Pressed parts - Import export

These parts are used in printer accessories.

Experts for deep-drawn parts made of stainless steel, aluminium and other non-ferrous metals (including brass, copper and nickel silver).from new development to series production: We develop perfect deep-drawn parts. Pressteck is one of the world's leading specialists for deep drawing individual parts on transfer presses and for their further processing into assemblies. In this non-cutting forming process, we produce hollow parts in several stages from a metal strip that can be made of aluminium, stainless steel, copper or brass, among other materials. Deep drawing has decisive advantages over other processes: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and perfect deep-drawing technology beyond what has been possible so far.

PEKI vertical valve series is made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany. Short design with vertical lever arm and float, plastic and stainless steel floats from 3/8 to 1/2″.

PEKI float valve series made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany . Compact design with high filling capacity manufactured in brass, chem nickel-plated and stainless steel.

Our mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. PEKI valves can be manufactured according to customer requirements in construction length, material of the seal as well as in chemical nickel plating.

Our PEKI mechanical brass valve series has been manufactured for decades from high-quality hot-pressed parts and precision turned parts, which are assembled with modern plastic injection-molded parts and sealing elements made in Germany. The PEKI is a proven construction which has been tested millions of times. It has been further developed and is now available for the every first time completely in stainless steel / V2A. Many liquids are easily and safely regulated with the PEKI series via its mechanical level control.

Punching units Punching unit with exchangeable cutting elements for sheets and profiles up to a material thickness of 25.0 mm and a hole diameter of 150.0 mm JOKA punching units consist of a special cast stand that accepts the punch and die and ensures the exact axis alignment between the cutting elements (punch and die). In addition, there is a stripping system in the upper part of the tool stand, as the material wipes off automatically after punching. The scraper contains two or more disc spring packages that guarantee perfect scraping even in the border areas. A fixed connection between the tool and the upper part of the press is therefore not required. To determine the exact position, each tool has a positioning pin (two for shaped holes) on the underside, which is precisely aligned with the cutting elements (center of the hole). The above picture shows a complete punching unit without cutting elements and one cutting set (punch and die) each for round hole or shaped hole.

Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.

The combination of multiple technologies/procedures in one step is called OneShot technology. Semi-finished products (e.g. renewable raw materials such as natural fibers) and decorative materials (e.g. textiles) have to be handled in one production step to finish a component, such as a door panel. FRIMO has developed a modular system that allows for simple and customized configuration of a OneShot plant with all necessary tools. The following units can be integrated into such a plant: feeding station, heating station, calibrating station, material assembly station, press with OneShot tool, part-removal station.

Neodymium magnet (aka NdFeB magnet), is the third generation of rare earth magnet, which is composed of Neodymium, Iron, Boron and a few transition metals. With high remanence, high coercive force, high energy product, and high performance /cost, Neodymium magnet is currently the strongest magnet available in the world. Manufacturing Process Neodymium, Iron, Boron and a few transition metals will be mixed into the Neodymium powder, then fine Neodymium powder will be compacted in a die and sintered, fusing the powder in a solid state. There are two ways of pressing die pressing and isostatic pressing. Sintered parts normally need some finish machining in order to meet final tolerances. Machining & Tolerance Generally, Neodymium magnet must be machined using diamondgrinding techniques. Sometimes, machining operations may be performed on Neodymium materials with carbide tools, but surface finishes thus obtained may be less than optimal.

Projects that have already been implemented range from the construction of a "low-cost - high efficiency" laser welding system with CNC axis control focused on customer-specific needs, handling systems, assembly concepts, modular cable shoes, small presses for individual parts (bulk) or continuous goods (stips) for less than 8,000 Euros ... Convince yourself and get back to us! www.mechaSYS.de

The "Metzner RPA 60-LT" is a powerful robot press automation with an outstanding storage system for the highest demands in the handling of pressed parts made of hard metal and metal powder. With a storage capacity of up to 60 sintering plates, the it offers outstanding possibilities for the production of sintered parts of all types. All sintering plates are fed to the machine via four transport trolleys with 15 plates each. The intelligent handling system of the "RPA 60-LT" ensures uninterrupted loading of the pressed parts. While the first sintering plate is filled by a linear robot with multifunctional gripper, the handling system provides a second empty plate. As soon as the first plate is filled, the loading of the second one starts. Meanwhile, the handling system returns the loaded sintering plate to the transport carriage. The automation thus works according to the Kanban principle, which ensures that the press can be operated continuously even during the workpiece carrier change

Hydraulic presses are suitable for the high-precision forming of various parts, whereby the maximum press capacity is available in every position of the slide. In combination with their flexibility in terms of slide speed and dwell time, they are also particularly suitable for press hardening applications. Overview: ● Press capacity: 1,500 - 25,000 kN ● Part size: small, medium, large ● Application: for the production of drawn parts or as part of a press hardening line Description and benefits: ● Slide movement either pressure and / or travel-dependent ● Specially designed hydraulic system without shift shock during operation ● Motorized oil circulation with cooling or heating unit The models for press hardening are available in 8,000, 12,000 or 16,000 kN and come with a newly developed combination of servomotor and hydraulics that allows higher speeds in the closing and return movement of the slide.

C-frame presses are flexible solutions for manual work as well as for automated production processes. The CS is the all-rounder among the C-frame presses, while the ECS is ideal for punching and cutting operations with a higher degree of automation. Overview: ● Press capacity: 350-3,000 kN ● Part size: small ● Slide kincematics: crank ● Application: cutting, stamping, bending, embossing Description and benefits: ● Compact design, no foundation work required, good accessibility for maintenance ● Solid, low-stress annealed press body in monobloc design with minimal frame deflection ● Durable, wear-resistant and very quiet hydraulic clutch ● Casting slide with vibration dampening properties (ECS series) ● 4-fold slide guiding for a high tilting rigidity ● Hydraulic overload protection ● Production time as of 12 weeks

SIMPAC presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality. Overview: ● Press capacity: 8,000 - 30,000 kN ● Part size: medium to large ● Slide kinematics: servo (freely programmable) ● Applications: stamping, cutting, bending, embossing, drawing, integration of subsequent processes Features and benefits: ● Dynamic processes thanks to the use of torque motors that deliver high torque even at low speeds ● Maximum production flexibility through free programmability of slide movement, (forming) speed and stroke lenths ● Significantly more output compared to conventionally driven presses due to reversing pendulum movement of the slide ● Very solid, FEM-calculated and low stress annealed press body

The Scotch-Yoke drive of the DTL series has a modified link drive characteristic and reduces the slide speed during the forming phase. Thus the presses are not only suitable for cutting, punching and forming tasks, but also for drawing operations. The extra time that the material receives for plastic flow significantly increases the quality of the produced parts. The reduced impact speed of the slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press and die and ensure a constant part quality. ● The automatic centralized lubrication system increases pro-ductivity and availability.

SIMPAC presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality. Overview: ● Press capacity: 3,000 - 10,000 kN ● Part size: small to medium ● Slide kinematics: servo (freely programmable) ● Application: stamping, cutting, bending, embossing, drawing, integration of subsequent processes Features and benefits: ● Dynamic processes through the use of torque motors that provide high torque even at low speeds ● Maximum production flexibility due to freely programmable slide movement, slide velocity and stroke length ● Significantly higher output compared to conventionally driven presses due to reversing pendulum movement of the slide ● Very solid, FEM-calculated and low stress annealed press body

The eccentric drive of the DTE series is primarily suited for cutting, blanking, forming and embossing operations. Its characteristic sinusoidal slide motion curve makes it ideal for flat and semi-flat parts. The proven and continuously optimized technology ensures reliable production processes. Overview: ● Type: Eccentric presses ● Press capacity: 8,000 - 25,000 kN ● Part size: large ● Slide kinematics: crank / eccentric motion ● Application: as a single press system either as progdie or transfer mode, as well as a press line Features and benefits: ● High part quality due to rigid, FEM-optimized press design ● The outside located pressure points and a long 8-fold slide guiding system absorbe off-center loads, spare press and die and ensure a constant part quality ● Extensive range of optional equipment, such as die cushions, pneumatic ejectors or moving bolsters for a faster die change

With press capacities between 15 and 500 MN, Siempelkamp's closed-die forging presses oer the optimal solution for numerous application areas. The optimal relationship between press dimension and press force oers our customers maximum benets. Best process and system parameters are the guarantee for high dimensional and repeat accuracy. Siempelkamp supplies hydraulic closed-die forging presses for many dierent application areas. According to the application area, guidance accuracy, cycle time, eccentricity, and speed are optimally adjusted with one another. Depending on the customers' requirement, Siempelkamp's closed-die forging presses are available in dierent designs - as push down and pulldown presses. If desired we can supply these presses as part of a complete solution, from the press segment to the forging plant.

Our open-die forging presses play an important part among the forming presses. Siempelkamp supplies complete open-die forging presses equipped with manipulators and ancillary equipment such as lifting turntables and quite a number of additional components. Our presses operate reliably, fast and precisely, operating at pressing forces between 10 and 160 MN. The range of presses available comprise push-down or pull-down designs, two- or fourcolumn designs with oil-hydraulic or water-hydraulic drives. High-stroke frequency contributes to the eciency of these presses. Our customers produce bars, discs, rings, and anges from materials such as steel, high-alloy steel, nickel-based alloys, titanium, and aluminium on these presses. They prefer to order turn-key plants including integrated manipulators, turntable, die magazine, and die-changing system.

TYP D 020 Automotive Press for pressing of rivet nuts, connectors, etc. Usage To reline of these connectors Automotive Press was formerly developed. Meanwhile, this device will multiply its application when it comes to press- fit components into the PCB (eg connectors). Also for joining several PCBs or PCB components, the press can be used. Operation Through the use of different tool inserts, which can be easily replaced in the nut tool, different assembly operations can be greatly facilitated, that have often been carried out laboriously on a toggle press. Due to the size of the motor press D 020 can be permanently mounted in the workplace or on a mounting bereitgestelllt car. The operation is simple: the circuit board is inserted with the part to be pressed in the operating range of the device against the stop. Then a limit switch triggers the workflow. By a nearly closed guard is no danger to the operator.

The ultra-thin board package consists of a special cylinder conguration with additional double-acting cylinders. Its concept enables the production of ultra-thin engineered boards in a reliable and stable process. A standard ContiRoll® has a degassing zone in its front section. Double-acting cylinders serve to lift the sides of the press gap to enable a controlled degassing. Since ultra-thin boards are produced at especially high speeds, this standard degassing zone is not long enough for the mat to degas. The optional ultra-thin board package includes additional dierential cylinders functioning as double-acting cylinders to extend the degassing zone signicantly. Dierential cylinders in the remaining part of the press ensure that the upper and the lower steel belts do not make contact during ultra-thin board production, even if there were no mat in-between. Features Additional dierential cylinders operating as double-acting cylinders

Roll Compactor The roll compactor plant – the solution for low-dust products With our roller compactor plants powdered components especially low in dust can be condensed into granulate. In this case, several components with divergent properties can be mixed and granulated together. This way our roller compactor plant allows an efficient complete production of granulates from powder mixtures. The plants used at Ebbecke Verfahrenstechnik are equipped with pre-and fine granulators, while at the same time fine particles are fed back via post-screening. All granulation plants are continuously adjustable in their pressing force, in addition part of the plants are equipped with pre-compression by means of a vacuum intake. Technical data Granulation performance: 5 - 500 kg/h Product intake by means of: Pre-compressor screw (two-step) and vacuum intake (partial) Product-contacting parts: Stainless steel Feeding from: Big Bag, oktabin, bagged goods, cardboard boxes, drums Platform const

Design and production of press-systems for the rubber industry is one major core competences of Siempelkamp More than 100 years of experience in rubber press lines More than 100 years ago, we put in operation the first conveyor belt press on the market. Only 20 years later, the first large vulcanizing press with a closed frame construction went successfully in operation. Even today, our presses and systems for the rubber industry have unqiue advantages: Durability, speed, high availability and efficiency, which are the most important arguments for our customers to choose a Siempelkamp plant. Proven technology that is trusted in the rubber industry With our broad expertise in the fields of rubber processing industry, we are the world market leader for steel cord and conveyor belt presses. A large part of the conveyor belts used around the world are manufactured on our equipment. Despite heavy loads, these conveyor belts always have to have best straight-running stability.

STAR high quality bending film / folding foil is a high quality product, which offers best protection for parts and press brake tools on nearly every press brake machine. It is tested and developed under most difficult conditions. Test our high quality bending film / folding foil / antiscratch film and see, how you can protect your press brake tools, your bended parts and save money by saving time and avoiding extra work! Avoid following problems : Scratches imprints marks other problems caused by the direct contact from press brake tool and part extra work to clean the part after having scratches, imprints or marks scratches on press brake tools

For more than 25 years our name has stood for experience, professional competence and consumer-orientated service. Moreover, our clients hold the opinion that our skills in producing multi-part press tools and fixture constructions are absolutely convincing. These tools are implied for instance within the framework of electronic and automotive industry in favour of processing different materials. Thus, your needs will be developed gradually. By using up-to-date software we produce high standard multi-part press tools for national and international clients. With the professional help of the CAD/CAM-Software (Cimatron) we generate 3D-construcions and solids. For data migration we offer several interfaces: Step – DWG – IGES – DXF – just choose what you need. Immediate interfaces that lead directly from the CAD-workstation to the machine ensure shortest processing times.

Due to our 25 years of experience we are able to produce high-class qualities on favourable terms in the field of tool manufacturing as well. You are looking for the optimal tool, that matches your needs and that keeps your costs low even in the long term? No matter whether we are assigned by automotive, electric or any other sector of industry: we are your tool partners! Let us counsel you individually and you will profit with our nice price-performance ratio soon. Besides multi-part press tools and by using modern CAD-techniques cutting tools we produce deep drawn tools, bending tools and fixture constructions for stamping, bending and drawing parts with a press capacity up to 2800 kN and a sheet thickness of 4.0 mm. Screw threads can be formed non-cuttingly up to M12 during the stamping process. Our tool maker craft tools routinely and professionally that bare a high complexity. Because we can use our experience of long duration in manufacturing precise tools, ...

We accept responsibility for the whole process of production. On the one hand, we set outsourced items or provided parts like Press-in bolts Clinch studs Ball studs Weld screws Weld nuts into complex assembly groups. On the other hand, we offer downstream services like Thread cutting Slide grinding Defatting Special packing operations (in trays / blister packaging, wound on spool, packed in layers) Your needs and wishes always have priority and always will have. For that purpose we cooperate with reliable suppliers, who take charge of downstream surface treatment like: Galvanising Chrome-plating KTL-coating Silver-plating Hardening Press tempering Powder coating On your wish we guarantee particle purity and silicone-free packing.

Toothing is a frequent design element. They are complex in geometry, and their manufacture requires heavy machine use. Previously, toothed parts were mainly manufactured in a cutting process with a finishing process that followed the heat treatment stage. But we produce toothed parts in a cold-form process, thus providing the following benefits: customer-specific external geometries greater endurance strength greater mechanical load resistance press-smooth surfaces high accuracy of shape and position saving on materials