Electronics industry - Import export

Testing requirements for a manufacturer in electronics industries had changed: For an assembly included in a smartphone, the absence of contact between speaker ultra fine wires and adjacent components is essential. Fulfillment of this condition, until now only subjected random sampling by microscopy, from now on has to be verified in a 100% procedure. Due to labor cost, microscopy for this amount of inspection is no more lucrative. Detection of ultra fine wires in electronic device The particular challenge The fine wires made of copper in smartphone speakers dispose of a high reflection and only a small diameter. The QuellTech Solution A high-resolution QuellTech 2D/3D Q4-5 Laser, featuring a particularly adapted laser wavelength and an ultrafine laser line in the corresponding installation, is combined with a linear axis equipped with a convenient encoder output. Due to its special chip analysis, the Quelltech sensor delivers a stable and highly reproducible signal on the fine wires

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

BIEGLO offers PEEK micro-mold parts up to 12mm in the largest dimension. Our smallest part to date is roughly 800µm x 300µm x 380µm and the thin wall section near 0.1mm. The feature aspect ratios around 6:1. In addition, the part volume 0.08 cm3 or less, the gate size as small as Ø0.1mm and the ejector pins as small as Ø 0.254mm. PEEK micro-mold parts must have a gate and ejection location consideration and the material selection can greatly affect the fill and definition of features.

BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.

For our customers in the automotive and housing industry, we produce deep-drawn stainless steel pots with an integrated axle as a monobloc component. These are used in water pumps for electric vehicles. Our customer from the automotive industry needs pots with an integrated axle that holds a rotor. Up to now, the pot and axle have been joined in a centred manner by means of welding. The customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.

STOL®76 is a precipitation hardened CuNiSi alloy for applications in the automotive, electrical and electronics industries. This alloy is particularly suitable for components in the medium strength range (up to 620 MPa). The combination of good electrical conductivity and good relaxation resistance makes this alloy especially recommendable for automotive connectors.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide rod. In line with different requirements of the Industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide rod can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. BIEGLO's sales portfolio for PEI contains rods from 8mm to 100mm. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

Electronic components need special protection against electrostatic discharge during transport and storage. bekuplast offers Euro containers, VDA-KLTs, plastic pallets and pallet lids made of electrically conductive plastic, known as ESD (for electrostatic discharge) material. Stackable ESD boxes and VDA-KLT made of ESD-conductive material are mainly used in the electronics industry and by automotive manufacturers and suppliers. ESD pallets and pallet lids are also available. Sensitive electronic components are thus fully kept safe and protected against electrical discharges, damage, and dirt during transport.

BIEGLO's sales portfolio for PEI contains also sheets from 8mm to 100mm as well as, PEI thin films below 1mm thickness are also available and the maximum width is 1200mm for sheets and film. Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. PEI is naturally flame retardant and has a fire rating of UL94 V-0. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide sheets. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. In line with different requirements of the industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide sheet can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries.