Wedge - Import export

Motorized rotation Hydraulic wedge type expansion Highend arbor with double bearing Extremely stiff design SHDH Series PullOff Reel with manually adjustable brakes SHDR Series Payoff Reel with threephase motor Pneumatic or hydraulic hold down arms Electromotive or hydraulic traveling feature w optional automatic centering Hydraulic coil car and fullsize back plates Conical keeper rolls w optional motorized travel Larger mandrel heights and segments Vectorcontrolled drive systems for heavy coil weights Servo drive and control systems, etc.

Doppler Radar true-ground-speed Sensor

The secutex material may be sawn using a conventional band saw. The material will attempt to resist the cutting tool. Use as low a wedge angle as possible and, if necessary, adjust the cutting speed.

Wedge sockets for civil engineering (wedge sockets for slurry wall grabs) with countersunk or overlapping pin Rope-Ø Load Wedge h3 h4 r s kN Item-No. 22 125 BBK 0022 00 000 000 191 144 11.6 31 24 125 BBK 0024 00 000 000 189.5 144 12.6 31 26 220 BBK 0026 00 000 000 229 175 3.6 36 28 220 BBK 0028 00 000 000 226 175 14.7 36 30 250 BBK 0030 00 000 000 261 200 15.8 41 32 250 BBK 0032 00 000 000 260 200 16.8 41 34 310 BBK 0034 00 000 000 285 227 18 48 36 310 BBK 0036 00 000 000 284 227 20 48 Rope-Ø Load Pin (countersunk) d2 d3 h5 t Wedge sockets complete kN Item-No. with countersunk pin 22 125 BBB 2224 00 000 000 48 58 95 30 BBT 0022 KB 000 000 24 125 BBB 2224 00 000 000 48 58 95 30 BBT 0024 KB 000 000 26 220 BBB 2628 00 000 000 55 65 111 35 BBT 0026 KB 000 000 28 220 BBB 2628 00 000 000 55 65 111 35 BBT 0028 KB 000 000 30 250 BBB 3032 00 000 000 62 74 125 35 BBT 0030 KB 000 000 32 250 BBB 3032 00 000 000 62 74 125 35 BBT 0032 KB 000 000 34 310 BBB 3436 00 000 000 62 74 133 35 BBT 0034 KB 000 000 36 310 BBB 3436 00 000 000 62 74 133 35 BBT 0036 KB 000 000 Rope-Ø Load Pin (overlapping) d4 h6 m n Wedge sockets complete kN Item-No. with overlapping pin 22 125 - - - - - - 24 125 - - - - - - 26 220 BHB 2628 00 000 000 55 164 49 65 BHT 0026 KB 000 000 28 220 BHB 2628 00 000 000 55 164 49 65 BHT 0028 KB 000 000 30 250 BHB 3032 00 000 000 62 177 49 74 BHT 0030 KB 000 000 32 250 BHB 3032 00 000 000 62 177 49 74 BHT 0032 KB 000 000 34 310 BHB 3436 00 000 000 62 186 50 75 BHT 0034 KB 000 000 36 310 BHB 3436 00 000 000 62 186 50 75 BHT 0036 KB 000 000 Please find certificates and instructions in our download area:

alternative (short) fixing-kit for Conti Polyflat and polyrope on request material socket housing: G20Mn5 material wedge: 226D

Fixing-kit with wedge for Conti Polyflat and Polyrope optional with pin galvanized surface With type testing similar to EN 13411-6 material socke housingt: G20Mn5 material wedge: 226D material pin: 8.8 Please find certificates and instructions in our download area:

Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area:

Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN

Wedge sockets according to DIN EN 13411-6 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. 1= pin with split-pin, please find further technical information under " accessories for wedge sockets". 2= threaded pin with counter-nut and split-pin, please find further technical information under " accessories for wedge sockets". * hot-dip galvanized surface ** yellow-galvanized surface (for a better distinction from similar parts acc. to DIN 43148, hot-dip galvanized, yet made from other material) *** longer strap for a better assembly of ropes Ø 31/32 mm Please find certificates and instructions in our download area:

Wedge sockets for open line construction, telecommunications and hang down the lightning hot-dip galvanized surface Can also be used for counter ropes and stretching wires. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. KK2 0203 00 000 148 KK2 0405 00 000 148 * out of standard ATTENTION: Depending on exploitation of tolerances, certain difficulties may occur upon assembly of 7,5mm diameter ropes. Please find certificates and instructions in our download area:

Wedge sockets acc. to DIN 43148 hot-dip galvanized surface The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * out of standard Please find certificates and instructions in our download area:

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets acc. to DIN 43148 are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Rope suspensions with wedge sockets acc. to DIN EN 13411-6 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 18 mm rope diameter and an eye bolts length of 800 mm: KK2 1800 A0 800 411

Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148

Pins, washers and split-pins for wedge sockets acc. to DIN EN 13411-6 galvanized surface *material: ST

Pins, washers and split-pins for wedge sockets acc. to DIN 43148 galvanized surface

Slot wedge basket made of PA66 GF35

Technical data Design Gate valve, with internal spindle, acc. to DIN 3352/4A, soft sealing, maintenance free. For the use of process water and wastewater. Features • The inside and outside surfaces of the valve are FBE-coated. • In case of leakage of the stem seals, the seals can be replaced under media pressure. • Low dead space and the flat valve seat guarantee a great flow characteristic and prevent product deposition. • Bidirectional pressure discharge. • Permission and marking acc. to directive 97/23/EG (Pressure Equipment Directive) Face to face EN 558-1 Row 14 (former DIN 3202 F4) Connection Flange DN40 … DN150, PN16 drilled, Flange DN200 … DN400, PN10 drilled. Flanges DN65 – PN16 will be delivered in 4-hole execution! Mounting position vertical preferred Pressure Range PN10 … PN16, see table Temperature Range 0°C … +80°C Material Body: GGG-50, FBE-coated Stem: Stainless steel Wedge: GGG-40/Brass/EPDM (NBR on request) Stem seals: EPDM (NBR) The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

The wedge anchor is hammered into the borehole, with the expansion clip resting against the borehole wall due to its internal stress. When the nut is tightened, the cone pulls into the expansion clip, spreads it and presses it against the building material.