Lift parts - Import export

Package Elevator It consists of a complete elevator to make it turnkey operational in the elevator shaft. Labor, assembly-installation, transportation and application project drawing for the municipality are not included. Reasons to Prefer Our Package Elevator Service Our expert staff offers the material to the service of our valued business partners by making a project suitable for the condition and intended use of the building. The elevator used in the correct package elevator selection shows high performance and provides efficiency suitable for the purpose.

Flow rate: 25 l/min. (explosion-proof) For mobile and stationary application Lutz horizontal eccentric screw pumps are suitable for pumping aqueous to highly viscous Newtonian and non-Newtonian media. The pumps are suitable for abrasive, solids containing and shear sensitive media, as well as for neutral, aggressive and easy fl ammable liquids under high delivery pressure. Features/Benefits: By positioning outside of the container it is possible to pump liquid out of the stacked containers - or containers which are not accessible from the top Due to the compact construction height, emptying at limited room height is possible Easy handling of heavy pumps No physical strain due to lifting Easy replacement of wearing parts by the new rotor/stator combination Fluid transfer is possible in either direction of rotation By replacing the rotor/stator unit, an easy change of size is possible Also available in PURE design Easy change of size A change between different stator materials is...

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Precision Auger Filling System with wide filling range without change part. Bottle lifted during filling for clean filling. Swingable Filling module for easy dismantle when cleaning. Contact parts are FDA Approved material and autoclavable. Patented Elevator cap sorter without vibration noise, less than 70dB. Cap closing torque are servo control for highest consistency. Auto rejection without machine stop. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Machine Specification

Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Precision Auger Filling System with wide filling range without change part. Bottle lifted during filling for clean filling. Swingable Filling module for easy dismantle when cleaning. Contact parts are FDA Approved material and autoclavable. Auto rejection without machine stop. Laminar Air Flow Booth. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere

Fast helper when storing goods and unloading trucks Good handling, thanks to the side lift directly from the operator's cab Particularly small turning radius thanks to practical rear steering Fast charging and high energy density, thanks to the innovative Li-Ion battery pack Grab handles, adjustable seat and intelligently placed steps for ergonomics Stepless lifting of the fork, thanks to the triplex lift mast Guaranteed spare parts supply and customer service

Fast helper when storing goods and unloading trucks Good handling, thanks to the side lift directly from the operator's cab Particularly small turning radius thanks to practical rear steering Fast charging and high energy density, thanks to the innovative Li-Ion battery pack Grab handles, adjustable seat and intelligently placed steps for ergonomics Stepless lifting of the fork, thanks to the triplex lift mast Guaranteed spare parts supply and customer service

Body shaping tights. Thanks to the special design of the panty part, they lift the buttocks and flatten the stomach. Made of single-covered yarn, which makes them extremely durable.

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Looking for handling equipment for your pipeline project? Use the Aerolift pipe handling equipment. Our custom-made lifting solutions are used for every part of the lifting process of line pipes. During production, storage, internal transport, transhipment, construction of the pipelines and even offshore. Improve the safe work environment Pipe lifting is often done by slings or hooks. Both methods which require manual attachment and detachment. This is no problem on ground level, but what if the line pipes are stacked up to several meters high? Someone must climb the stack, which is a very dangerous situation with great risk to life and limb. All Aerolift pipe handling equipment is designed to rule out this risk. Improving the safety of the work environment tremendously. However, this is not the only benefit. Most Aerolift lifting solutions are based on vacuum lifting technology. In our opining is vacuum handling the best lifting method there is.

KB Schmiedetechnik GmbH is a drop forge in West Germany, located between the historic “blade & metal region” Solingen-Remscheid-Wuppertal and the “Borussia soccer city” Dortmund, specialized in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications and standards: pressure equipment: valves, boiler systems, piping PED 97/23/EG, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering, certified by •American Bureau of Shipping (ABS) •Bureau Veritas (BV) •Det Norske Veritas (DNV) •Lloyds Register (LR) •Nippon KaijiKyōkai (ClassNK) Examples: components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pressure-bearing parts like valve bodies, pipe connections, and more.

In Case Of Fire | Warning Sign Static painted aluminum flat system panel 3mm clear acrylic with beveled edges Reverse UV printing lettering and shapes Dimensions : H:15 W:15 Produced in desired language and dimensions.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

10,000 PSI (700 BAR) INFINITY SERIES (ISP) AIR PUMP The SPX FLOW PA60A is an Infinity Stage Air Pump which increases productivity on the job by providing continuous pressure for up to 2x the speed of typical 2-stage pumps. Jobs get done faster and easier. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Light weight and portable: 77 lb (34.9 kg) [without oil] PA60APF5FP Light weight and portable: 88 lb (40.1 kg) [without oil] PA60APF5FMPR Removable control pendant (25 ft / 7.6 m) Removable 4" (100 mm), calibration-capable gauge CE ATEX Ex II 2 GDc T4 4 port manifold available to power up to 4 tools from a single pump (not for lifting applications) Fewer parts for lower service cost Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) retract relief valve pressure

Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength pressure-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable • Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released Available with and without manual lock.

This cat toilet is light and it is very easy to clean it thanks to the sieves in it. The only thing we need to do is lift the sieve part and shake it, then simply pour the litter in the trash. The product has three sieves in it. It is produced with high quality plastic. PetCraft is a pet accessory wholesale manufacturer that makes premium quality pet beds and other pet tools in Turkey. It is easy, cheap and hustle free to buy from the manufacturer. Product Size:15.25"Lx18.5"W Colour: Blue

Hot rolled angle is in demand and applicable in mechanical engineering, construction and in everyday life. It is used to make Concrete supports; Mounts; Brackets; Arches; Ladders, stepladders; Wall partitions; Armored doors; Fences and fences; Sports equipment and exercise equipment; Children's playgrounds (playgrounds); Lifting equipment; Steel structures ; Parts and assemblies (mechanical engineering). By the type of execution, it is rolled with equal edges (equal flanges) GOST 8509, with different edges (unequal flanges ) GOST 8510 and bent. An equal flange metal corner is rolled at Ukrainian factories of the established length 6 and 12 meters, the geometry of the shelf is from 25 to 300 mm, the thickness of the edge is from 3 mm or more. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

for vacuum lifting devices type CLAD-LIFT More functionality for the CLAD-LIFT with attaching parts and several oad handling attachments. Twin wheels, Lifting hook, Support wheels, Adapter 150° and 165°, Radio remote control, optical or acoustical alarm, Platform for forks, Solid rubber heavy load wheels, suction plates, extensions of traverses or other application. Twin wheels Give the CLAD-LIFT more stability and better handling on soft surfaces and reduces the point load pressure of the wheels to the floor surface. Lifting hook For transporting suspended loads on the CLAD-LIFT. The goods to be transported can be simply suspended with a loading belt or a chain. Support wheels To stabilize the CLAD-LIFT when assembling windows and glass doors. Improves safety when pivoting and rotating the load. Lifting fork Turns the CLAD-LIFT into a pallet truck for transporting pallets and other loadable goods. Ideal for loading and unloading vehicles without crane and forklift. Adapter...

The transport good can be fixed at the side and transported. For plates, glass panes, windows, doors and rear-end parts of camper. sample applications Pre-assembly of camper rear-end parts Vertical insertion of camper rear-end parts (100 kg lifting capacity). Glass lifter Typ AERO-Window Glass lifters for vertical transport of glass panes and window elements weighing up to 300kg. Glass panes can be turned +/- 90 in 45° intervals with the aid of a hand wheel.An electronic warning system with acoustic signal is used to monitor the vacuum and the power supplied to the vacuum lift.A manual sliding valve with safety interlock prevents supported window elements from being released inadvertently. to the Product page AERO window

How does vacuum handling work? Vacuum handling using suction cups is simple. A pump sucks in the vacuum between the suction cup and the part to be lifted, and stores this vacuum in a chamber dedicated for this purpose. By creating a vacuum, the atmospheric pressure is eliminated in the suction cup enclosure. The product is then pressed against the suction cup by this same atmospheric pressure of 1 kg/cm² (which varies from 950 to 1030 hectopascals); consequently, on a suction cup of 1 m² there is a pressure of 10,000 kg, making it capable of raising this same load. This physical phenomenon makes handling by suction cups an extremely efficient and reliable technique, capable of performing a very large number of handling operations.

GREEN-CLEAN Mini Vacuum the original! Under pressure principle for gentle vacuuming or lifting off of the finest particles. The particles removed are collected in a transparent, washable plastic container. Permanent high grade steel filters prevent the fine particles from escaping during the vacuuming process. This mini vacuum cleaner can be applied in those cases where dusting is not possible. The high pressure of Air Power PRO results in a suction strength similar to that of a 1 m high water column – even the smallest particles can be lifted from inaccessible component parts. Components not exposed to expansion pressure No direct contact with gas No whirling or extrusion of particles PICK UP protective tube – abrasion-free material Note: Please note: To use the Mini Vacuum for sensor cleaning, use the enclosed PickUp protective tube (SC-4050-3).

SRL elevator company from Turkiye offering complete elevator and escalators according to our customer’s projects. MRL Elevators Escalators Moving Walkway Passanger Elevators Hospital Elevators Freight Elevators Panoramic Elevators We’re also supplying elevator components ( cabin, doors, motor, control panel, guide rails, buttons,..) separately

Our company is one of the leading companies of elevator industry for 8 years. AKFALİFT elevator systems, high-tech products with fast and most appropriate prices and specializes in technical staff with Distribution Marketing and Export realizes. All of our products are of the best producers in our industry field. Our company also aims to provide high quality and long lasting spare parts. Since the establishment of our company until today, we have responded to customer needs in many issues besides selling products, sharing service and technical consultancy service to customer's service. AKFALİFT Lift Machine and Spare Parts always keeps customer satisfaction in the foreground and continues to present the latest technologies to our valued customers. We will always be with our customers to share the most experties.