Testing - Import export

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

You can find the gas concentration needed for each device in the user's manual. There are additional costs for shipping by air freight. We recommend using the test gas set or a sampling valve.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Application The NTS is designed for testing and servicing fuel injectors of large diesel engines. Use NTS for examining the spray pattern, for leak testing of the needle seating and for. Features The infinitely adjustable testing pressure is is generated by means of an air powered double acting high pressure pump. The attachment for clamping the fuel injector is of rigid design and swivel-mounted so that the injector can be turned to horizontal position for ease of servicing. The transparent container for collecting the testing liquid is provided with an outlet for removing the liquid by suction.

The NDIR emitter kit made by Micro-Hybrid is a set of the most frequently used IR-emitters of the JSIR 350 series and a CO2 IR-detector of the MTS 200 series ith this set you get a possibility to order smaller quantities available at short notice and evaluate our products or test different combinations of components in your measurement system. This set may also help you to design your setup. Our bundle can otherwise come into use for educational purposes on colleges and universities for electronic and measurement applications training or single use assemblies for bachelor or master theses. In Addition engineers may use it for testing different set ups and preseries products or prototypes.

Testing

Dimensional Analysis

Testing & Certification of welded structures and electrical conductors

Testing

Scan & Reconstruction

Producing test specimens for adhesive tape tests is another strength of ours. We manufacture the right test specimen for you from all common materials according to FINAT, AFERA or EN 1939. Plastic test specimens Injection molding test specimens, 150 x 50 mm, 200 x 50 mm With polished class-A finish With structured surface, brushed similar to the A.F.E.R.A standard 4001 Grained with various degrees of surface roughness Various plastics, 200 x 50 mm (for tests according to the FINAT standard)

We develop and build test stands for pumps and can refer to several references in this field. In addition, we build press-off facilities and design them individually, including suitable risk assessment. Our process visualisation is suitable for customer presentations of the running pumps directly at the pump test stand. In addition, Merecs Engineering provides the connection to the IT infrastructure of our customers (ERP systems or databases). - Planning, calculations and construction - Coordination of suppliers - LabVIEW software development - NI-Real-Time & FPGA for high-speed evaluation of speed and acceleration measurement values - Vibration analysis via FFT (updated live) - LabVIEW, NI-cRIO and Siemens S7-1500 PLC in combination possible - Database connection - On-site assembly and IB

We develop fully automatic test systems for inclination sensors and inertial sensors (MEMS, tilt sensors) according to customer requirements. With these systems, combined temperature and motion simulation is possible. We set quality standards with rate tables from Acutronic, for example. With the help of multi-axis rate tables, we can precisely position DUTs in end-of-line (EoL) test operations or for development purposes and calibrate and test them under temperatures of e.g. -40°C and up to 120°C. Merecs Engineering can also connect the test system to our customer's IT infrastructure, set up databases and automatic data analysis using Mircosoft PowerBI, so that important key figures such as First Pass Yield (FPY), process capability, system availability, statistics and trends are continuously updated and displayed on online dashboards. For example, more than 100 DUTs are possible per test run.

We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design - Risk assessment and CE - Commissioning, service, maintenance at home and abroad

There are several steps to be taken for a successful test and for this to work in a targeted and efficient manner, a lot of planning and preparation is necessary. We therefore create the following from your ideas or your order: the data specification, including measurement uncertainty requirement; the test concept; Design of experiments; the specifications for test bench and measurement technology; the specification for the test specimen; Implementation planning.

We will help you with your experiment. Whether you need classic personnel support to complete the test crew or need support for specific test tasks: We can help you with: Assumption of certain functions, e.g. test engineer or measurement technician; Assumption of certain tasks, e.g. online monitoring, or daily data validation; Provision of additional measurement technology. Do you still need some resources for your test? We will find the right solution for you: Testbed; Instrumentation; Ancillary systems (e.g. cooling units or heaters); Test Specimen / Test Vehicle; Test Personnel.

With the dual chamber PPM leak test stand, Poppe + Potthoff Maschinenbau offers a powerful system for testing sensors in medical device industry. The test stand can be implemented in R&D processes, but also during production as an end of line test. With pressures of up to 50 bars this equipment offers a large spectrum of testing opportunities in the medical area. Some Global Test Standards include: ISO 14644 ASTM G122-96 ASTM D6361 SAE AMS 0302 The PPM leak test stand is able to be programed to the customers requirement. The powerful in house built software enables exact design of pressure curves, such as holding times and exact pressure increase over time. It is an ideal solution for any sorts of plastic components. This exemplarily displayed test bench can utilize air or nitrogen as a test medium. Please get in touch about any other test mediums. In addition the PPM test benches can perform tests of multiple test units at a time.

The Poppe + Potthoff impulse test stands test the operating or fatigue strength of various metal and plastic components. The endurance test in our high-pressure test systems simulates the life-cycle under varying loads. The failure tests thus show the potential weaknesses of the components with respect to design and material. The pressure is optionally modulated as a sine wave, trapezoid curve or needle pulse. Our test stands are characterized by a special ergonomics and are designed by Poppe + Potthoff machine design. Due to our flexible modular design, our machines are very variable, so that the pressure and volume range is designed according to the customer’s requirements. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

Uses for precision high-tech product accessories.

Stainless steel custom screws.

These parts are used for printer accessories.

Machine parts processing.

Dimensions Width 2.30m Length 2.30m Height 2.45m Square meters 5.29m² This offer includes 1x porter container with 1x entrance door, 2x window Insulation with 80 mm mineral wool roof insulation, 50 mm PUR wall insulation. Forklift guides included for easy unloading with a forklift. PVC vinyl floor covering 23mm durable and easy to clean. Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and other colors according to your specifications at short notice. In addition, you can order the following Flow heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Heating wall (incl. installation, cable & cable duct with socket) 280 € Frost Guard €45 Urinal (incl. installation & sealing) 400 € Desired color for complete paintwork (incl. processing) 750 € The prices does not include VAT.