Flexible pipes - Import export

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

Angle seat motor valve for on/off and control operation with neutral and aggressive media. Universal actuator configurations with flexible accessories. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Pressure balanced version Degreased version, Silicon or PTFEfree version …

The MBS hydraulic cylinders of the MZR-1004 series are synchronized cylinders for use as actuating and control cylinders. All cylinders work with low friction and run stick-slip-free. The connection is made via a head flange attachment and a threaded attachment on the piston rod. For flexible use, fittings for pipe fittings according to BSPP ISO 1179-2 and venting connections are available on both sides. Lift and piston rod protrusion are also variable selectable. Our cylinders are prepared for use with position sensor and position monitoring. With the exception of the piston rod and the centering surfaces, the entire cylinder is protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of the types H, HL and HLP according to DIN 51525-1. If you have any questions about areas of application or other options, we are...

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Homogeneous rubber materials for a wide range of other possible applications With our new soft rubber division, we are opening up another interesting and important product field of modern rubber processing - that of homogeneous elastomers. Compared to our cellular materials, these homogeneous rubber materials offer a wealth of additional possible uses. What is soft rubber? The homogeneous elastomers from our soft rubber division seal particularly reliably at high closing and loading pressures. Mixtures of NR, CR, EPDM, NBR, fluorine and silicone, strengths of 30-80 Shore A offer you a wide range of applications. From simple pipe connections or flexible vibration dampers to complex components in automobiles - in all cases they take on important tasks for the durability and function of the entire system. You can therefore rely on the quality and durability of KOPP soft rubber. Modern process technology and careful quality control guarantee high durability and cost efficiency.

The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.

Application To avoid measurement errors and damage by foreign objects carried in the medium. Reliability Complete emptiying of conical design and drain plug at the lowest point of the filter (filters in cast). Special features Low pressure drop due to large filter surface area (up to 16 times the pipe crosss-section) Flexibility • DN15 to DN400 • -200 °C to +300 °C • to 3.000 m³/h • to PN100 • different materials

The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.

Our 3E inlay connector can be directly fastened to existing fittings with DIN 8063 male threads and is immediately ready for use with both flexible tubes and pipes. The inlay component of the 3E connector is manufactured as one piece with the connector integrated. This saves not only time and work, it helps to ensure that the connector is tight and thus safe to use.

The firm flexible tube or plastic pipe is pushed onto the integrated connecting sleeve of the 1C connector. The sealing ring forms a tightness for the connection, while it is secured in place by a cutting ring. Due to the knurled nut, this also affects the flexible tube. The cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body. A shear force is applied here that intensifies the contact pressure. This creates a friction-locked and tight connection that can be released at any time and minimises the dead volume.

The 3G glass thread apapter is used as a connecting element between the laboratory glass cylinder with GL thread and the connection for flexible tube. The connector features a rotating nut with GL thread on the one hand and a G male thread or connecting elements on the other hand. Various connection elements, flexible tubes and pipes can be fitted in this way.

The pipe or tube of the 2D pipe connector is inserted through the connector as required for bead tubes, immersion tubes, thermometers or sensors, etc. The pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place.

The 3C Tri-Clamp connector is easy to use: Simply press the two flange-like connector pieces against each other and fasten them together using the locking clip. A sealing ring is situated between the connector pieces to maintain a proper seal. The resulting connection is form-fit and smooth and a wing nut on the locking clip makes it easy to quickly open and close the connection at any time. The Tri-Clamp connection can be combined with a 1+, 1A or 1C flexible tube connector, a 2N pipe connector or a male thread.

For the 2N pipe connector, the pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place. This creates a friction-locked and tight pipe connection that can be released at any time, that eliminates dead volume in the design concept and also has no effect on the flow. The inside diameter of the connector does not correspond to the inside diameter of the pipe.

In the luer lock adapter 3L, a luer lock thread to DIN EN 20594-1 or ISO 594 (male or female) is combined with our connection for flexible tube 1A, connection for pipe 2M, a Tri-Clamp connection or a G, NPT or UNF male thread. A flexible tube can thus be connected, e.g., to the most commonly used disposable laboratory filters.

Our pump connection connector offers various connection options for pipes and flexible tubes for the most commonly used dosing pumps of numerous pump manufacturers. For example, diaphragm and hose pumps with an M20x1.5 male thread can be connected directly and leak-proof. The inlay component is manufactured from a single part with the connector integrated, which eliminates time-consuming welding.

Our duct systems can feature flexible sections, smooth sections and tailored connections to meet customers specifications. This is a reliable way to connect a corrugated tube to the connecting cuff and allows for time-saving assembly. The advantages are obvious: Weight can be reduced, and great flexibility and high strength in the cuff section are guaranteed Available materials / maximum operating temperature: PA12 120°C PA6.10 120°C PA6.12 140°C PPA 180°C