are extremely demanding. Almost always, clean room conditions prevail, meaning that drives and seals must be designed with no abrasion or leakage. Parts that come into contact with the medium, such as the shaft and stirring element, often have to be produced with metalfree surfaces due to the aggressiveness of the media and the purity requirements. Also in this area, Geppert Ruhrtechnik can look back on a very successful history. All well-known chip manufacturers belong to our client base, as well as the manufacturers of the specialty chemicals used in this field. In addition, our agitators are used in broad solar cell production areas.

These robust universal troughs are suited for several applications areas as they facilitate the safe and clean transportation of goods or tools. Characteristics: — Exceptional stability — Nestable — Circumferential rim — Easy to clean — Resistant to most common chemicals and cleaning agents

The 100 l troughs are tried and tested in many application areas, e.g. as portable washing troughs or mixing troughs. Characteristics: — Made from pure HDPE — Resistant to most common chemicals and cleaning agents — Easy to clean thanks to smooth inner and outer walls — Available with or without drain opening — Can be easily connected to a drain via a 1 1/4'' screw thread — Food-safe. HACCP compliant — With feet — Easy grip all around the top — With drain and plug (Trough 81291111) Accessories: — Table stand or wall frame

The large containers are well-established, particularly in the meat processing industry. The food grade containers have also proven their worth in several other application areas, e.g. as storage containers for food additives, spices and other mixing goods. Characteristics: — Available in various sizes (125 l, 210 l, 300 l, 400 l) — Made from pure HDPE — High wall thickness, heavy quality — Nestable — Stackable with lid (300 l container also stackable without lid) — Forklift accessible (except for 125 l container) — Resistant to most common chemicals and cleaning agents — Easy to clean thanks to smooth inner and outer walls — Standard fitted with reinforcement bar (except for 300 l container) Accessories: — Lid — Trolley (210 l and 400 l)

The transport and stacking boxes are an indispensible part of smooth logistics in the food processing industry. They facilitate easy handling and reliable, hygienic transport processes. Characteristics: — Available in various sizes and versions (Stacking box: 25 l, 55 l, Transport box 40 l, 80 l) — Made from pure HDPE — High load bearing capacity and impact resistance — Nestable (40 l, 80 l) — Stackable (25 l, 50 l, 55 l) — Resistant to most common chemicals and cleaning agents — Easy to clean thanks to smooth inner and outer walls

The food grade bins, tubs and buckets are used across all industries for mixing, storing and transporting of goods. Characteristics: — Available in different sizes and versions Bin 40 l, 50 l, 75 l, 110 l, 200 l Bucket 20 l, 30 l Tub 65 l, 85 l — Made from pure HDPE — Durable and robust — Nestable; stackable (with lid) — Resistant to most common chemicals and cleaning agents — Easy to clean thanks to smooth inner and outer walls — Robust handles Accessories: — Non-hinged lid (except for 20 l and 30 l bucket), snap-on lid for watertight closure (75 l and 110 l) — Trolley (only for seleceted versions)

The universal containers are true to their promise. They can be used for a variety of applications, from storing animal feed, collecting organic waste to the secure storage of tools and appliances in construction site and workshop operations. Characteristics: — Available in various sizes from 210 l - 400 l — Made from pure HDPE — High wall thickness, heavy quality — Nestable — Forklift accessible — Resistant to most common chemicals and cleaning agents — Standard fitted with drainage hole and plug — Standard fitted with reinforcement bar Accessories: — 3/4" drainage tap — Non-hinged lid, lockable hinged lid

The blueglobe CLEAN Plus is the first cable gland to be certified to the high EHEDG standard and therefore can be used without risk in the food, pharmaceutical and chemical industries and in clean room technology applications. BGN also confirmed conformity of this cable gland with the relevant applicable testing specifications in test certificate NV 13132. The cable gland blueglobe CLEAN Plus has no cavities, gaps or external threads but has a smooth surface (roughness Ra < 0.8 μm) and rounded surfaces in contact with the wrench. PFLITSCH uses high-grade stainless steel 1.4404/AISI 316L to manufacture this product. All seals are made from plastics that comply with FDA 21 CFR §177.2600 and are suitable for being in contact with food.

Carbon dioxide detection in industrial plants: Measuring range 0 – 5 % or 0 – 2 % vol. For Martians – provided they exist – a carbon dioxide atmosphere might be their natural habitat. We earthlings can only tolerate low concentrations of this gas. It is true that we are using the special properties of CO 2 for many purposes, but in concentrations above 5000 ppm it can be hazardous to our health. Therefore it must be monitored. In areas that are rarely accessed, such as beverage dispensing facilities, a leak detector might do as a warning device. Wherever people are present, such as workplaces in plants, industrial grade gas detection equipment is required. Here it is: Statox 501 IR. This new version of the field proven Statox 501 IR for combustible gases operates as a 4 – 20 mA transmitter. It can be connected directly to a recording device, process control system, or the optional Statox 501 controller. Its unmatched compact design makes it operable in any environment whether it is food industry, chemical industry, refineries, or cleaning facilities. This explosion proof instrument will do the job everywhere. It is water proof (rated IP 67). The housing materials (stainless steel and fiber-reenforced polyamide) are rugged and easy to clean.

Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has minimal health risks as well as having a low impact on the environment. Safety data sheets SDS silicone oil monochrome (PDF, 43 kB) SDS silicone oil color (PDF, 42 kB) SDS roller cleaning agent "Clean Protect" (PDF, 35 kB) Product information sheet "Clean Protect" (PDF, 33 kB)

High speed professional printing machines use silicone oil in the fusing assembly for toner release and to add gloss to the printout. These systems can be found in color as well as monochrome printers. Besides environmental safety, the following properties are important: Thermal stability Tightly specified viscosity Very low volatile content Chemical purity Functionally designed (amino or mercapto modified) Roller Cleaning Agents Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has mini

Diversity meets experience Surface treating and coating processes are just as numerous as they are diverse. We develop customtailored systems for almost any application, taking into account customer process specifications: Electroplating and chemical coating of metal component Electroplating and chemical coating of plastic components Aqueous cleaning of metal components Cathodic dip coating Electropolishing stainless steel and copper components Etching and staining metal components Etching glass and ceramic

PTFE-fiber with PTFE Impregnation and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Tank lid, door and lid seal Suitable for Static applications Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

Heat conductive ePTFE Yarn, PTFE fiber, Run-In Lubricant and elastic Silicon Tube Core Practical useful application data: max. temperature: +160 °C Characteristics Elevated heat conductivity For higher shaft speeds than S 6 SKV High chemical resistance and for clean media Operating range Pressure [p max]: 20 bar, Velocity [v max]: 10 m/s Temperature: t = -100… +280 °C pH: 1 - 14 Density: 1.60 g/cm³ Practical useful application data: max. temperature: +160 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Rotating Equipment with higher surface speed radial run out Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.2 15 2.8 16 [5/8"] 2.4 18 1.9 19 [3/4"]...

PTFE-fiber with PTFE Impregnation, Run In lubricant and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 6 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Slow Rotating Equipment with radial run out Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

ERC NANO 10-9 motor oil additive forms an ultra-thin functional layer in the engine interior and thereby reduces friction, wear and sediments. It improves the oil supply for improved engine performance and lower fuel consumption. THE EFFECT Even apparently smooth metal surfaces turn out to be rough when viewed under the microscope. Friction leads to wear and higher fuel consumption. ERC NANO 10-9 Motor Oil Additive „hardens“ the metal surface by chemical means, forming a smooth protective layer on surfaces subject to high frictional stress by building up chemically active nano structures (“bottom-up”). This leads to optimum engine power and lower fuel consumption. THE ADVANTAGES AT A GLANCE - Highly effective reduction of friction and wear through chemically active NANO structures - Cleans engine and oil ducts free of deposits - Reduces noise and stabilizes oil pressure - Improves stability under load of the basic oil - Protects against oil ageing and corrosion

If no procedures for biological or chemical exhaiust air cleaning are to be used efficiently, the thermal treatment is regarded as method of choice. The basic thermal processes are Recuperative thermal oxidation Regenerative thermal oxidation Catalytic oxidation. The focus of our products lies particularly in the periphery of especially challenging special solutions Waste treatment Sewage sludge drying Waste water treatment Landfill aftercare Specialpurpose solutions for the chemical industry Food industry In general at corrosive media, at risk of condensation, and especially high specifications for the pure gas Since 2018 we are working close with our sister company Airprotech Srl. from Magenta/Italy in the field of thermal exhaust air cleaning. Beside our core products our range of products in the field thermal exhaust air cleaning is broadened Airprotech is specialised in the development, the manufacture and the supply of turnkey plants for thermal cleaning

Universal use durable disposable gloves for use in nursing, medical examinations as well as for surgeries, also in the chemical, food and cleaning industries as well as in hairdressing or cosmetic salons. Reliable protection in everyday work as well as at home, our hands are constantly exposed to organic and chemical environmental influences. Intco Medical vinyl disposable gloves provide reliable protection to ensure longterm skin health

Riga Force Product Birch plywood (Riga Ply) overlaid with a black glass fiber on one face. The reverse face usually is smooth (F).The wear face has a special surface pattern (WT). Applications Flight cases, steps of stairs, floor covering, loading platforms, exhibition stands, vehicle floors, children playgrounds. In general - surface where high wear-impact resistance and pleasant visual appearance are required. Advantages Decorative surface with high wear resistance, weather- and water-proof, resists commonly used chemicals and is easy-to-clean. Durable and easily workable . In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&amp;G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm 1250 mm x 2500 / 2750 / 3000mm 1500 mm x 2500 / 3000mm 1525 mm x 2750 / 3050mm 3100mm upon special request Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 9, 12, 15, 18, 21, 24, 27, 30, 35

Riga Crown Product Birch plywood (Riga Ply) overlaid with a phenol (dark brown, black) or an UV resistant (light grey, dark grey) film on both faces. The wear face has a special surface pattern (WT). The reverse face usually is smooth (F). Applications Flooring, transport industry, pedestrian bridges, storage and factory floors, storage shelves, loading platforms, pier surfaces, scaffoldings, ship decks, shop fitting and flight cases. In general surfaces where high wear resistance is required. Advantages Surface with high wear resistance, decorative appearance, weather- and water-proof, resists commonly used chemicals and is easy-to-clean. In addition, the product is environmentally friendly and hygienic. Further processing Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&amp;G), half laps, profiled edges etc. Sizes 1220 mm x 2440 / 3050mm 1250 mm x 2500 / 2750 / 3000mm 1500 mm x 2500 / 3000mm 1525 mm x 2750 / 3050mm 3100mm upon special request Cut-to-size panels and machined panels available in accordance with the customers' requirements. Thickness 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35