Controllers - Import export

Thanks to our many years of experience in the controls sector, you can benefit from a comprehensive range of products that also includes the right solution for even the most demanding requirements. Control your cranes, machinery and installations with our wire-connected control pendants – and utilise the wide choice of configuration options. Or profit from the maximum flexibility, safety and reliability offered by our radio controls. All of our controls give you ergonomic design, convenient operation and many opportunities to tailor the solution to meet the needs of your application.

Bosch Rexroth/Indramat Controller The following options are available for controller from the INDRADRIVE product range manufactured by Bosch Rexroth/Indramat Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an onsite service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. We are proud to be the only company worldwide from the control and drive industry to bear the status of "Bosch Rexroth Service Point". We are therefore able to provide you with a warranty of up to 24 months* on the services specified above for controller manufactured by Bosch Rexroth/Indramat.

— RS 485 interface for internal Brabender fieldbus — Application software for DDW (loss-in-weight feeder), DBW (dosing belt scale) or Coriolis flow meters — internal pluggable fieldbus connection — can be controlled via the OP1, OP6 and OP16

— Congrav® CB-E installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E — Congrav® OP1-S

— Congrav® CB-S installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E

— For intelligent control of multi-boiler systems and individual boiler systems — Easy connection to higher-level visualisation and control systems — Integrated monitoring and protection functions to prevent faulty operation — Extensive storage of operating parameters and operating signals — Secure remote access via MEC Remote — Intuitive operation with graphical symbols and state-of-the-art touchscreen displays

— Project-specific control system for optimum control of steam or hot water boilers — Maximum supply and operating reliability thanks to integrated monitoring and protection functions — Condition monitoring for consistently high system efficiency and availability of steam, hot water and heating boiler systems — Intuitive operation with graphical symbols and state-of-the-art touchscreen displays — SUC start-up, standby and shutdown system allows fully automatic high pressure steam boiler operation — Easy connection to higher-level visualisation and control systems as well as remote access via MEC Remote

— Modular complete solution with cost advantage, for all single-flame-tube hot water and heating boilers — Intelligent sequence control for up to four boilers — Intuitive operation via colour touch display and function keys for quick access — Pre-configured and completely wired for quick commissioning — Integrated power supply in the compact control cabinet, e.g. for burner and pumps — Compatible with all common automation system protocols — Optional remote access via MEC Remote for maximum availability

This technology's modular structure of the Control 8000 enables equipment to be set up individually for each project. — Customer-specific control thanks to flexible, extendable functional modules — Intuitive operation via colour touch screen — Simple connection to building management systems — High-performance standard equipment for intelligent control of your heating system — Versatile integration and simple assembly — Secure remote connection for outstanding availability and operation of your heating system regardless of location

— Identification of increased energy losses through intelligent on-site data analysis — Increased system availability – wear forecasts allow an optimum maintenance concept — Higher operating safety – intelligent boiler logbook with automatic evaluation of the entered data — Historic operating data – continuous data acquisition makes system optimisation and troubleshooting easier, optionally available via remote access — Digital document storage – all important system documents are saved locally and can be retrieved at any time — Easy system integration – transfer of the system data to the control system via common protocols or visualisation via PC/tablet (MEC Remote)

— For the convenient operation of steam boilers up to 4,000 kg/h of steam — Appealing price-performance ratio for steam boilers up to 4,000 kg/h of steam — Colour touch display for easy operation and clear visualisation of operating status — Flexible installation and small space requirement: installed on the boiler at the factory or loose control cabinet for wall mounting — Power electronics for fuel supply, feed water pump, blow-down and desalting — Optional: fully automated and conductivity-controlled blow-down and desalting

Comprehensive monitoring and alarm functions enable you to react quickly as needed to ensure the reliable availability of heating energy and process heat. — Convenient remote monitoring of your boiler system and access to all important operating parameters — Simply integrate the remote technology for connection via Internet or a company network — Fast and cost-efficient online support from Bosch experts on request — Safety first: Certified, multilevel security concept for your remote access — Automatic alarm notification by text message or e-mail as an option so you can react quickly when needed

— Connection via the Brabender fieldbus * Host computer interfaces — A maximum of 6 components — Operation of CM-E, CB-E, CB-S

— Compact component operation — Connection via a separate RS485 interface — Maximum 1 component — Operation of CM-E, CB-E — 5,7“ Color-Touch-Display

— Connection via the Brabender fieldbus — Host computer interfaces — Operation of CM-E, CB-E, CB-S — A maximum of 16 components — Recipes, diagrams, protocols

conTROL is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a tooth system contour between the lid and bottom. It is ideal for every type of industrial internal mounting that requires special EMC protection. A lid with an extra-high collar edge and visually appealing bevelling is also available to protect buttons or switches on the front of the enclosure. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Compatible cable glands are also availabe in the ROLEC product range.

FXL-CT table-top units are built for a maximum of 2 channels without preselection. They can be used to control magnetic chucks up to a total area of approx. 1.2m2. can be controlled. FXL-CT is designed as a table-top unit or to be attached to the machine wall by means of the magnetic feet on the back. The operation is carried out directly on the device.

Protherm controllers are universal configurable programmers that monitor, control and record processes running in a single furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • Up to 32 PID control-loops to regulate parameters such as temperature, furnace pressure, atmosphere parameters (e.g.: carbon potential, nitriding potential and oxygen potential) • Real-time monitoring of jobs at all stages • Process parameters configured with alarm limits • Online diffusion calculation to control the process using required target values (e.g.: case depth, surface carbon content) • Up to 999 treatments/templates can be created and modified • Integration with SCADA systems • For all types of processes: nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • For compliance with CQI-9, AMS 2750 &..

Unique: The TRY20 offers 3 axes and is still a compact thumb joystick The joysticks of the TRY20 series are unique in their class thanks to their rotatable knob, which, as a z-axis, offers an additional third, proportional degree of freedom for controlling the application. The industrial joysticks achieve the highest level of quality in terms of mechanics, materials and workmanship. The high-quality haptics convey a secure operating feeling and enable the user to precisely control movements in several dimensions. Double (redundant) outputs are optionally available, which enable use in safety-critical applications. Variants with protection class IP40 (hardcover) and sealed variants (rubber bellows) with protection class IP54 are available. If the z-axis (the rotatable knob) is not required, the 2-axis version with protection class IP65 can be implemented as a special version.

Inherently RFI/EMC immune and most flexible in its class The joysticks of the series 842 exhibit properties, which are normally found in bigger joystick models only, even though it is a very compact finger joystick. Particularly worth mentioning is the possibility to configure the three axes independently and the option for a friction clutch in x and/or y-axis. The series is equipped with potentiometers, because potentiometers are still the best choice if EMI/RFI resistance requirements are very high. The joysticks are available with up to 3 axes, and exhibit a robust mechanical metal mechanism. This way the return properties of the x and y-axis can be changed by e.g. using a stronger or weaker spring, or by using a friction clutch.

High-quality haptics for one-dimensional control tasks The proportional rockers of the PW30 series meet the highest demands on quality and reliability for long-term use in industrial environments. With the look of a rocker switch but the sensor technology of industrial joysticks, the PW30 series combines the advantages of joysticks (for transmitting an analogue control variable) with those of toggle switches (flat design, low space requirement). In addition to two different rocker shapes, choices between potentiometric or Hall-effect sensor technology, as well as between spring return to the centre position or to the end position, are possible. Redundant versions are also available on request.

Unbeatable small installation depth and the highest stability in its class. The joysticks of the series 844 exhibit properties, which are normally found in heavy-duty products only, even though it is a very compact finger joystick. For example, with handle "T" the 844 becomes the most compact stock grip joystick with push button (see picture above in the center). In this configuration, the 844 has the advantage over larger models of lower price and space requirements. The joysticks of the series 844 are equipped with wear-less Hall Effect sensors, are available with up to 3 axes, and exhibit a robust mechanical construction, with a ball-socket pivot. It withstands high push, pull, translational and rotational forces, up to a load of 400 N (vertically). The operational lifetime is up to 10 million operations. With protection up to IP65, a variety of handle shapes, limiters and output options, the optimum product can be selected for the application.

Space-saving, compact – but rugged nonetheless The TRY50 series covers the transition from finger- to hand-size joysticks. This is realized by a construction of the very robust mechanism combined with space-saving Hall sensors. The TRY50 was specifically developed for applications, where a rugged hand joystick is needed, but space is limited. The optimized dimensioning of the mechanism and control lever make it possible to use the joystick in environments, where only finger joysticks would fit, but lack the needed load resistance. The joystick is equipped with Hall sensors and thus shows only minimal drift of the output signal over many years of operation. Optionally, redundant sensors can be chosen to further increase reliability.

For many years now, the CNC PILOT has been proving itself in daily use on lathes and has earned a reputation for convenient NC programming. With the introduction of smart.Turn, HEIDENHAIN has made yet another step forward toward greater ease of use. Easily understandable program entry in forms, default setting for global values, numerous selections and straightforward graphic support ensure fast and easy operation. The new smart.Turn interface is based on the proven HEIDENHAIN-DIN PLUS. Because smart.Turn produces DIN PLUS programs. It provides both the NC programmer and the machine operator with all relevant information during program run. Thanks to its flexible design and numerous programming features, the CNC PILOT always gives you optimum support. Regardless of whether you are manufacturing single parts or batches, simple or complex workpieces, the CNC PILOT always provides the right support. The CNC PILOT is characterized by its simple operation and programming.

The joysticks of the TRY100 series cover a great variety of different applications due to their high number of configuration options, and convince technically in every respect The TRY100 is the all-rounder in the field of finger joysticks because of the extensive selection of handles, limiters and output options. Optionally, redundant sensors are available. Thus, the joysticks can be optimized for almost all possible applications. With the convenient plug-in contact and the small installation depth of < 26 mm, the joystick offers unequalled opportunities in case of space-limitations below the panel. Due to its modern contact-less hall-sensors, the electro mechanics guarantee for a long mechanical life expectancy of 5 million operations. The construction is laid-out for a load resistance up to 200 N, and improved handle options offer protection up to IP67 above the panel.

For many years now, the MANUALplus has been proving itself in daily use on cycle lathes and is characterized particularly by convenient manual machine operation. Application-oriented cycle programming enables the machinist to create and edit programs rapidly and effi ciently on the lathe. The introduction of the MANUALplus 620 extends the area of application to single-spindle CNC lathes. With the smart.Turn operating mode, HEIDENHAIN has made yet another step forward toward greater ease of use. Easily understandable program entry in forms, default setting for global values, selection options and straightforward graphic support ensure fast and easy operation. The new smart.Turn interface is based on the proven HEIDENHAIN DIN PLUS: smart.Turn creates DIN PLUS programs and provides both the NC programmer and the machine operator with all relevant information during program run.

Thanks to its flexible operating concept – workshop-oriented programmability with HEIDENHAIN conversational programming or external programming – and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for series and single-part production tool and die making manufacture of machines research and development prototype production and testing facilities repair departments educational and training institutes The TFT 15-inch color monitor shows a clear overview of all relevant information for programming, operating and inspecting the machine tool and control such as program blocks, comments and error messages. More information is provided through graphic support during program entry, test run and actual machining. The selectable split-screen display shows the part program blocks in one half of the screen and the graphics or the status display in the other half.

The thumb joysticks of the TRY14 series cover a great variety of different applications due to their high number of configuration options The TRY14 is the all-rounder in the field of thumb joysticks because of the extensive selection of handles, limiters and output options. The size of these joysticks can be compared with the ones that are widely used in gamepads, but the TRY14 is integrated into an industrial-suited housing with a reliable mechanism. Typical applications range from remote controls, arm rest integration or integration into larger joystick handles to industrial or medical robot arms.

The medium-sized hand joysticks of the 870 series with stock grip handle were specially developed for the multi-axis control of machines in demanding applications with highest requirements on quality and feel. The joysticks are a guarantee for success in demanding applications with up to three axes, where quality, durability and reliability are paramount. The precision manufacturing of the joystick results in a particularly high-quality feel that conveys a safe operating feeling and enables the user to precisely control movements in several dimensions. Thanks to the non-contact Hall effect technology and the optional double outputs, the joysticks are extremely reliable and safe to use even in the toughest conditions. The joystick is electrically connected via a 12-pin connector, which enables easy installation. The installation depth of <49 mm is particularly advantageous when space is limited.