Filters- liquid - Import export

WHFIT process filter housings are designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. WHFIT process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is filter head on top and filter bowl on bottom. Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Fluid group 1 on request.

AWS (Air-water supply) unit is an ideal solution for every gas/petrol station. It offers top quality supply with compressed air and water. High quality piston compressor with pressure vessel is surrounded by vandal protected stainless steel housing. Integrated AWS-C controller assures precise inflating of tyres and is user friendly.

Classical systems of the screw compressor have a regulated air cooling of the lubricating oil, which means that the excess heat is discharged into the ambient by the fan. In this way, the heat is completely lost. External heat recovery unit AirWatt is designed to efficiently exploit the waste heat, generated during compression of air in rotary screw compressors. Sometimes this represents more than 70% of the energy consumed by the rotary screw compressor for the operation. This heat can then be used to heat domestic water or for heating, at almost no additional costs. This does not only help save money but is also environmentally friendly. The unit has two separate piping systems with counterflow. Energy exchange from a compressor to sanitary water occurs in a plate heat exchanger, where compressor oil and sanitary water meets. The unit is controlled by a thermostatic valve, which prevents the compressor system from getting too cold and damaging the compressor.

B-AIR PLUS system is specifically designed for applications where high quality breathing air and monitoring of breathing air supply are needed. B-AIR PLUS is a combination of our B-AIR 0106 breathing air filter set combined with gas concentration analysers, fitted with pressure regulator and quick couplings, all packed in a compact and robust casing. Gas concentration analysers constantly monitor CO, CO₂ and O₂ concentrations and trigger an alarm if concentrations exceed the EN12021 and BS4275:1997 standard compliant values. In this way B-AIR PLUS can safely provide high quality breathing air for up to 5 people. Small dimensions and low weight enable the use of B-AIR PLUS in many applications as it can be transported and set up with ease.

B-AIR™ point of use filter set is designed for high efficient preparation of top quality breathing air. On request B-AIR™ filter set can be supplied with wall mounting brackets, pressure regulator and quick couplings. WARNING! Breathing air filter set B-AIR is not declared as CO₂ and CO removal filter. Despite that B-AIR comprises filter element which can reduce CO content.

PP pro paint system has been developed explicitly for purifying compressed air from solid, liquid and partially gaseous components. Protecting air equipment in addition to providing clean air for work. PP pro paint system is easy for a wall mount.

WOS CD is intended for systems, where amount of generated condensate exceeds capacity of single largest available WOS water oil separator. WOS CD can evenly distribute collected condensate between up to three WOS 35 water oil separators. WOS CD is equipped with flow distributor on the inlet port, up to 8 hose tail connections mounted on elbows for convenient outlet, manual ball valve for cleaning purpose and vent port for safe aeration. Optional wall mounting kit is available. Maximum capacity in regard to free air delivery, when connected to WOS-35 is 120 Nm3/min.

WOS water oil separators have been developed to separate lubricant oil from condensate from compressed air systems. WOS water-oil separator can be used in variety of applications. For applications not listed please contact us or your local distributor.

WOSm water oil separators have been developed to separate lubricant oil from condensate generated in compressed air systems. Due to patented technology regular service can be done in 30 seconds without any cleaning. Separation begins in “cyclonic depressurization chamber” and continues in “filter cartridge”. When the “filter cartridge” is fully saturated you just simply unscrew complete cartridge and replace it with new one. All the condensate stays in old cartridge which can also be sealed with plastic cover and disposed according to local directives and laws.

We are producing replacement filter elements according to ISO 8573-1. Alternative filters are tested by IUTA. Discover our range of replacement filters: ABAC, AGRE, AIRFILTER ENGINEERING, ALMIG, ALUP, ATLAS COPCO, ATS, BALMA, BEA, BEKO, BOGE, CECCATO, CHAUMECA, CHICAGO PNEUMATIC, CKD, COMPAIR, CTA, DELTECH, DOMNICK HUNTER, DONALDSON, EKOMAK, FIAC, FINITE, FUSHENG, HANKISON, HIROSS, HITACHI, INGERSOLL RAND, KAESER, KNOCKS, KOBELCO, KSI, MARK, MATTEI, MAUGUIERE, MIKROPOR, OMI, ORION, PNEUMATECH, PREVOST, PUSKA, SCHNEIDER, SMC, SPX NGF, SULLAIR, WALKER, WORTHINGTON CREYSSENSAC, ZANDER, ZONDER.

HPF process filters are designed for high pressure applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with 9 different grades of filter elements. HPF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is bowl on the top and filter head on the bottom. Fluid group 1 on request.

SF stainless steel sterile filters are designed for high-efficient sterile filtration of compressed air, process air and technical gasses. SF sterile filters provide high-efficient removal of sub-micron particles down to 0,01μm including microorganisms (bacteria). Filter housing surface is polished down to grade Ra0,8. Required compressed air quality according to standard ISO 8571-1 can be achieved with appropriate filter element. All components meet the FDA requirements for contact with food in accordance with the Code of Federal Regulations (CFR), title 21. Fluid group 1 on request.

SPF stainless steel sterile filter housings are specially designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with appropriate filter element. SPF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is filter head on the bottom and filter bowl on the top. Fluid group 1 on request.

PF process filters are designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with 9 different grades of filter elements. PF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For any other technical gas please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is bowl on the top and filter head on the bottom. Fluid group 1 on request.

WFIF welded stainless steel filter housings with flange connections are designed filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Fluid group 1 on request. Optional external condensate drains should be used for efficient condensate draining from filter housing.

WFIW welded stainless steel filter housings have been specifically developed for filtration of compressed air as well as many other gases (for list of suitable gasses please contact us or your local dealer) where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing. Fluid group 1 on request.

WFIT welded stainless steel filters with threaded connections are designed for protection of the downstream compressed air system and equipment against defects and other failures. They are used for filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing.Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

CHP carbon steel high pressure filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from high pressure compressed air systems up to 420 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drain should be used for efficient condensate draining from filter housing.

HF O2 series of filter housings have been specifically developed for high efficient removal of solid particles from compressed Oxygen applications.

HF filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from compressed air systems. To meet the required compressed air quality appropriate filter element (B, P, R, M, S, A) must be installed into filter housing. Optional external condensate drains should be used for efficient condensate draining from filter housing.

BF HP filters are designed for protection of the downstream compressed air system and equipment against defects and other failures in high pressure applications. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 25 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

M-VAC filters are designed for medical vacuum applications. Medical vacuum filters are optimized for high efficient removal of bacterial and other contamination (solids and liquids) from the suction side of vacuum pumps preventing damage to the pump and the potential biological infection of the surrounding environment. Removed liquids are collected in a transparent flask which can be removed for sterilisation. The efficiency of the installed filter elements exceeds the 0,005 % penetration specified in HTM 2022 for infectious disease units, when tested in accordance with BS 3928.

P-VAC filters are designed for protection of vacuum pumps. These filters are optimized for high-efficient removal of solid particles and other contamination from the suction side of vacuum pumps preventing damage to the pump. Two filtration stages are available for P-VAC filters. Rough prefilter “VACP” removes bulk liquid and large solid particles, while high efficiency microfilter VACM removes very fine impurities which may damage the pump.

AAF O2 series of filter housings have been specifically developed for high efficient removal of solid particles from compressed Oxygen applications.

AAF HT series - Aluminium high temperature compressed air filters are designed for very high efficient removal of solid particles, water and oil aerosols, from compressed air systems in high-temperature applications. To be able to achieve the required compressed air quality, an appropriate filter element (BHT, N25HT, N5HT, XRHT, XMHT, XSHT) must be installed into the filter housing.

AAFs filters are designed for applications in paint industry. Quantity of substances that could cause impairments in paint wetting applications or cause defects in paint work have been reduced to a minimum. To meet the required compressed air quality appropriate “paint compatible” filter element must be installed into filter housing.

SFH condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH cyclone separator it is essential to install automatic or electronic condensate drain. SFH cyclone separators are also available in stainless steel version SFH-SS.

CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.

BF filters are designed for protection of the downstream compressed air system and equipment against defects and other failures. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.