Injection compound - Import export

Lever gun based on our all steel grease gun with sealed container. 600ccm, thread M10x1. Effortless compression of epoxy and PU resins, into i.e cracks, with injection packer, achieves high pressure level. Lever Gun for Concrete Repair

Our patented material is highly suitable to produce foam moulds and RTM pressure injection moulds. Advantages: • Large volumes of more than 2500 kg can be cast in less than 45 min. • Good castability • Hardly measurable linear shrinkage • High temperature resistance • Demoulding process after approx. 90 min. (after adding the last backfilling compound) • Chemical adhesion to polyester or vinylester gelcoat • Immediately after the first mould half has cooled down, the second mould half can be prepared • Copper pipes keep the mould surface on a nearly constant temperature • Post-curing is not necessary ALWA MOULD D backfilling compounds are the fastest system on the market. For the surface you can chose between two gelcoats: 1) ALWA MOULD COAT This is a vinylester gelcoat that is especially suitable for high-end surfaces. It can be polished to high-gloss. 2) ALWA EPF 10 This is an epoxy gelcoat that is easy-to-use and is recommended for parts, where high-gloss surfaces are not needed

BIEGLO can offer PEEK granulates in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012G is high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021G is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085G is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. CoPEEK 125G is very low viscous, unreinforced PEEK for the injection molding of thin-walled, complex components. It is also suitable for the production of highly filled compounds.

BIEGLO can offer PEEK powders in various viscosities. It can be used for a variety of applications: semi-finished product extrusion, injection molding, compounding, filament and film extrusion, coatings. Our CoPEEK 012P is a high viscous, unreinforced PEEK for extrusion and injection molding, thus it is the standard type for the production of semi-finished products. CoPEEK 021P is medium viscous, unreinforced PEEK for injection molding. But it can also be extruded for the production of films and filaments. CoPEEK 085P is low viscous, unreinforced PEEK for the extrusion of films and filaments. It is also used as the basis for compounds and composites. Our CoPEEK can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C. BIEGLO CoPEEK is ISO 10993 certified for medical applications and also has FDA certification.

Addix, a French subsidiary of the axon' group, specialising in elastomer components. The company can offer moulded shapes for any application. Advantages Moulding of any parts : special O-rings plate cutting custom designed shapes Design of moulding tools Small, medium and large volume Moulded parts Transformation type : Transfer Compression Injection Compounds Aeronautics approved compounds (see the list) Other compounds (see the elastomeric chemical properties comparison table) Applications Military, aeronautics Medical applications Any market

The differentiating properties of Liquid Silicon Rubber (LSR) make LSR more widely and easily applicable than conventional silicones with high consistency and thermoplastic elastomers. Since its introduction in the 70’s, Liquid Silicon Rubber has grown into a material with a great variation of types and properties. In addition to the original use in niche applications, Enbi Plastics now uses the material in a wide range of industrial applications. Extensive developments in the making of new compounds, injection systems in combination with mold construction, and automating and guarding both production process and product quality, make LSR an appealing option for medical and food industries, household appliances, automotive, industrial and agricultural sectors. In this article, Enbi Plastics introduces to you the many possible uses of LSR per sector. Would you like to know more about the possibilities of LSR for your organization? Feel free to contact one of our experts.

Production starlim//sterner produces single and two component parts made of silicone using fully automated injection molding processes. Production takes place on our sites in Austria (Marchtrenk and Weisskirchen) and in Canada (London/Ontario). In Austria we run more than 200 injection molding, compound and 2K machines and in Canada more than 35. We deploy ENGEL brand machines with a clamping force range of 40 to 300 metric tons. The machines run in shifts: 365 days/year, 24 h. Micro-injection molding is a separate production unit. To meet special requirements of cleanliness/purity and hygiene starlim//sterner has a clean room meeting the following standards: ISO 14644-1 class 7 & 8 and GMP class C and D. Further processing of your products is possible. Several processing automats assemble, punch or slit the products according to customer's requirements. The starlim//sterner production environment represents the state of the art and is certified to meet industry standards. Using s

injection molding TPE compound,eco-friendly and recycable