Voltage regulator - Import export

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

✓ Outdoor AC/DC UPS for extreme environments in robust aluminium housing with IP65 protection ✓ Already integrated LiFePO4 energy storage (330 Wh) ✓ Temperature range -20…+50 °C ✓ Intelligent input current regulation ✓ Regulated output voltage in battery mode ✓ Pressure compensation element to prevent condensation inside ✓ Input and output cable firmly installed ✓ IEC/EN 62040-1 certified ✓ Optionally available: mounting sets for masts AC-DC UPS with IP65 protection class for outdoor applications The UPSI-2406IP-38AC is an AC/DC UPS system with numerous digital features and a high performance. The UPSI-2406 is used with an upstream AC/DC converter and combined with an already integrated LiFePO4 energy storage. The primary use of the UPS is in bridging power failures and/or fluctuations. The application to be protected is connected to the output of the UPS. The device has IP65 protection and was specially designed for use under extreme conditions.

✓ Powerful 24 V DC USV (DIN rail version) ✓ Integrated Supercap Pack 13,5kJ ✓ Up to 500 000 cycles ✓ Intelligent input current detection ✓ Regulated output voltage in battery mode ✓ Minimum load detection ✓ Power-fail timer function ✓ Relay dry contact on power fail ✓ Reboot function ✓ Fuel gauge ✓ Shutdown via external signal ✓ Operating temperature range -20°…+70°C ✓ Extended functionality by UPScom management software ✓ 3 years warranty The compact DC UPS modules UPSI-2412DP2 in a robust DIN rail housing are ideally suited for long-term use in control cabinet applications and decentralized solutions for protecting embedded industrial PCs, controls, motor drives, sensors, measurement devices, safety technology and many more. The UPS comes with USB & RS232 interface and provides a capacity of 13.5kJ in up to 500,000 cycles. Extended functionality is available via the UPSGen2 configuration software.

It is easy to operate with a recoil start function that provides quick activation. Fuel consumption is low because the variable speed control adjusts engine speed according to load conditions. In addition, the generator can be connected to another and used in parallel to increase overall power capacity without the need for a larger generator. Features: -traction starter -Large fuel tank 10 liters ( run time up to 12 hours) -Engine oil level monitor -Overheating protection -Silenced hood CE compliant noise level -Sockets -Electric key start 12 V -Automatic voltage regulation AVR -Inverter technology, stable voltage and frequency -Instrumentation, voltmeter, hour meter -Circuit breaker -wheels -Motor alarm: low oil level -overload -Intelligent speed control for fuel efficiency -Connections for parallel operation

Galvanic non-isolated LED Display Rugged construction Over temperature protection Input filter versus disturbances of thyristors drives up to 400V Wide input voltage range Regulated output Dual output voltage (12VDC and 24VDC)

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time Safety acc. to EN60950, EN60335 EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Mounting in flush device box (Ø 60mm, depth 42mm) Optional – on request: Customized cable length or mains cable Optional – on request: Output power: 20Watts and more Optional – on request: Combined variant with connector and cable Optional – on request: Customized output voltages Optional – on request: Current regulated version for LED applications

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Optional, on request: Customized cable length or mains cable Optional, on request: Output power: 20Watts and more Optional, on request: Combined variant with connector and cable Optional, on request: Customized output voltages Optional, on request: Current regulated version for LED application

"LT UP" Characteristics LT UP: Current- and voltage regulation within one device, compact design, continuously short circuit proof, Overload protection, over temperature protection, No Load Protection, Powerfactor >0,5C, Lifetime: 60.000 at 35°C ambient temperature, DC-operation possible, without DIMMbox connection. •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: connecting bracket 0,5...1,5 mm² •Humidity: 10%- 95% •Working temperature: -20°C - 45°C •Storage temperature: -40°C - 70°C •Standard 1: EN61347-2-13 •Standard: IEC61347-1 •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Unit: LED •DC output: connecting bracket 0,5...1,5 mm² •Input current: 150 / 200 mA •Input tolerance: ±10% •Input voltage: 220-240 V •IP rating: IP20 •Protection Class: II

For inexpensive dimming of light bands or multiple lights respectively with the same dimming level in cc-mode Central switching unit for all FRIWO drivers of the LT series with 1 - 10 V input Control range: 10 - 100 % and Off 0 % Dimming per 1 - 10 V Output voltage of 13 V @ 100 mA to supply an external sensor Additional PWM input to regulate the output voltage (TTL level 0 V - 5,5 V/frequency 1 kHz) IP20 Compact design Life cycle: 30,000 hrs at 45°C ambient temperature Number of connected LED drivers: 100 (max. lowerable current 100 mA).

General Characteristics of the brakes: 98/37/EEC Machine Instructions Regulation 73/23/EEC Low Voltage Regulation 93/68/EEC Electromagnetic Compatibility Regulation 60335-1-CEI Safety of electric devices for domestic use Regulation Regulation VDE 0580 Certificate UL/CSA File E210965 - EE219203 Certification ISO 9001:2010 95/16/CE: TÜV Institute Atex Ex Group II class 1 GD d T6 IIC in phase of certification nearby TUV SÜD 0123 New Machine Instructions 2006-42