Industrial joints - Import export

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie exhaust expansion joint DN500 with a bend segment DP 0,5 bar DT 550° C ax. mov. +/-20 mm lat. mov. +/-20 mm

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie chamber expansion joints DN50 / DN150 / DN200 DP inside 6 bar DP outside 4,5 bar DT 155° C ax. mov. +/-15 mm lat. mov. +/-10 mm

Lubrication of closing devices and taps, as well as ground joints in industrial vacuum and laboratory equipment, if the consistency of other OKS silicone greases is insufficient Advantages and benefits No carbonization, no melting, steam pressure stays negligible up to +200°C Nearly constant consistency between -30 and +200°C No corrosive influence on metals and no softening influence on rubber and plastics Good resistance against solvents and excellent resistance against numerous chemical agents Resistive to cold and hot water, acetone, ethanol, ethylenglycole, glycerine and methanol, most of diluted bases and acids mineral and vegetable oils and numerous organic compounds and almost all usual gases

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie outside material: 2.4610 inside material: PTFE (s=5mm) DP 10 bar DT 230° C ax. mov. +/-30 mm

Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie DP 1,2 bar DT 143° C ax. mov. +/-18 mm lat. mov. +/-23 mm

EC Impulse Tools The TKa system wrenches are equal to the YEX-series, but with the added feature of a double chamber airmotor. The system wrenches with double chamber air motor achieve the required torque very quickly. The tools generate a high number of impulses per second, and therefore very accurate torques can be realized. Ontop of that, TKa series have lighter weight, can run on oil-free air and offer best ergonomics. TKa series can be delivered optionally with LED signalling instead of buzzer. Four strain gauges are positioned on the mainshaft, picking up the twisting torque on the main shaft at each impulse as close as possible to the socket. The electric signals are transmitted by induction through the internal and external coils. Due to this principle the Yokota transducer is very reliable, accurate and without wear. TKa system impulse wrenches perfectly qualify for documentation-liable tightening joints in industrial assembly. Applying reaction-free Yokota impulse...

Electronical Torque & Pulse Controller The VDI Directive 2862 for the use of Tightening Systems in the Automobile Industry is classifying bolt joints into three precise categories. The directive also is a guideline for the selection and the use of suitable assembly tools or tightening systems. According to the directive security related bolt joints shall be counted, documented and of course be tightened with the proper preload force. To achieve this Yokota equipped the impulse wrenches with an integrated transducer. In combination with Yokota's electronical controller YETC-210 torque values can be controlled, monitored and, of course, recorded. The also monitored pulse number refers as a second parameter. An exact parameterization to individual joint characteristic (soft/hard) is feasible. Yokota's YETC controller measures, judges, counts and documents all tightened joints and if neccessary, files them in a computer. Communication between the controller and the computer...

We produce expansion joints for all industrial sectors to take up vibrations, for noise absorption, or to compensate distortion by axial, lateral or angular movements. Our expansion joints are available in various versions and numerous elastomers variants in inner diameters from 25 mm to 1600 mm. Testing certificates of all well-known testing institutes are at hand. TYPE II Single or multiple flutes with rubber/fabric flange. Various elastomers qualities. ND 32 to ND 1600, Standard length n 250, 300 und 350 mm, Standard pressure stage 10 bar. TYPE V and TYPE VII Single wave with rubber sealing bead. Various elastomers qualities. ND 32 to ND 600. Standard pressure stage 10 bar. TYPE V Standard length 100 mm TYPE VII Standard length 130 mm HKS and HKA Per heating standard DIN 4809. COUPLING EXPANSION JOINT Single or multiple flutes, in various elastomers qualities. ND 25 – ND 750, any length for pressures from –0,8 to +15 bar, with clamping band. RUBBER-METAL PIPE...

Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc.

During the construction of an industrial facility, much attention is paid to the strength of the service pipelines fasteners. It is also necessary to provide reliable connection of all units of industrial equipment with the pipelines. In this case, it is not always possible The use of a permanent welded joint is not always possible, therefore, there are various types of weld-free tight joints. FLANGE JOINT COMPONENTS At present, one of the most effective connections used in industrial facilities is a flange joint. This is an airtight connection that provides high structural integrity, consists of two flanges, fasteners (studs or bolts, washers, nuts) and gaskets. An important matter in choosing a set of flanges is tightness. The gasket material must have good elasticity, strength, resistance to the operating temperature conditions and to the media with which direct contact is expected. For flange joints, Villina company uses the following types

Our connecting rod and forging parts have been widely applied around China engine manufacturers and World Top 500 Company and enjoyed a good reputation by its quality and reliability. Cummins is the largest enterprise in the world to design, produce and sell diesel engines and compressed natural gas engines. Cummins has invested more than 140 million US dollars in China, including Dongfeng Cummins diesel generator set and Chongqing Cummins diesel generator set, which are the largest foreign investors in China's engine industry. Cummins has eight joint ventures and wholly-owned manufacturing enterprises in China, among which Dongfeng Cummins produces B, C and l series diesel engines and Chongqing Cummins produces m, N and K series diesel engines. The products comply with ISO 3046, ISO 4001, ISO 8525, IEC 34-1, gb1105, GB / T 2820, CSH 22-2, VDE 0530 and YD / T 502-2000 technical requirements for diesel generator sets for communication.

NEMS electrical insulation insert is a one-piece pipe product serves to protect the pipeline from electrochemical corrosion in areas affected by stray currents. Installed -at the boundaries of sections of electrochemical protection of pipelines -on the borders of property plots -at the boundaries of pipeline sections with different types and quality of protective coatings or a significant change in the specific electrical resistance of the soil -for electrical separation of aboveground sections of pipelines with a length of more than 1000 m from underground sections -a method for identifying pipeline sections that are affected by stray currents, as well as inductive AC guidance -at integrated gas and oil treatment plants, booster compressor stations or tank farms Advantages -Withstand heavy mechanical loads -The service life corresponds to the service life of the gas pipeline -Installed on all categories of gas pipelines -Operating temperature +150 C and above