Lip seals - Import export

Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

iglidur® sealing lip bearing d1 [mm]: Quick and easy-to-mount polymer bushing made of iglidur® J (JDSM) or iglidur® V400 (VDSM) with clip-on radial shaft seal ring as sealing for the rotating shaft. Seals off against dirt, dust as well as all pressure-less media. Polymer bushing with clip-on radial shaft seal ring Sealing for rotating shaft Temperature application range like iglidur® J Coefficient of friction only 10% higher than in iglidur® J Coefficients of friction identically exceptional like iglidur® J Reduced installation space as well as easy and simple mounting Realizable with numerous sealing types High-temperature option VDSM possible Temperatures till 150° C Material: iglidur® J High temperature option VATM, iglidur® V400 Seal ring made of fluorelastomer Bearing-sealing combinations for other applications on request When to use it? When the penetration of dirt and spray water should be prevented When only a small installation space is available in the axial direction When an existing seal should be integrated in a plain bearing When not to use it? When pressurized media should be sealed When absolute impermeability to the shaft and housing is needed continuously We'll gladly do the developing with you iglidur® sealing lip bearing d1 [mm]:

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips

Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

Inner ring, outer ring and rolling elements, bearing steel. Cage sheet steel. Labyrinth seal sheet steel. Lip seal NBR. Version 2Z = sealed both sides with noncontact labyrinth seals. 2RSR = sealed both sides with contact lip seals. Note Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease. The main dimensions of the deep groove ball bearings conform to DIN 6251. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 6204. These tolerance classes are standard and well suited for most applications.

Shower door seals, shower door seal UNIVERSAL LENGTH - Our shower sealing lip is suitable for doors up to 1m in length. Shower door seals, PERFECT FIT - The Vellure shower seal 6mm shower seal is available in 2 sizes. For glass thicknesses of 6mm and 8mm. These therefore fit perfectly and are easy to attach. UNIVERSAL LENGTH - Our shower sealing lip is suitable for doors up to 1m long. It can be easily cut to size and therefore fits perfectly into almost any shower door. Shower cubicle seal. 100% TIGHT - The shower lip seal for shower doors made of high-quality PVC is absolutely tight. Thanks to the pearling effect, the rubber seal optimally repels water from the shower seal glass door. EASY OPENING & CLOSING - Thanks to the soft rubber lip, the shower door opens and closes by itself. The shower lip seal seals a door gap of up to 1.2 cm. QUALITY PROMISE - Our shower seals are absolutely durable and look like new for a very long time. As a German premium

Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown

Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB

Optimized delivery with eyeliner and lip liner reservoirs Porex designs customized reservoirs for optimized delivery of any eyeliner, lip liner or lip gloss formulation. Made entirely from fiber or film sealed wraps, our lip and eyeliner reservoirs combine customized capillary structures with specially designed fiber blends to be compatible with a wide range of formulations.

Product information "Stand-up pouch, transparent / shiny gold" Stand-up pouch transparent / "shiny gold" with snap closure This stand-up pouch has two faces. The first side is clear. Your product can be seen over the entire surface. The second side is opaque shiny gold. This gives the bag a very elegant look and the customer can immediately recognize your goods. These stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored pasta, ground products, rice, salt, spices, decorative sand, powder, natural products, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 104µ Stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your stand-up pouches with your company logo or advertising slogan in up to 12 colours.

Product information "Stand-up pouches, clear transparent / shiny aluminium" Stand-up pouches front clear transparent / back silver aluminum with snap closure Show what you have. This bag is transparent on one side. This allows your customer to view the content as if through a shop window. Resealable stand-up pouches. Stand-up pouches guarantee optimal use in the food and non-food sectors. Our stand-up pouches are particularly suitable for filling flavored materials, tea, rice, electrical appliances, ground products such as salt, spices, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your stand-up pouches with your company logo or advertising slogan in up to 12 colours.

Product information "Stand-up pouches, transparent frozen matt / aluminum matt" Stand-up pouches Front side: semi-transparent (frosty - milky) / back side: matt aluminum If you want something different. This pouch has a matte finish on both sides. The front is equipped with a milky transparent film. The transparency is a little blurry. This effect is very nice and gives the product some coolness. The back is silver matt. Overall, in the literal sense, a well-rounded pouch. Stand-up pouches guarantee optimal use in the food sector. This stand-up pouch is particularly suitable for phone accessories, cases, the filling of flavored, ground products such as salt, spices, decorative sand, electronic materials, etc. Our stand-up pouches with pressure seal have rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable.

Product information "Stand-up pouches, matt transparent / frozen matt / frost milky" Stand-up pouches transparent/ matt "FROZEN" 130x225+70mm Stand-up pouches transparent PET with pressure lock, approx. 500ml/100g Stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, stable, odorless and reclosable. Stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your company logo or advertising slogan in up to eight colors on your stand-up pouches. If you are interested or have any questions, do not hesitate. Just give us a call on 030/ 405 719 40 or use our contact form. We are happy to help.

Product information "Stand-up pouches, matt transparent / frozen matt / frost milky" Stand-up pouches transparent/ matt "FROZEN" 160x270+80mm Stand-up pouches transparent PET with pressure lock, approx. 750ml/250g Stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, stable, odorless and reclosable. Stand-up pouches provide protection from air, moisture and UV rays Printing: We print your company logo or advertising slogan in up to eight colors on your stand-up pouches. If you are interested or have any questions, do not hesitate. Just give us a call on 030/ 405 719 40 or use our contact form. We are happy to help.

Black stand-up pouch suitable for many products. Due to the special properties and composition, optimal use in the self-service area is guaranteed. An instant hit on the shelves. The touch quite soft, but stand stable. Even if the bag is not completely full. These upright bags are particularly suitable for filling flavored and ground products such as salt, crystals, decorative sand, sweets, colored products, etc. However, non-food products are also packed in these bags. The stand-up pouch has a pressure closure and is therefore resealable and reusable. (this is usually not allowed for food, however) Our visually appealing black bag gives your product the final kick. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ

Thanks to their properties and composition, these yellow stand-up pouches guarantee optimal use in the self-service area. These standing bags are particularly suitable for filling flavored and ground products such as salt, spices, teas, decorative sand, sweets, etc. But non-food products are also often filled in these attractive and eye-catching bags. The stand-up pouch has a pressure closure and is therefore resealable. Our yellow sun bag will not leave your product out in the rain. If it does, the content is adequately protected. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays. Oppression: We print your bags with your desired motif or advertising slogan in up to 12 colours.

Due to their nature, the green stand-up pouches guarantee optimal use in the food sector. These standing bags are particularly suitable for filling flavored and ground products such as salt, spices, teas, decorative sand, sweets, etc. The stand-up pouch has a pressure closure and is therefore resealable. The green always has a natural touch. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays. Oppression: We print your bags with your desired motif or advertising slogan in up to 12 colours. Smaller editions can be stuck with labels. If you are interested or have any questions, do not hesitate. Just give us a call on 030/ 405 719 40 or use our contact form.

Product information "Stand-up pouches, blue with viewing window" Stand-up pouches blue "shiny" with viewing window The blue stand-up pouches guarantee optimal use in the food sector thanks to their properties. These stand-up pouches are particularly suitable for filling flavored and ground products such as salt, spices, teas, decorative sand, sweets, etc. The stand-up pouch has a pressure seal and is therefore resealable. The blue also creates a beautiful decorative look on the shelves. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays. Oppression: We print your stand-up pouches with your company logo or advertising slogan in up to 12 colours. Smaller editions can be stuck with labels.

Product information "Stand-up pouches, white matt with viewing window" Stand-up pouches white matt, with viewing window, with pressure lock We agree: One of the most beautiful pouches in our range. A white matte beauty with a window for your shiny product. These standing pouches showcase your product. Visibility for the customer is given by the integrated window. Show what you have. Despite the window, the product is protected against most environmental influences. Stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored, ground products such as salt, spices, decorative sand, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. The bags are resealable. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. Stand-up pouches provide protection from air, moisture and UV rays. 122µ, 250ml / 70g

Due to their nature, the green stand-up pouches guarantee optimal use in the food sector. These standing bags are particularly suitable for filling flavored and ground products such as salt, spices, teas, decorative sand, sweets, etc. The stand-up pouch has a pressure closure and is therefore resealable. The green always has a natural touch. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays. Oppression: We print your bags with your desired motif or advertising slogan in up to 12 colours. Smaller editions can be stuck with labels.

Product information "Stand-up pouch, red with viewing window" Stand-up pouch red / with oval viewing window and snap closure This stand-up pouch is opaque red with a well-proportioned oval viewing window. If you're looking for eye-catching packaging, this is it. These stand-up pouches guarantee optimal use in the food sector. Our stand-up pouches are particularly suitable for filling flavored pasta, ground products, rice, salt, spices, decorative sand, powder, natural products, etc. Our ziplock stand up pouches have rounded corners, tear notches and can be sealed above the sealing lip for tamper evidence. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays. Printing: We print your stand-up pouches with your company logo or advertising slogan in up to 12 colours. If you are interested or have any questions, do not hesitate.

Product information "Stand-up pouches, pink with viewing window" Stand-up pouches pink "shiny" with viewing window and pressure lock Thanks to their properties and composition, these pink stand-up pouches guarantee optimal use in the self-service area. An instant hit on the shelves. These standing bags are particularly suitable for filling flavored and ground products such as salt, crystals, decorative sand, sweets, etc. However, non-food products are also packed in these bags. The stand-up pouch has a pressure closure and is therefore resealable. Our pink stand-up pouch looks great, especially on light-colored shelves. Rounded corners give the bag a nice shape. Lateral tear notches make opening easier. The stand-up pouches can be sealed above the sealing lip to guarantee tampering. Material: This stand-up pouch is made of composite film, transparent, stable, odorless and resealable. 122µ Stand-up pouches provide protection from air, moisture and UV rays.

Product information "Stand-up pouches, black matt with aroma valve, high barrier" Stand-up pouches, coffee bags, aroma protection packaging: with valve, black matt, with pressure lock - High Barrier These stand-up pouches are the little black dress for your products. The matt black surface gives the bag a very elegant touch. You can be sure that this bag will not fail to impress when it is on the shelf! Your customers' attention is certain. Our stand-up pouches are standing pouches and are particularly suitable for filling flavored, ground, small-scale or powdered products such as salt, rice, spices, decorative sand and much more. These bags are often used for roasted coffee. But other uses are also possible. The valve lets the air out only from the inside. The snap closure makes the bag resealable. The bag also has rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence.