Controllers - Import export

The EPOS2 24/2 DC/EC is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.

The DEC Module 50/5 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 250 watts.

The EPOS2 P 24/5 is a freely programmable positioning controller according IEC 61131-3. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The EPOS2 70/10 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 80 to 700 watts.

The EPOS2 24/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The DEC Module 24/2 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 48 watts.

The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.

The EPOS2 50/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 250 watts.

The ESCON Module 24/2 is a small-sized, powerful 4-quadrant PWM OEM servo controller for the highly efficient control of permanent magnet-activated brushed DC motors and brushless EC motors up to approximately 48 Watts.

Customer benefit • Consistent measurement (without interruption) • Suited to strongly distorted systems, zero crossing or phase-angle controls • I/O interface adaptable to individual requirements • Configuration and measured value acquisition via USB and Modbus interface • Acquisition of minimum and maximum values with time stamp • System analysis (harmonics and unbalance) • Synchronisable real-time clock as a time basis and operating hour counter • Graphic display with freely arranged measured value display and alarm handling • Logger for long-term recording of measured value progressions

KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.

Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers

This machine type is available in several force ranges; detailed information can be found in the prospectus

The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.

The ASCO Dry Ice Pelletizer P55i is one of the most powerful dry ice machines from ASCO's iSeries line. Having a production capacity of 550 kg/h (1'212 lb/h) it meets the demands for high dry ice quantities plus quality and flexibility in the daily working process. As a model of ASCO's iSeries, it is equipped with stateoftheart remote control devices and thus is ready for a wide range of services in the areas of Remote Access, Remote Data, Remote Management. Be it for fast and efficient trouble shooting and maintenance or for gathering production and performance data the ASCO iSeries offers a wide range of possibilities to link Industry 4.0 with dry ice production. The ASCO Dry Ice Pelletizer P55i is driven by two powerful hydraulic units, which are running independently by the push of a button. This allows the production of identical or different pellet sizes in combination with the offered extruder plates at the same time.

The ASCO Dry Ice Pelletizer P28i is a compact and powerful dry ice machine from our iSeries line. Having a production capacity of 280 kg/h (617 lb/h) it meets the demands for higher dry ice quantities plus quality and flexibility in the daily working process. As a model of ASCO's iSeries, it is equipped with stateoftheart remote control devices and thus is ready for a wide range of services in the areas of Remote Access, Remote Data, Remote Management. Be it for fast and efficient trouble shooting and maintenance or for gathering production and performance data the ASCO iSeries offers a wide range of possibilities to link Industry 4.0 with dry ice production. The ASCO Dry Ice Pelletizer P28i is driven by a powerful hydraulic unit featuring instant push button start. All functions are controlled by a Siemens PLC with touch screen.

As a Signal Conditioner, the AN1500M is designed to process and display signals coming from various types of transducers (weight, load, pressure, torque, etc.) that use standard strain-gauge bridges. As a Load Monitor the AN1500M can also receive any signal within the ±150mVDC range coming from a shunt, a converter or any type of transmitter. The Load Monitor provides selectable input ranges (±15mV, ±30mV, ±150mV) and excitation voltages (5V, 10V) to accommodate cells of various types and sensitivities. Two programming methods allow scaling of the meter to operate in the desired engineering units. The basic instrument is a soldered assembly composed of a main board, a tri-color programmable display and a power circuit. Standard features include the reading of the input variable as well as remote (HOLD), the reading and memorization of minimum/maximum values (PEAK/VALLEY), TARE and RESET function, and a full complement of programmable logic functions.

The AN2000C Signal Conditioner & Display is designed to process and display signals coming from various types of transducers (weight, load, pressure, torque, etc.) that use standard strain-gauge bridges. It can also receive any signal within the range ±300mVDC coming from a shunt, a converter or any type of transmitter. The Conditioner provides selectable input ranges (max. ±300mV) and excitation voltages (5V, 10V) to accommodate cells of various types and sensitivities. Two programming methods allow scaling of the meter to operate in the desired engineering units. The basic instrument consists of a PCB assembly including the main board, the display and the power supply filter, to which the A/D conversion circuit and the input option are added. The functions of the basic instrument include the display of the input variable as well as the remote freezing of the display (HOLD), the reading of the stored minimum and maximum values (PEAK & VALLEY) and the TARE function with RESET.

Staying in control has never been easier. Intelligent dc motor control electronics. All current, speed and position controllers are specially designed for brushed DC and brushless DC motors up to 700 W. CANopen or EtherCAT allow for easy integration of your network. The ESCON 4-Q servo controllers provide power and highly precise speed control for maxon brushed DC and brushless DC (maxon EC) motors , in a compact design. For simple speed control applications of brushless DC motors, we offer 1-Q servo amplifiers with a modular design available. All amplifiers feature a variety of useful additional functions. When more than just speed and torque control is required and recurring positioning processes with complex trajectories have to be executed use maxon positioning controllers. With the EPOS2 and EPOS3 (Easy Positioning System) controllers, a modular product line is available for DC brushed and brushless motors. The newest addition to the high-performance range of positioning controllers are the MAXPOS controllers. Current and speed controllers: DEC Module: 1-quadrant brushless DC (maxon EC) motor amplifier for speed control ESCON: 4-quadrant servo controller for current and speed control Positioning controllers: EPOS2: Easy Positioning System with CANopen interface and Interpolated Position Mode EPOS2 P: The programmable positioning controller with CANopen interface EPOS3: Easy Positioning System with EtherCAT interface and CoE (CAN application layer over EtherCAT) MAXPOS: High-performance positioning controller with EtherCAT interface and CoE (CAN application layer over EtherCAT)Cost-effective, Easy speed-control with Hall sensors up to 250 W.

MAXPOS The high-performance positioning motor controller by maxon motor. MAXPOS 50/5 receives movement and I/O commands from a superior EtherCAT master, which carries out the process control. The extremely fast controllers and the diverse feedback options available provide the ideal conditions for the operation of permanent-magnet activated brushed and brushless DC motors in high-performance applications. Raising the bar for precision and synchronisation. MAXPOS 50/5 supports CoE (CAN application layer over EtherCAT). MAXPOS features The Feature Chart provides a quick overview of the most important features: MAXPOS integration MAXPOS Communication Guide provides hints for integration of MAXPOS into several EtherCAT master systems and further application support topics: MAXPOS 50/5 Part number 447293 For brushed DC motors with encoders and brushless DC (maxon EC) motors with Hall sensors and encoders up to 250 W. MAXPOS Setup (complete version) Installation includes: MAXPOS Studio 1.3 (graphical user interface) MAXPOS firmware 0x0121 Documentation (MAXPOS Feature Chart, MAXPOS Setup «Release Notes», Firmware Version of «Readme», Hardware Reference, MAXPOS Application Notes Collection, Firmware Specification, and Application Notes)EtherCAT interface, fast controllers, and diverse feedback options for the operation of brushed DC or brushless DC (maxon EC) motors.

EPOS Positioning made easy. EPOS is a modular, digital positioning controller by maxon motor. It is ideal for permanent-magnet activated brushed DC and brushless DC motors with incremental encoders and an operating range of 1 to 700 W. The wide range of operating modes combined with various command interfaces allow for versatile use in a wide range of drive systems in the fields of automation and mechatronics. EPOS2 See the «Feature Chart» for a quick overview of the entire EPOS2 product range and to compare the different models. EPOS3 EPOS2, EPOS2 P, EPOS3 and MCD Setup (complete version) The installation includes: EPOS Studio 2.1 (graphical user interface) EPOS2 firmware 0x2126 EPOS2 P firmware 0x0205 EPOS3 firmware 0x2211 Open PCS2008 programming environment for EPOS P Documentation (Feature Chart, Release Notes, Getting Started, Cable Starting Set, Hardware Reference, Communication Guide, Firmware Specification, Programming Reference, Supervisory Control Reference, and Application Notes)EPOS (Easy Positioning System) with CANopen or EtherCAT interface and Interpolated Position Mode.

ESCON The user-friendly servo controller program by maxon motor. The ESCON servo controllers are small, powerful 4-quadrant PWM servo controllers for the highly efficient control of permanent magnet-activated DC brushed and brushless motors. The featured operating modes – speed control (closed loop), speed control (open loop), and current control – meet the highest requirements. The ESCON servo controllers are designed to be commanded by an analogue set value. They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. Compare ESCON models. ESCON Feature Chart See the Feature Chart for a quick overview of the entire ESCON range of products and to compare the different models. ESCON Setup (complete version) Installation includes: ESCON Studio 2.2 (graphical user interface) ESCON firmware 0x0150 Documentation (ESCON Feature Chart, ESCON Setup «Release Notes», Firmware Version «Readme», Hardware Reference)Compact, powerful 4-quadrant PMW servo controllers with analog command signals. Easy to configure.

The temperature of jacketed reactors can be controlled by TCUs (temperature control unit) large central heating/cooling units with secondary systems for individual reactor temperature control process steam (in case of large metal reactors) Our jacketed reactors are typically temperature controlled using heat transfer oil and TCU or central heating/cooling units. The heat transfer oil which is pumped through the jacket of the reactor controls the process temperature inside the reactor. The temperature range of the heat transfer oil spans from -80°C up to 300°C (depending on the heat transfer oil used).

Fluoropolymers (ETFE, FEP, PTFE, PFA) Silicone, PEEK ™, Kapton ® Also available in all common UL styles

Liquiline CM442 is a digital multiparameter transmitter for process monitoring and controlling in any application. The 1-/2-channel controller saves you time and money by offering seamless system integration, simple operation and a reduced need for spare part stock. Liquiline CM442 provides you with all the benefits of a best-in-class transmitter platform from clever simplicity to maximum process safety.

Liquiline System CA80CR offers highly accurate online measurement for optimized chromate removal in industrial wastewater. It supports you in achieving environmentally compliant electroplating and tanning processes. Like all Liquiline System analyzers, CA80CR enables plug & play of up to four Memosens sensors - minimizing the installation effort. Automatic calibration and cleaning plus advanced diagnostics with remote access ensure consistent process safety.

Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that's why continuous monitoring of this parameter is essential. The Liquiline System TP analyzer offers precise online measurement of total phosphorus and ensures highest process safety. Automatic calibration and cleaning save you operating costs while advanced diagnostics with remote access support you in providing process documentation to the authorities.

Liquisys CCM253 is a standard chlorine transmitter with integrated pH compensation for free chlorine. It improves your operational safety thanks to continuous plausibility, process and sensor checks. Select from numerous hardware and software modules, such as relays or fieldbus communication, to adapt it exactly to your measuring task. This modularity also allows you to upgrade the transmitter at any time. A simple menu and calibration make configuration and operation fast and easy.