Force transducer - Import export

TesT Force transducers comply with the best technologies available. They incorporate our long experience as well as our customer's preferences and requirements for precise and robust devices for various applications. TesT Force transducers are particularly characterized by precision, quality, robustness, durability and convenient handling. On demand we also provide specially-designed force transducers with other dimensions and measuring ranges. TesT delivers all electrical force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data and automatically calibrate with them. Thus, these electronic units operate with dozens of different sensors so that a complex recalibration is not required.

The small dimensions of the hydraulic force transducers of the model series TesT 1001 / 1011 / 1021 as well as the flat building method permit versatile applications. The small transducers were conceived for occasional control measurements, e.g. for adjusting or service work. The indicating instruments of model versions 1001 and 1011 have a diameter of 63 mm. The indicating instrument of model version 1021 can have a diameter of 63 mm or 100 mm. All model versions possess a drag indicator to display peak values.

Inside the multi-component force transducer are two webs, each offset by 90°, each with a strain gage full bridge, which convert the radially acting X / Y forces on the guide bush into an electrical signal. Due to the sensor body made from a block with its special structure, the sensor has a very high degree of dimensional accuracy and low crosstalk between the two forces. Due to the special design, the sensor has excellent linearity properties and is designed for a long service life in dynamic applications. The two independent signal connections allow flexible adaptation and further processing. Features: — Measuring ranges: 0 ... 4448 N / 0 ... 2224 N (0 ... 1000 lbs / 0 ... 500 lbs); 0 ... 8896 N / 0 ... 4448 N (0 ... 2000 lbs / 0 ... 1000 lbs) — Further measuring ranges on request — Non-linearity < 0.1 % F.S. — Low cross talk < 0.75 % F.S. — High dimensional accuracy, because sensor is made from one part — Excellent price/performance ratio

The mobile evaluation electronics TesT 813 meet all demands that precise measurement processes require. They have been designed for use with TesT force and torque transducers, but they are also suitable for other resistance-based transducers. The devices consist of a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger allows f.e., saving peak values and/or curves in xls files. Basic settings, that had been stored once, even remain when the device has been switched off. Because of the high measurement frequency of up to 2 kHz the model can be used for static and dynamic measurements. Sensors that are equipped with TEDS (Transducer Electronic Data Sheet according to IEEE 1451.4) chips can be recognized and automatically calibrate. Thus, the units may operate with different sensors, so that a complex recalibration is not required.

The TesT electronic indicators of type 816 contain a process controlled electronic unit with most modern software. They can be combined with all TesT force sensors. The standard version of this device includes the usual functions in quality assurance: Peak value memory for tensile and compressive forces, selectable units: N, kg or lbs, On / Off switch. A list of options can be found below in the technical data. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight.

The dynamometers series TesT 323 include a force transducer and a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger with 4 MB, supplemented by an SD card with 2 GB storage space allows, f.e., saving peak values and/or curves in xls files. Online or after use the data can be transferred to a computer via an USB 2.0 port, for further processing / storage. Basic settings, that had been stored once, even remain when the device has been switched off. After switching it on the device is immediately ready for usage again. The handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications. The calibration is carried out with reference instruments or weights.

The electronic handheld dynamometers model TesT 326 include a force transducer and a process-controlled electronic unit with advanced software. The standard version includes the most frequently used features in quality assurance: Peak Value Storage for Tensile and Compressive Forces, Choice of Unit: N, kg, lbs, On / off switch. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight. The calibration is carried out with reference instruments or weights, which are in turn calibrated regularly by DAkkS approved bodies. The traceability to ISO 9000 ff is thus guaranteed.

Traceable calibration of testing machines and instruments is essential for industrial quality control. Calibration certificates are a compelling proof of test equipment inspection for the standards DIN EN ISO 9000ff and DIN EN ISO / IEC 17025. The time intervals for the calibration will depend on the applicable standard, but should normally not exceed 12 months. Attention should also be paid to the rules for local changes or repairs. Take advantage of our many years of experience in the field of calibration. TesT is accredited by the German Calibration Service (DAkkS, member of WECC) for on-site calibration of testing machines, for the quantities force, length and torque as well as a permanent laboratory for calibration of compressive force transducers

The inspekt blue material testing machines were designed for standard and routine tests. These universal testing machines are used, among other things, in quality assurance and are characterised by a particularly attractive price/performance ratio. The inspekt blue is suitable for tensile tests, compression tests, peel tests and bending tests on various materials. In combination with the ergonomic design and the new brushless drive concept, a safe and fast measurement is guaranteed with simplest operation both in the rough production environment and in the sterile laboratory area. Main features: - innovative brushless drive without gear drive - reduced noise pollution due to low engine speed and optimized frequency range - freely selectable control of crosshead travel, force or elongation - high-precision force measurement by strain gauge force transducer - versatile adaptation of accessories and additional force transducers