Lubricants- industrial - Import export

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS Plus L meets the strict food law requirements of the FDA US regulations in acc. with 21 CFR 178.3620(b) and 178.3120. SURVOS Plus has a high lubricity and quickly evaporates 100%.* * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free. The evaporation residue of SURVOS Plus L is 0.0045% or 45 ppm.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS – 100% residue-free* evaporating metal processing oil. SURVOS Rapid D evaporates considerably faster than the "Standard" formulation (with a somewhat lower lubricity). SURVOS Rapid D impresses, however, with short evaporation times and is 100% residue-free*. The fluid is used in particular when operations follow each other in a short cycle sequence and no residue is allowed to remain. * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free.

Our SAMNOS fluids are almost 100% biologically degradable fluids that do not require labelling. No work-related dermatological illnesses have occurred to our knowledge. The lubricity is very high, and it has a very effective cooling ability. All SAMNOS fluids form a thin, water-soluble film that protects against corrosion. SAMNOS ZM-22W is a universal cooling lubricant that can be used with almost all materials and machining processes and evaporates up to 95% residue-free.

Our SAMNOS fluids are almost 100% biologically degradable fluids that do not require labelling. No work-related dermatological illnesses have occurred to our knowledge. The lubricity is very high, and it has a very effective cooling ability. All SAMNOS fluids form a thin, water-soluble film that protects against corrosion. SAMNOS Standard is a processing medium that evaporates up to 97% residue-free. This fluid can be used with all materials, including plastic. Due to the special cooling properties of the fluid, SAMNOS Standard is used especially with very demanding machining processes.

Our high-performance machining oil SENTOS V-LR3 has a somewhat higher lubricity compared to our SURVOS products. This product also consists of volatile components that evaporate down to a lubrication residue of 3%. All components are approved according to USA-FDA §178.3910 as surface residues for the manufacture of food packaging. This makes our SENTOS optimally suited as a lubricant and drawing agent for punching and deep drawing (even with high contact pressures), for cutting and perforation of sheets (aluminium, steel, copper, brass, zinc-plated), including transformer and electric sheets, as well as for painted and coated sheets in particular. In addition, our SENTOS is especially well suited for cold profiling, bending and embossing, as a cooling lubricant for sawing, drilling, milling and engraving as well as a lubricant for cutting non-metallic materials.

WAX PE serves as a highly effective external lubricant for PVC. As a WAX PE, it is fully compatible with low- and high-density polyethylene and good compatibility with polypropylene. As a low density medium molecular wax, it has high oxidation resistance and improves the glitter and the surface finish if products. We would like to inform you that our waxes goes very well into printing inks, PVC compounding, Rubber processing, Hot melt road marking paints, candle, textile, leather and paper industries, cable filling, asphalt, cable jelly etc.

Lubrication of highly stressed chains, joints or slideways at higher temperatures For conveying systems running beneath radiated heat, in baking and drying lines in the foodstuffs industry Dry lubrication at operating temperatures above 200°C The synthetic oil content evaporates odorlessly without leaving residues, while the solid lubricant content are left behind to carry out dry lubrication Advantages and benefits Highly suitable as a high-temperature lubricant Highly effective due to homogeneous distribution of the finest graphite throughout the oil Versatile application as a liquid lubricant under high temperature conditions Resistant to water, chemicals, fuels, lubricants, and hydraulic oils NSF H1 registered For best results, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity

Heavy-duty grease: high-performance lubricant for demanding industrial applications The heavy-duty grease is based on a lithium complex soap and is enriched with high-performance additives and additives to provide outstanding corrosion and wear protection as well as high ageing resistance.

PL 200 is a long-term lubricant specifically developed for the industry. It contains premium, lasting, active ingredients and is suitable for use in temperatures from around -60ºC to 250ºC. PL 200 obstructs corrosion, oxidation, freezing, galling and wear. It is water-, salt water- and solvent vapour-resistant. It is adherent, wear-resistant and pressure-resistant. Water-repellent Protective against corrosion Non-toxic Loosens dirt Loosens rust Chemical-resistant Does not resinify Separates Withstands high pressure High penetrating properties CFC- and silicone-free Fields of application PL 200 is suitable for all common materials, e.g. metal, wood, rubber and almost all synthetics. It’s also suitable for almost all synthetic combinations in gear boxes, bearings, chains, screw connections, switches, channels, locks, etc. PL 200 can be used freely in the food sector. Usage Always shake well before use! Check plastic parts beforehand for compatibility, then just spray on, using...

OKS 4240 is a special grease for the lubrication of ejector pins in the plastics industry. Lubrication of ejector pins in the plastics industry at high temperatures and slow movements Lubrication of rolling and friction bearings at extremely high temperatures and aggressive operating conditions Advantages and benefits Extraordinarily good resistance to vapours occurring during plastic processing Good plastic and elastomer compatibility Excellent temperature resistance Lowest evaporation losses, also at high temperatures ensure long regreasing intervals Good media resistance Also suitable for fast-runing bearings thanks to low share of solid lubricants

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free

▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 6 mm and 22 mm / .24 inch and .87 inch

▪ Compact and light-weight design for applications such as Pneumatics, Instrumentation and Automotive Technology, Machine Tool Industry, Lubrication and Mechanical Engineering ▪ Available in 4 different sizes and covering all standard metric and imperial diameters between 3,2 mm and 25,4 mm / .13 inch and 1.00 inch