Special valves - Import export

This type is a pneumatically actuated valve with 2 port connections and 2 switching positions. The V2 has been developed for hot gases up to 400°C.

This micro air valve was developed specially as a small signal element for mounting in confined spaces. Its design allows a big orifice at small overall dimensions. Pre-controlled by an air outlet in the integrated tube nipple it only needs a minimum of actuating force to shut off the pilot port.

The compact 3VPHD8 Pharma Dispenser enables precise and reliable dosing of a wide variety of materials. Thanks to the special rotor-stator-geometry, no valve is required to prevent the medium from flowing out independently. Alternating opening chambers ensures gentle product transport and pulsation-free output. The VPHD series was specially developed for applications in the pharmaceutical, biotechnology, medical and food industries. Your advantages: - Interior with optimised dead space - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Works certificate 3.1 (DIN EN 10204) - all surfaces for pharmaceutical applications Ra ≤ 0.8 μm - retraction option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection

The compact 3VPHD12 Pharma Dispenser enables precise and reliable dosing of a wide variety of materials. Thanks to the special rotor-stator geometry, no valve is required to prevent the medium from flowing out independently. Alternating opening chambers ensure gentle product transport and pulsation-free output. The VPHD series was specially developed for applications in the pharmaceutical, biotechnology, medical and food industries. Your advantages: - Interior with optimised dead space - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Works certificate 3.1 (DIN EN 10204) - all surfaces for pharmaceutical applications Ra ≤ 0.8 μm - retraction option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection

The special lightweight aluminium design and silicone inserts of STRATE sandwich non-return valves SB makes them ideal for: Conveying air and gases up to temperatures of 200 °C Working pressures up to 4 bar Special applications with other valve insert materials on request

Stackable cans К.10, К.05, В.01 are fitted with cap KS.TG46 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Stackable can К.20 is equipped with cap KS.TGW 60 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Limit switch Pilot valve Manual override . . . Stainless steel Bronze Brass Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Version with approval according to DIN 161 Degreased version, Silicon or PTFEfree version …

Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.

KAMAT pressure relief valves for our high pressure pumps ensure optimum working pressure at all times. They can be configured to control pressure either by mechanical pre-adjustment or by remote pneumatic control. We are also able to manufacture many of our pressure relief valves in special materials, making them ideal for the process industry. In addition, our control rods are made from ceramic or stellite, making all our valves highly wear resistant.

Valve casting stainless steel impeller Investment Casting Xian Huan-Tai has been specialized in Custom castings include Valve Body, Valve disk,Valve bonnet, Valve gland since 1996. Material options are carbon steel, stainless steel, gray iron, ductile iron, copper etc. to accommodate with different environment. Process include investment castings, sand castings and lost foam castings. Our inspection: 1.Metal testing and analysis, mechanical properties, microstructure, spectrometer and furnace chemical composition analysis. 2.Non-destruction inspection: MPE, LPE, UE and RE 3.Dimension inspection: well experienced inspector team 4.Quality control 5.3rd party inspection 6.Special inspection method agreed by customers like hydraulic, pneumatic test, water tight test etc.

The GEMÜ 566 2/2-way globe control valve has a body with an integrated control mechanism which can be controlled by various operator types. In addition to a pneumatic version, manual and motorized versions are also available. The GEMÜ 566 valve was specially developed for the control of small quantities and enables flow rates from 63l/h to 2500 l/h. —Control of liquid media from 63 l/h to 2500 l/h —Linear or equal-percentage control characteristic options —Three operator types selectable (manual, pneumatic, motorised)

The GEMÜ 1235 electrical position indicator is suitable for mounting to pneumatically operated linear actuators. The position of the valve spindle is electronically detected and evaluated through play-free and non-positive mounting. Intelligent microprocessor controlled functions make commissioning and support during operation easier. The current position of the valve is displayed via high-visibility LEDs and fed back via electrical signals. The GEMÜ 1235 has been specially designed for valves of small, medium and large nominal sizes with a stroke of 2.2 to 74.4 mm. — Communication and programming interface IO-Link — Adjustable switch point tolerances — Speed-AP function for fast mounting and initialisation — High visibility position indicator by LED — Can be fitted to GEMÜ valves or third-party actuators — On-site or remote end position programming via programming input

EN149:2001+ A1:2009 Special Custom Filter Quality Valve with Color Options Highest Protection Lowest Air Resistance Comfortable Breathing TCS for anti-collapse Latex free quality ear loops

EN149:2001+ A1:2009 Special Custom Filter Quality Valve with Color Options Highest Protection Lowest Air Resistance Comfortable Breathing TCS for anti-collapse Latex free quality ear loops

EN149:2001+ A1:2009 Special Custom Filter Quality Valve with Color Options Highest Protection Lowest Air Resistance Comfortable Breathing TCS for anti-collapse Latex free quality ear loops

STAUFF Return Line Simplex Filters SRFL-S and Duplex Filters SRFL-D are designed for in-line hydraulic applications. With its compact construction and the easy to maintain assembly the SRFL-S and SRFL-D Filters are suitable for flow rates up to 7000 l/min / 1850 US GPM. The two housings of the Duplex Filter SRFL-D are connected with a special gate valve that is operated with a level or hand wheel. Therefore the filter may be serviced without shutting down the hydraulic system. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Differential pressure switch with visual gauge indicator Filter Elements ▪ Filter elements of RE series Construction ▪ Two versions: Simplex or Duplex ▪ With switch control for maintenance...

Our experience in filling cylinders has enabled us to develop our own pump technology which has proved its worth in a number of fields in addition to filling cylinders. Pump aggregate NP 10/15 Performance Min./Max.: 150-300 kg/h 0.6-1.2 gal/min Power cons.: 1,5 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 600x400x500mm Weight: 40 kg Pump aggregate NP 25/50 Performance Min./Max.: 400-1000 kg/h Power cons.: 3,0 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 800x600x500mm Weight: 85 kg Pump aggregate NP 25/70 Performance Min./Max.: 600-1500 kg/h Power cons.: 4,0 KW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH):800x600x500mm Weight: 85 kg The following stats are valid for all pumps: Materials Valve casing: Special brass / cast bronze Valves: High grade stainless steel Plunger: Ceramic Sleeves: CO 2/N 2O – resistant compound; fabric reinforced Support rings: Teflon with graphite, run-dry-proof Crankshaft: Drop-forged and case hardened Pump

Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 8MPa. When connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line. Autocatalytic NickelPhosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environmentfriendly.

A single operation makes simultaneous connections for multiple lines that have a variety of different fluids and sizes. A special design minimizes air admixture in fluid lines upon connection. Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 2MPa. When connected, the distance between the socket plate and the plug plate is designed to be 30mm for all sizes. This means that any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line.

Electronic condensate drains EMD series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified. Condensate accumulates in the collecting reservoir. When the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. Special self-cleaning direct acting valve assures reliable operation. Electronic condensate drains - EMD series is also equipped with operation alarm, led indicator, test button and internal strainer. Version with Service Network for diagnostics parameter setting and alarm output is also available.

Possibly one of the simplest filtration units used in industry today, the tipping pan filter is ideal for batch processing rapid-settling, fast-filtering crystalline suspensions. The filter is an open-topped vessel which is fitted with a false base, drainage grids and filter medium. The solid/liquid suspension is fed onto the surface of the pan and, at the same time, vacuum is applied to the base of the pan. The vacuum assists in dewatering the suspension thereby producing a filter cake on the filter medium. The filtered liquid (filtrate) is collected from the base of the pan through a special valve assembly. The filter cake can be washed in the pan as many times as is required by the process to achieve the desired product purity. Once the washing stage has completed, the pan is inverted and the filter cake is discharged.

When operating pneumatic valves (diaphragm valves, etc.) special attention is placed on the protection of the control air system. The 5A compact safety valve reliably protects the control air system against media flowing back in case of leaks. The valve is automatic and therefore provides safety in the application.

Advantages of the benches: - smart irrigation - comfort and productivity - maximum load of 70kg./sqm. - maximize your cultivation space Standard equipment for ebb&flow benches: - galvanised steel structure - perimetral aluminum frame - floodable PVC trays - 1 filter + double way valve - special glue for ebb trays - lateral roll system (mobile benches) Standard equipment for benches with grid support: - galvanized steel structure - support steel grid 40x40x4mm - perimetral aluminum frame - lateral roll system (mobile benches) For more information regarding the benches check out our website or contact us.

Multi-color Intelligent Yarn Dyeing Systems Fancy Master, which has an ergonomic and easy to use construction, is designed to work efficiently with its structure that allows maximum 60 wire thread passes with plc controlled movable arm in desired report size lengths It provides the opportunity to create a soiling pattern and ground pattern color on the yarn and to get different effects on the yarn. It is designed for high efficiency operation with special software and panel design that enables the super nozzle sets to open multiple times within seconds with special electromechanical valves. The system, which is integrated with a 400-rpm rotary spray system with 16 nozzles, 1 to 16 nozzles that can be operated individually, has been specially designed to achieve the desired dot effects on the yarn. There is an automatic controlled cooling system in the dye tank and a mixer to ensure a homogeneous mixture.

Clippard - Functional Simplicity The design of Clippard electronic valves is a deceptively simple arrangement with a minimum of operating parts, and remarkably straight forward low power operation. • The Clippard “spider” is the only moving part and its motion to operate the valve is a mere 0.007” travel. • Low voltage D.C. inputs, signals from simple manual switching up to computer directed systems, move the spider in extremely fast response time . . . 5 to 10 milliseconds. • The unit uses extremely low power (0.67 watts at the rated voltage) and is cool running. The valves are light in weight, compact in physical size and mount easily in space-saving packages. The complete line of EC, EV, ET and EW electronic valves are available with two mounting options. Standard base models have two 6-32 threaded, 7/32” deep mounting holes. Manifold models are equipped with a bottom stud, 5/32” long with #10-32 thread, which fits Clippard standard and special manifolds, accessory valves...

An even smaller Mouse valve! When space is critical, the EM Series Valve provides the best solution. At just over an inch tall, and less than 3/4” in diameter, the EM Valve uses Clippard’s special “spider” design. This reliable and proven design for long life is housed in a miniature body, and incorporates wire leads out the top, allowing body rotation for close-center mounting. In addition, the valve features higher flow; combining fast shifting speed, extremely high cycle life with the design flexibility to make this valve a “small wonder” for demanding applications. This valve is perfect for air and/or gas control, pilot control, and any application where space is limited, but desired performance is not. Note: Simply tighten valves onto the manifold using a standard 1/8" Allen hex wrench.

Rotary valves have for function the distribution or the continuous dosing of pulverulent products. FORPLEX rotary valves was studied specially to be easily adapted to the base of reception hoppers, cyclones, crushers, pneumatic transport and dust removal captation devices... So they are the essential complement to any installation of grinding, pneumatic transport or classification. Using some size of rotary valves, FORPLEX can provide a solution to meet the most demanding powder properties

Implementation: Hand cutting torch for flame cutting To 500 mm Hand torches for gouging Various sizes and lengths Available with DIN, BS and CGA connections For all fuel gasses Advantages: High backfire resistance through injector High consumable durability and resistance to environmental influences due to brass valve body Better ability to dose the Oxygen due to special concept of the valve actuator High stability due to the triangular arrangement of the Stainless Steel pipes High flow rates and easy adjustment of the media through the appropriate design of the monoblock valves Better handling through ergonomic design, high operating comfort Low spare parts stocks required thanks to modular system Scope of supply: Hand cutting torches Scarfing torches Accessories, consumable parts