Packaging systems - Import export

flexible, simple, efficient minimum setup-time (< 30s ) = maximum flexibility wide range of bag sizes ( 50 x 50 mm - 400 x 800 mm) with many additional features external dosing-counting-weighing systems for small and big quantities

Logistic centers often work with automated package systems. If the goods slip back and forth, they will not stop in the packaging and the entire carton may fall off the conveyor belt. The solution: air cushion! They ensure reliable stablity.

Packaged Systems: Onshore

Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request Other information Series 10 Inner height hi: 18 mm Inner widths Bi: 15 - 100 mm bending radii R: 28 - 180 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 11.031 Inner height hi: 23 mm Inner width Bi: 31 mm Bending radii R: 45 - 70 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.080 Inner height hi: 28 mm Inner width Bi: 80 mm Bending radius R: 38 mm Pitch: 30.5 mm E-Chain®, not-to-be-opened Series 11.1/11.2 Inner height hi: 41 mm Inner widths Bi: 15 - 25 mm bending radii R: 40 - 100 mm Pitch: 30,5 mm E-Chain®, not-to-be-opened Series 14 Inner height hi: 20 mm Inner widths Bi: 15 - 50 mm bending radii R: 28 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15i Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B17i Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series F17 Inner height hi: 32 mm Inner height Bi: 15 mm Bending radii R: 48 mm Pitch: 30,5 mm E-Chain®, snap-open inside Series B15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, snap-open outside Series B17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 48 - 125 mm Pitch: 30,5 mm E-Chain®, snap-open outside E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links Assembly Instructions Application examples Applications in various industrial sectors. E2 mini One-/Two-piece E-Chain® Small pitch for silent operation High torsion resistance Double stop system and large pins for long service life Optimized weight/stability ratio Easy to mount Manifold interior separation Typical industrial sectors and applications Construction machinery Handling systems Installation Packaging machines Textile machines Vehicle construction Wood machines Glass machines Machine construction General mechanical engineering etc. UL94-V2 classifications Cleanroom class 1 (ISO class 3) Series 10 tested by Dryden Engineering Company, California Special version: Electrically conductive ESD/ATEX versions on request

chainflex® robot cables are used in energy chains or 3D applications. The twistable robot cables meet extremely high industrial stress requirements and score points with properties such as resistance to hydrolysis and microbes, UV resistance and many, many others. Different types of robot cable are available, e.g. hybrid cables, fibre optic cables (FOCs), motor cables and servo cables. Typical application areas: - For heavy duty applications - Almost unlimited resistance to oil - Indoor and outdoor applications with average solar radiation - Unsupported travel distances and up to 100 m for gliding applications - Machining centres / machine tools, storage and retrieval systems, packaging industry, handling, refrigerating

Latest generation machine suitable for RESTAURANTS, BUTCHERS, FOOD INDUSTRIES, TRACTORIES and wherever there is the need to vacuum pack both solid and liquid products The AUTOMATIC product recognition system allows you to switch from one production to another without having to change settings. Cooks who work in the kitchen know very well how problematic it is when multiple colleagues have to use the same machine and package different products The color keypad is extremely functional and allows you to change program and vacuum percentage in just a few seconds. Extremely easy to clean vacuum chamber and raised suction.

The CERTOPAC, a fully automatic high-performance bagging machine, packs any type of free-flowing bulk material in pillow bags and gusset bags with a filling weight between 5 kg and 80 kg. Thanks to its high speed, this open-mouth bagging machine can fill up to 1500 bags per hour. Because of the high flexibility of the packaging machine, bags made of woven PP, PE and paper can be processed. Furthermore, the CERTOPAC stands out due to its easy accessibility and high reliability. This high-performance packaging machine is also available as CERTOPAC-S and CERTOPAC-L in addition to the “standard version”. The differences between the variants are the bag magazines (rotating bag magazine or push magazine), the different filling weights and sizes of the bags. Furthermore, the CERTOPAC can also be completely made of stainless steel and equipped for powdery products.

The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products.

One box – countless possibilities! Packaging system for safe storage and transportation of tools during reconditioning Flexible for use with different tool lengths and diameters Ideal for sorting, organizing and transporting of tools

Multi-compartment packaging system for carbide inserts – one-piece version with 5 individual detachable hinged boxes Versatile packaging combining single unit with multiple packaging No packing and repacking of single units necessary Each unit is reusable with hinged lid and snap-closure

Multi-compartment packaging system with 10 individual detachable units for tap drills, burrs and shank tools Versatile packaging combining single unit with multiple packaging User-friendly and efficient due to detachable units No packing and repacking of single items necessary

Multi-compartment packaging system with 5 individual detachable units for taps, burrs and shank tools Versatile packaging combining single unit with multiple packaging User-friendly and efficient detachable units No packing and repacking of single items necessary

By providing not only a wide range of aluminum containers and aluminum lids but also packaging machines and technical support, OHLER Packaging Systems is able to offer a complete service to its customers. With more than 40 years of experience, OHLER plays a leading role as a food-industry partner for restaurants, caterers, kitchens, groceries and wholesalers, as well as airline food packaging.

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231? Each face width of a roller brush needed can be divided in a corresponding number of single, compact segments, called packages, that are not only loosley coiled spirals. What we produce are light and easy-to-handle packages with a constant high density which facilitates and accelerates the equipping of a brush core or shaft carried out by yourself.The welded package system is not only easy to mount but it also makes you independent of any transportation of the core to the supplier for refilling, packing, delivery times etc. and helps you out of emergency situations.For the core constructions the following materials are available: plastic-coated steel, steel, stainless steel (1.4301; 1.4571; 2.4879). The twin tape mounting is designed as a concave backing system where the coil widths (WB) ranges between...

Smart packaging, sales promotion and storage system in one solution – perfectly organized and safely stored Modular packaging, sales and organization system Sustainable packaging with the additional benefit of an organization system Wide product range to suit individual applications

Multi-compartment packaging system for carbide inserts – two-piece version with 5 individual detachable boxes Versatile packaging combining single unit with multiple packaging No packing and repacking of single units necessary Separate highly transparent lids snap into each middle and end position and provides therefore additional protection during opening/closing

Items that have initially been bagged using a machine from Hugo Beck often need to be shrunk so as to ensure a tight-fitting film and the perfect packaging finish to meet the highest standards. Adapted for each packaging system, we supply the appropriate shrink tunnel in all sizes and performance ranges for the production of high-quality shrink packaging. As such, we manufacture shrink tunnels in a number of versions, with a variety of rods and chains that operate like a link mesh belt. Textile mesh belts are also possible for very light products. In each case, the length of the shrink tunnel depends on the speed of packaging and on the film material selected. State-of-the-art air ducting and heat recovery ensure efficient energy use, helping us to contribute to both protection of the environment and reducing energy costs. The decision on whether to use a shrink tunnel with circulating air or convection principle is defined depending on the individual product application of the customer.

LMF JDN Low Headroom Trolleys The trolley for areas where headroom is restricted Carrying capacities: from 0,5 t up to 6,3 t When only very low headroom is available we recommend the JDN-Ultra-Low Monorail Hoists. Standard Features State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor Low-maintenance and low-wear operation of the motors by means of a reduction of components No additional motor lubrication required 2-step travelling speed Changeable track width * Advantages Able to negotiate curves Longer cross beams to improve the minimum headroom even with bulky loads Options Rack and pinion drive Spark-resistant package Offshore paint Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose Hose trolleys * Please contact us.

BS-5540M-ECO SHRINK TUNNEL - complete with wire mesh carpet for small products Shrink tunnel with high thermal insulation and ample power for all types of shrink film including the film in PE. Maximum thickness film thermoretracting 100 my. In conjunction with the angular sealer BS 8060 L is a complete system for packaging bags, bottles, cans and many other products with high weight. Of course it can be used separately or in combination with other machines. MAIN FEATURES - Finned heaters; - Dual fan for air circulation; - High thermal; - Conveyor belt with metallic mesh; - Conveyor with adjustable speed; - Fan for cooling packages; - Structure with wheels and adjustable feet.

Hugo Beck can claim a decade-long development tradition when it comes to automation. We offer support with our expertise throughout the entire automation process, from project planning and manufacture right through to integration into complex packaging lines. Handling systems such as portals, grouping solutions, stacking and counting devices, cross pusher to name but a few, are integrated reliably into the packaging solutions by our technicians. Furthermore, various robots systems are used across many industries for the automated feeding of products, helping to for example grip, position, stack, group, stage products. From a parallel robot (also known as a spider robot) all the way through to a SCARA robot – anything is flexibly possible and delivered fully integrated according to each customer‘s needs. Both robots and handling systems can all be purchased independently of Hugo Beck packaging machines.

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671

The surfaceCONTROL 2500 measuring system is used for defect detection on diffusely reflecting surfaces. In combination with robots, the surfaceCONTROL 2500 is used for fully automatic defect detection on body shells. This system works according to the method of fringe light projection. By means of a learning process, local form defects such as bumps, dents, etc. are reliably detected, while permissible deviations are tolerated. The surfaceCONTROL systems consist of sensor, robot, computer and software and interface package. Different versions of the system are available, which are configured according to customer-specific requirements. The number of reflectCONTROL sensors and robots required can be flexibly adapted to the required throughput.

The liquid product is first pumped into a reservoir tank, which is equipped with a load cell that measures the weight of the product. The operator then selects the desired weight and container size and places the empty pail on the filling platform. The machine will then dispense the product into the pail until the target weight is reached, at which point the machine will stop the flow of product and signal for the operator to remove the filled pail. The pail liquid weighing filling machine typically requires minimal operator intervention and can be programmed to fill a range of different container sizes and weights. This equipment provides a fast, accurate, and efficient method for filling pails with liquid products, making it an essential tool for many manufacturing and packaging operations. Features The system uses PLC, touch screen, safe and reliable Filling nozzle and pipe use quick coupling, convenient for removing and washing

Aluminum valve cups (sometimes also referred to as aluminum valve caps) are a mission-critical component for the dispensing solutions industry, represented primarily by aerosol cans. This specialized packaging is used across diverse markets including personal care, food, industrial, household and pharmaceutical. Novelis is a key global supplier to valve-cup manufacturers, ultimately supplying thousands of brands with high-quality and innovative dispensing solutions. Our basic objective is to ensure that our aluminum-valve-cup customers remain the preferred providers of innovative packaging, dispensing systems and solutions, consistently contributing to the success of their customers globally. Currently, Novelis products in coil form, like 5745 (H42) and 5052, with gauges (0.41 mm to 0.39 mm) and diverse widths, and coatings are helping them achieve their mission.

The semicontinuous TFi3000 for industrial use is not a compromise, but rather the combination of the benefits of two entirely different systems! It permits smoke, heat and cold treatments in a single production step. Automated work processes lower your operating costs while at the same time increasing production capacities. Efficient combination of Ti3000 & IKi3000 Production justintime, controllable and reproducible work processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

The TF3000 combines the Turbomat T3000 and the intensive cooling system IK3000 in a single closed system. This means one thing most of all Best output per chamber part for the shortest process times. The automated transport system not only reduces operating costs, but also increases production capacities in the system. Maximum output per chamber part Production justintime, controllable and reproducible processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

Introducing Logistic: Your Ultimate Packaging Solution Logistic, brought to you by Magmett, is a comprehensive and sophisticated packaging system designed to cater to the diverse needs and demands of our esteemed customers. With Logistic, we offer an array of packaging solutions that guarantee utmost convenience and efficiency. One of the key features of Logistic is its ability to facilitate the serial packaging of profiles of various types and lengths. Whether you require packaging for aluminum, steel, or any other material, our system ensures seamless and secure packaging, maintaining the integrity of your valuable products. At Magmett, we understand that each customer may have unique packaging requirements. Hence, Logistic offers packaging in special dimensions tailored to your specific needs. We are committed to providing packaging solutions that align perfectly with your expectations, ensuring maximum satisfaction.