Rigid tubes - Import export

360 °light-emitting neon tube Provide basic lighting and decorative lighting

PP barrel pump with rigid discharge tube. Barrel pumps made of polypropylene allow a fast transfer of liquids from barrels, canisters and tanks. The good chemical resistance of PP allows acids, alkalis and aggressive detergents to be transferred. The low-mounted non-return valve of the barrel pump and the immersion depth that can be steplessly adjusted using the barrel screw joints ensure good removal of residual liquid. The barrel screw joint fastens the barrel's pump securely to the barrel. Barrel screw joints and thread adapters for commercially available containers are available as optional accessories.

Barrel pump with rigid discharge tube with stopcock made of PTFE. Due to the high chemical resistance of the medium-contacting parts made of PTFE and FEP, even liquids which attack conventional materials such as PP or PVC can now be safely transferred (except for elemental fluorine) with this barrel pump. The barrel pump is also suitable for transferring ultra-pure liquids. The stopcock prevents hazardous vapours from escaping, and stops dripping after transfer.

Luxury rigid round tube packaging box. Hard grey board, offset printing and matt lamination. Lift off lid.

The world's largest motorized screen, up to 60m wide! From 8 to 60m wide. The black anodised extruded aluminium housing is fitted with longitudinal steel reinforcements that provide it's great rigidity. Aluminum roller tube supported along its entire length by a cradle made up of ball bearings and FLEX system.Tubular anti-bending system over the entire length. Color of the casing: black anodized. Installation onto a fixed theater pipe 48,3 to 50mm diameter (other fixing method on request). Tab Tensioned Screen Surface (optional). Most of our PVC fabrics can be fitted into this system. Integrated motorization 220V 2 Somfy motors with 5 years warranty. Motor torque: 110 Nm. Rotation speed: 17 revs/min. Rising speed: +/- 10 cm/sec. Equipped with 2 adjustable end stops. The Nolimit can be shipped in one piece up to a maximum of 12 metres wide, in a wooden box especially provided for this purpose.

These are specific materials for use in the thermoelectric sector and in thermo-mechanical applications. The range includes: Mica Continua Muscovite / Phlogopite is available in rigid or flexible sheets, tubes and / or shaped particles according to customer specifications. The main applications are in the following sectors: household appliances, packaging, lighting and electric heaters. Cementitious or calcium silicate based asbestos substitutes for all thermo-mechanical applications up to 1000 ° C Antistatic laminate to be used as a soldering template for printed circuits Misoglass1 / Deltherm1 have been designed to be used in all applications where thermal insulation is required under compressed conditions.

Spindle extension consisting of a rigid, hot-dip galvanized key rod and a separate, rigid PE protection tube. Square bars 13 × 13 mm, hot-dip galvanized. Operating square suitable for operating key DIN 3223 E (House connection fittings). Connecting pins in stainless steel v2a. Coupling sleeve made of iron GGG40, galvanised, with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent

The travelling circular knife machine CCM 6 cuts rigid profiles and tubes accurately to length. The CCM 6 achieves very long processing times of several seconds for excellent "final trim quality" thanks to a standard servo linear drive for the tool carrier, and at the same time extremely short cycle times of less than one second for machining short parts at high line speeds. Added to this is the servo linear drive for circular knife feed with different feed speeds for different material sections, e.g. a gentle material penetration or knife exit with low feed to reduce burr formation. High speed ranges As far as the knife speed is concerned, we offer you outstanding possibilities of alternatively 2,000 – 6,000 rpm or 4,000 – 12,000 rpm. This means that there are no limits to the use of various types of circular knives, including clamping and grinding in continuous operation. Our product videos will give you an insight into the machining process.

Heavy Duty Side Lever Grease Gun For 400 gr. Cartridges or 500 gr. Bulk Fill, Metered Output, Permanent Spring Load Design, Filler Nipple/Air Release Valve, Ergonomic Hand Grip.

Mato Lubrication Kit E480 contains: - Grease Gun E500, - Universal adaptor, - Steel Tube E4024, - extra safe rubber hose, - supplied with 4 jaw hydraulic coupler, - Rigid tube for driveshaft F4020, each with a snap-on coupling. Rigid tube with slide-on connector, Conical and Universal connector. Supplied in carry case.

Precision Hydraulic Coupler, 9” Flexible Hose and Snap on Adaptor. (Provides the facility for connecting a flexible extension hose and connector to rigid tube of a grease gun). Snap-On Flexible Extension Part No. 54 2048

Special Push Type Gun for oil, petroleum, aerosols and oil containing additives, black powder coated with rigid tube, universal and conical connector. Yellow protection cap. Pressure Capability - 150Bar (2200psi) Output: 0.5 cc's per stroke.

Side Lever Oil Gun, High Pressure 500cc Capacity, Screw Type Air Release Valve. Short Stroke delivery, special piston for use with oil. Rigid Tube 6" (150mm) and 4 jaw Precision Hydraulic Connector with Non-Return Valve Colour: Silver

Mini One Hand Grease Gun 85gr. Capacity. Its small size makes it easy to fit in a tool box. Dual Outlet for One Hand or Mini Side Lever Action. Pressure Capability: 200bar. With 4" (100mm) Rigid Tube and 4 jaw Standard Hydraulic Connector

For the 2N pipe connector, the pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place. This creates a friction-locked and tight pipe connection that can be released at any time, that eliminates dead volume in the design concept and also has no effect on the flow. The inside diameter of the connector does not correspond to the inside diameter of the pipe.

A semi rigid medium wall radiated tubing designed for applications to seal and protect electrical splices, cables and joints where electrical insulation and waterproofing are required. 3 1 shrink ratio allows it easily fit over irregular shape and large connectors. Shrink Ratio 3 1 Operating Temperature Range 55°C to 120°C

Flexible ducting helps in many ways in heating, ventilation and air conditioning systems: they can be used areas where rigid spiral tubing can not be used as it can easily be shaped and bent into position, work as a way as connecting opposing tubes, as well as allowing a channel in the extraction of air. The flexible ducting is capable of withstanding both high and low temperature which range from -30ºC to +140ºC - not all styles of flexible ducting is able to so is best to speak to an adviser. Lengths are are sold in 10 meter lengths and different styles which are suitable for different applications these include: aluminium, insulated, grey, acoustic and semi rigid flexible ducting.