Low voltage transformers - Import export

"Our stock consists of about 100 transformers (low and high voltage) up to 3MVA that can be rented or sold. We find power transformers in different types of applications: in electrical transmission networks, in electrical distribution and in factories. Characteristics of low voltage transformers: - 2 types: isolation transformers and autotransformers - Three-phase dry-type transformers delivered up to 2000 kVA Mainly available in 230/400V or 400/400V or 400/500V or 400/690V - Other primary and secondary voltages on request - Stored as new up to 160 kVA - With or without IP20 protection cover - Aluminium or copper windings - Special design for particular application on request - Rental possibility: Our transformers can be rented for construction sites or for repair purposes."

impregnated and fully cured wide-meshed glass fabric.

alcali free glass cloth impregnated with a special silicon rubber.

electrical grade glass cloth impregnated with polyurethane resin.

glass cloth prepreg with high mechanical and chemical strength at high temperatures.

thermosetting NMN prepreg, both sides coated with a modified epoxy resin.

banding tape, consisting of unidirectional glass fibres coated with thermosetting Polyester resin in B-stage.

we carry a large selection of different PET films (Polyethylene Terephthalate) from leading manufacturers and can offer customised solutions for just about any application.

Laminates for wedges, strips and punched pieces in electrical machines and for e.g. barrier insulation in transformers.

we are an authorized distributor of DuPontTM Kapton® throughout Africa and Mexico. We will be happy to supply technical information and datasheets.

different carriers with acrylic (thermosetting or non curing) or polysiloxane (silicone) adhesive coatings.

water borne ovendrying impregnation varnish based on modified alkyd resin, environmentally compatible and water dilutable.

laminates with cellulose or cotton paper and PET-film. Thermal class 130°C, for slot and phase insulation in low voltage motors or as interlayer insulation in choke coils and small dry type transformers.

NM or NMN Laminates of Nomex® with PET film. Thermal class 155-180°C, for slot, layer and phase insulation for electrical motors, generators and transformers.

based on Kraft paper

Isopress paper and Isostrip bonded together with a special glue

high density presspan cellulose in boards

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc. They are produced OF upward cansting than Contunious processing and drawing.

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

Our ventilation systems ensure that an optimum air exchange is achieved within technical buildings (e.g. for cooling transformer and low voltage rooms) and prevent penetration by snow, rain and insects. Individual elements can be flexibly adapted to suit building conditions and are suitable for integration in both doors and walls. Designs: Standard surface: anodised aluminium E6 EV 1 silver Production in recommended sizes or to suit building conditions With a horizontal perforated sheet (for LLE) With integrated swirl chamber for use in conditions involving driving snow and high wind speeds (for LSU/LSO) Aerating coupling for continuous venting Ventilation domes Miniature ventilators Slide ventilators Options: Anodised, painted or powder-coated surface – choice of colours Slide plate for manual air flow control Ventilator units for forced ventilation and aeration All-round swirl frame Special version for Type LLE: break-in inhibiting WK3 conforming to DIN ENV 1627 Our DRO and...

"Our stock consists of about 40 transformers (low and high voltage) up to 3MVA that can be rented or sold. We find power transformers in different types of applications: in electrical transmission networks, in electrical distribution and in factories."

"Our stock consists of about 100 transformers (low and high voltage) up to 3MVA that can be rented or sold. We find power transformers in different types of applications: in electrical transmission networks, in electrical distribution and in factories. Characteristics of high voltage transformers: - 2 types of cooling: dry and oil - Transformers supplied up to 10MVA - Extra low loss design for the European market or other lossy design for export - Aluminium or copper windings - Special design for special application on request - Rental possibility: Our transformers can be rented for construction sites or for repair purposes."

Your reference product ABL6TS02B is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

-Rated voltage:380V -Rated insulation voltage:690V -1min power-frequency withstand voltage:2500V -Rated current:100A，200A，250A，315A，400A，500A，630A -Rated short-circuit breaking current:16、31.5、40、50kA -Shell protection level: IP33

-Rated Voltage(VAC): 400 -Rated Current(A):50/75/100/150/200/250 -Rated Capacity(kvar):±35/±52/±70/±104/±138/±173 -Input Voltage Range (VAC):400±20% -Rated Electrical Network Frequency (Hz):50±5% -Overload Current Multiples:1.2 -Working Efficiency:98.5 -Cooling Method:Forced Air Cooling -IP:IP44

-Rated insulation voltage: AC 660（1000）V -The rated power-frequency voltage -Main circuit :AC 380（660）V -Auxiliary circuit:AC 380、220、24V -DC:220、110V -Rated frequency:50（60）HZ -Horizontal bus rated current:≤4000A -Vertical bus rated current :1000A -Rated peak with stand current（ls):50（80）KA

CATEGORY : MAGNET ALTERNATOR, WIND TURBINE, WATER TURBINE 20,000 W PM ALTERNATOR 500 RPM - SUITABLE FOR WIND-WATER TURBINES --- PRODUCT INFORMATION Voltage: 220V/380V Hz : 50Hz Revolution : 500 Required torque at full power: 382 NM Weight :70 kg Working efficiency: 89% Desired load at full capacity: 26 HP --- PRODUCT FEATURES - High performance neodymium magnets - Maintenance-free and long-lasting operation feature with low cycle advantage - 20 years working life - High efficiency - Ability to work 24/7 without overheating