Stainless steel sleeves - Import export

A4 Stainless Steel Threaded Cylindrical Sleeves There is a variant in A2 stainless steel

A2 Stainless Steel Threaded Cylindrical Sleeves There is a variant in A4 stainless steel

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Category Screw connections, adapter a. accessories / JIC 37° Flared connections / Parts / Supporting sleeves / Metric tubes / Stainless steel Product number supplier 48022800v

Category Low pressure hoses and fittings / Fittings for oil- and fuel hoses / Hose sleeves / Stainless steel Product number supplier 204018v

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

sleeve nut made of stainless steel M8 x 20mm head Ø20mm with hex socket SW5

sleeve nuts made of stainless steel M6x9, M6x12, M6x15 and M6x18 head Ø15mm with hex socket SW5

Characteristics of our HotMicroCoils with reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the sleeve coil heater allows a very good heat transmission to the nozzle. In all our HotMicroCoil heaters with reflection sleeve the assembly of a thermocouple is possible and recommended for bigger diameters and power.

PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts

Sleeve and spring stainless steel. Ball stainless steel or POM. Version: Sleeve bright. Steel ball hardened and bright.

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts

Steel version: Grub screw and indexing pin steel. Stainless steel version: Indexing pin hardened: Threaded sleeve 1.4305. Indexing pin 1.4034. Indexing pin not hardened: Threaded sleeve 1.4305. Indexing pin 1.4305. Mushroom grip black grey thermoplastic. Version: Steel version: Threaded sleeve, black oxidised. Indexing pin hardened, ground and black oxidised. Stainless steel version: Threaded sleeve, bright. Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form C or D is recommended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back.

China Stainless Steel Parts Custom Machining Tube Couplings, Screws,Sleeves Ming Xiao Manufacturing Co., Ltd engaged in Turning Parts manufacturing more than 20 years,after years of upgrading, it has now been equipped more than 100 sets various processing machines, some are advanced precision processing equipment. As a professional turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts. Such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom metal turning Parts for all industries,welcome contact us to discuss about your projects. sales@mxmparts.com

EGE inductive sensors for high mechanical loads still work trouble-free even after 10 impacts of 8 Joule. The sensor protected by a solid stainless steel sleeve is thus particularly resistant to shock and vibration. They are ideal for areas where standard sensors could be damaged mechanically. EGE offers variants resistant to high pressure cleaning with protection class IP 68/IP69 for use at temperatures up to 110° C and contamination-resistant sensors with PTFE coating. The proximity switches are based on the proven inductive principle and switch con tactless when a metallic object moves close. The sensors are particularly suited for heavy duty use, for example in metal processing, during welding and in mobile machinery.

Based on the combined humidity and temperature sensor SHT21 by Sensirion we offer you the DKRF310XXS probe. The sensor is either integrated into a miniaturized stainless steel sleeve (d=4mm, l=20mm) or can be delivered as a tube probe. It provides an I2C output signal.

Spindle extension consisting of a rigid, hot-dip galvanized key rod and a separate, rigid PE protection tube. Square bars 13 × 13 mm, hot-dip galvanized. Operating square suitable for operating key DIN 3223 E (House connection fittings). Connecting pins in stainless steel v2a. Coupling sleeve made of iron GGG40, galvanised, with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent

Spindle extension consisting of a two-piece, hot-dip galvanised steel rod and a separate, adjustable PE protection tube. Rod continuously adjustable with Auszugsicherung and self-supporting in each statement positions. Locking of the set minimum length by a v2a-collar with VA-threaded pin M10. Operating square forged, 12/14 mm, suitable for operating key DIN 3223 E (House connection fittings). Connecting pins in stainless steel v2a. Coupling sleeve made of iron GGG40, galvanised, with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent.

Telescopic spindle extension consisting of a two-piece, hot-dip galvanized steel rod and a verstifteten PE protection tube. steplessly adjustable with Auszugsicherung and self-supporting in each statement positions. Operating square forged, 12/14 mm, suitable for operating key DIN 3223 E (House connection fittings). Dome sleeve made of iron GGG40, galvanised. Connecting pins in stainless steel v2a. Coupling sleeve with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent. Optional: Marking disc, usable on both sides, e.g. for gas or water.

Replacement of the resilient Centring sleeve, guide sleeve of stainless steel 5,5 x 6,0 mm.

This stainless steel sleeve, specially-designed for our detachable ABS-Lock I anchor, is available in a variety of different lengths and can be installed and countered on steel structures. Our ABS-Lock I+II system has been awarded national technical approval (for 2 individuals) and can be sealed up following installation using the plastic cap provided. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 Designed for steel structures For use in combination with our ABS-Lock I anchor

This stainless steel sleeve for concrete and wood, which is permanently installed in the subsurface, has been specially designed to take up an ABS-Lock I anchor. This sleeve is available in a variety of different lengths and can be sealed up using the plastic cap provided. The system has been awarded national technical approval ("abZ") for usage by 2 individuals. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions stated in the "abZ") EN 795:2012, B + CEN/TS 16415:2017 Concrete ≥ C20/25 Wood (min. rafter dimensions: 140mm x 140mm) IMPORTANT: Axial loads may only be applied in wood installations when countered!!

Our experience in filling cylinders has enabled us to develop our own pump technology which has proved its worth in a number of fields in addition to filling cylinders. Pump aggregate NP 10/15 Performance Min./Max.: 150-300 kg/h 0.6-1.2 gal/min Power cons.: 1,5 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 600x400x500mm Weight: 40 kg Pump aggregate NP 25/50 Performance Min./Max.: 400-1000 kg/h Power cons.: 3,0 kW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH): 800x600x500mm Weight: 85 kg Pump aggregate NP 25/70 Performance Min./Max.: 600-1500 kg/h Power cons.: 4,0 KW Motor: 3x400 V, 50/60 Hz Drive: V-Belt Dimensions (LxWxH):800x600x500mm Weight: 85 kg The following stats are valid for all pumps: Materials Valve casing: Special brass / cast bronze Valves: High grade stainless steel Plunger: Ceramic Sleeves: CO 2/N 2O – resistant compound; fabric reinforced Support rings: Teflon with graphite, run-dry-proof Crankshaft: Drop-forged and case hardened Pump

KB RollerTech processes seamless metal belts (stainless steel and nickel). Compared to coated plastic belts, metal belts offer the following advantages: very high thermal conductivity very high physical stability Today, KB RollerTech processes metal belts with the following properties: Properties Nickel belts Stainless steel belts Length < 350 mm < 400 mm Diameter 15 - 50 mm 10 - 100 mm Wall thickness 30 - 500 µm 35 - 100 µm Geometry straight straight and concave Remarks 100 mm diameter only possible with seam Concerning the coatings the following combinations are possible: Nickel belts Stainless steel belts PFA sleeves PFA spray coatings or PFA sleeves Silicone and PFA sleeves Silione and PFA spray coatings or PFA sleeve

RV.10 - light version - length = 100 mm, 2 screws - sleeve (NBR or silicone) - stainless steel sleeve Ø (mm) gasket max. C° RV.10.038.100.2.01.CR 38 NBR black 80 RV.10.038.100.2.02.CR 38 NBR white 110 RV.10.038.100.2.03.CR 38 silicone red 225 RV.10.040.100.2.01.CR 40 NBR black 80 RV.10.040.100.2.02.CR 40 NBR white 110 RV.10.040.100.2.03.CR 40 silicone red 225 RV.10.045.100.2.01.CR 45 NBR black 80 RV.10.048.100.2.01.CR 48 NBR black 80 RV.10.050.100.2.01.CR 50 NBR black 80 RV.10.050.100.2.02.CR 50 NBR white 110 RV.10.050.100.2.03.CR 50 silicone red 225 RV.10.054.100.2.01.CR 54 NBR black 80 RV.10.060.100.2.01.CR 60 NBR black 80 RV.10.060.100.2.02.CR 60 NBR white 110 RV.10.060.100.2.03.CR 60 silicone red 225 RV.10.063.100.2.01.CR 63.5 NBR black 80 RV.10.065.100.2.01.CR 65 NBR black 80 RV.10.065.100.2.02.CR 65 NBR white 110 RV.10.070.100.2.01.CR 70 NBR black 80 RV.10.070.100.2.03.CR 70 silicone red 225 RV.10.076.100.2.01.CR 76 NBR black 80 RV.10.080.100.2.01.CR 80 NBR black...

The LogTag ST100T-15 external sensor is a strong and safe external sensor specifically designed for use with food. This external sensor is suitable for measuring the core temperature of a product. Place the sensor in the food and measure the temperature accurately.